РОЗРАХУНОК КУТІВ ЗСУВУ ПРИ ПРЯМОКУТНОМУ ВІЛЬНОМУ РІЗАННІ З ВІД'ЄМНИМ ПЕРЕДНІМ КУТОМ
The determination of shearing angle in process of free orthogonal cutting of low-plastic carbon-ferrous alloys is provided by analytic method based on mechanical resistance of material machined. There are numerous marks of steels deformation characteristics under the temperature of cutting as well a...
Збережено в:
| Дата: | 2020 |
|---|---|
| Автори: | , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Институт сверхтвердых материалов им. В. Н. Бакуля Национальной академии наук Украины
2020
|
| Теми: | |
| Онлайн доступ: | http://altis-ism.org.ua/index.php/ALTIS/article/view/172 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Tooling materials science |
Репозитарії
Tooling materials science| Резюме: | The determination of shearing angle in process of free orthogonal cutting of low-plastic carbon-ferrous alloys is provided by analytic method based on mechanical resistance of material machined. There are numerous marks of steels deformation characteristics under the temperature of cutting as well as results of experimental turning analyzed. The method proposed enables to calculate shear angles, angles and coefficients of friction, as well as shrinkage of chip dependently of steel mark, relative elongation and relative constriction of steel deformed when turning under the proper cutting temperature. |
|---|