ДОСЛІДЖЕННЯ РОЗРАХУНКОВОЇ ТОВЩИНИ ПОКРИВУ АЛМАЗНИХ ПОРОШКІВ ПРИ ВИКОРИСТАННІ РОЗМІРНИХ ПАРАМЕТРІВ ЗЕРЕН, ОТРИМАНИХ З ДОПОМОГОЮ ПРИЛАДУ DiaInspect.OSM
The applied significance is noted of the coating as a way to improve the performance of products of different functional purposes, in particular abrasive tools. It is stated that an important characteristic of the cover is its thickness. A review of existing publications has shown that ensuring the...
Збережено в:
| Дата: | 2023 |
|---|---|
| Автор: | |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
Институт сверхтвердых материалов им. В. Н. Бакуля Национальной академии наук Украины
2023
|
| Теми: | |
| Онлайн доступ: | http://altis-ism.org.ua/index.php/ALTIS/article/view/275 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Tooling materials science |
Репозитарії
Tooling materials science| Резюме: | The applied significance is noted of the coating as a way to improve the performance of products of different functional purposes, in particular abrasive tools. It is stated that an important characteristic of the cover is its thickness. A review of existing publications has shown that ensuring the optimal value of this characteristic allows to achieve the maximum positive effect from the use of products with a coating applied to their surface. Methodological components of indirect-analytical determination of coating thickness are analyzed. It is proposed to use an ellipsoid as a 3D model of abrasive powder grains in the calculation scheme of such a definition. The results of a comparative study of the thickness of the coating due to the use of an ellipsoid, a sphere and a cube as possible 3D analogues of grain are presented. |
|---|