ВПЛИВ УМОВ СПІКАННЯ НА ВЛАСТИВОСТІ І ЕКСПЛУАТАЦІЙНУ СТІЙКІСТЬ ІНСТРУМЕНТУ ІЗ ОСОБЛИВОДРІБНОЗЕРНИСТОГО СПЛАВУ WC-6Со
The results of the study of the influence of the conditions of sintering on the structure, physical and mechanical properties of especially fine-grained solid alloy WC-6Со and the operational stability of the tool from it in conditions of boring of small-diameter openings are presented. It was estab...
Збережено в:
| Дата: | 2019 |
|---|---|
| Автори: | , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
Институт сверхтвердых материалов им. В. Н. Бакуля Национальной академии наук Украины
2019
|
| Теми: | |
| Онлайн доступ: | http://altis-ism.org.ua/index.php/ALTIS/article/view/100 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Tooling materials science |
Репозитарії
Tooling materials science| Резюме: | The results of the study of the influence of the conditions of sintering on the structure, physical and mechanical properties of especially fine-grained solid alloy WC-6Со and the operational stability of the tool from it in conditions of boring of small-diameter openings are presented. It was established that the plates, which are manufactured using the technology of VCS under a specially developed mode of electrical welding during the boring of the 25 mm hole in the 20X13 steel part to provide machining with an accuracy of ± 0.05 mm in length, respectively, of 300 and 200 mm. The price of plates after VCS is 5 times less than the price of plates after the EU. |
|---|