ВПЛИВ СКЛАДУ ТА ТИСКУ НА МЕХАНІЧНІ ВЛАСТИВОСТІ ТА ЗНОСОСТІЙКІСТЬ СІАЛОНУ
The kinetics of sintering under pressure of 10 and 25 MPa β′-sialons with composition Z = 1.0; 2.0, obtained from powders of silicon nitride with 5% α-phase, 95% β-phase and 79% α-phase, 21% β-phase. It was found that in materials using Si3N4 powder with a high content of α-phase at a pressure of 10...
Gespeichert in:
| Datum: | 2023 |
|---|---|
| Hauptverfasser: | , , |
| Format: | Artikel |
| Sprache: | Ukrainian |
| Veröffentlicht: |
Институт сверхтвердых материалов им. В. Н. Бакуля Национальной академии наук Украины
2023
|
| Schlagworte: | |
| Online Zugang: | http://altis-ism.org.ua/index.php/ALTIS/article/view/278 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Tooling materials science |
Institution
Tooling materials science| id |
oai:ojs2.altis-ism.org.ua:article-278 |
|---|---|
| record_format |
ojs |
| spelling |
oai:ojs2.altis-ism.org.ua:article-2782023-08-28T08:33:35Z INFLUENCE OF COMPOSITION AND PRESSURE ON MECHANICAL PROPERTIES AND WEAR RESISTANCE OF CIALON ВПЛИВ СКЛАДУ ТА ТИСКУ НА МЕХАНІЧНІ ВЛАСТИВОСТІ ТА ЗНОСОСТІЙКІСТЬ СІАЛОНУ Івженко, Вячеслав Ткач, Василь Косенчук, Тамара silicon nitride, aluminum nitride, sialon, pressure sintering, sealing, structure, crack resistance, hardness, wear resistance нітрид кремнію, нітрид алюмінію, сіалон, спікання під тиском, ущільнення, структура, тріщиностійкість, твердість, зносостійкість The kinetics of sintering under pressure of 10 and 25 MPa β′-sialons with composition Z = 1.0; 2.0, obtained from powders of silicon nitride with 5% α-phase, 95% β-phase and 79% α-phase, 21% β-phase. It was found that in materials using Si3N4 powder with a high content of α-phase at a pressure of 10 MPa, the seal passes to a relative density of 0.96 - 0.98, and the amount of liquid phase has little effect on the compaction rate. The porosity, crack resistance, hardness and wear resistance of β′-sialons with composition Z = 1.0 were studied; 2.0, obtained from powders of silicon nitride at a pressure of 25 and 10 MPa. It was found that when using silicon nitride powder with a high content of α-phase, the porosity of the materials is 30-50% lower than when using a powder with a low content. This reduction does not depend on the sintering pressure, and crack resistance, hardness, wear resistance of materials increase by 10-30%. The dependences of crack resistance, hardness and wear resistance of β′-sialons on their composition in the range of Z = 1-3, as well as exposure time during sintering at a pressure of 10 MPa were studied. The process of obtaining products from sialon by hot pressing at a pressure of 10 MPa, which provides wear resistance of the material at the level of wear resistance of sialon sintered at a pressure of 25 MPa. ` Досліджені кінетика спікання під тиском 10 і 25 МПа β′-сіалонів зі складом Z=1,0; 2,0, отриманих з порошків нітриду кремнію з 5% α-фази, 95% β-фази і 79% α-фази, 21% β-фази. Встановлено, що в матеріалах з використанням порошку Si3N4 з високим вмістом α-фази при тиску 10 МПа ущільнення проходить до відносної щільності 0,96 - 0,98, а кількість рідкої фази на швидкість ущільнення практично не впливає. Досліджені пористість, тріщиностійкість, твердість і зносостійкість β′-сіалонів зі складом Z=1,0; 2,0, отриманих з порошків нітриду кремнію при тиску 25 і 10 МПа. Встановлено, що при використуванні порошку нітриду кремнію з високим вмістом α-фази пористість матеріалів менше на 30-50% ніж при використуванні порошку з низьким вмістом. Це зменшення не залежить від тиску при спіканні, а тріщиностійкість, твердість, зносостійкість матеріалів збільшуються на 10-30%. Досліджені залежності тріщиностійкості, твердості і зносостійкості β′-сіалонів від їх складу в інтервалі з Z=1-3, а також часу витримки при спіканні під тиском 10 МПа. Розроблено процес отримання виробів з сіалону методом гарячого пресування при тиску 10 МПа, який забезпечує зносостійкість матеріалу на рівні зносостійкості сіалону, спеченого при тиску 25 МПа. Институт сверхтвердых материалов им. В. Н. Бакуля Национальной академии наук Украины 2023-08-24 Article Article application/pdf http://altis-ism.org.ua/index.php/ALTIS/article/view/278 Інструментальне матеріалознавство; Том 25 № 1 (2022): Інструментальне матеріалознавство; 311-321 Инструментальное материаловедение; Том 25 № 1 (2022): Инструментальное материаловедение; 311-321 Tooling materials science; Vol 25 No 1 (2022): Tooling marerials science; 311-321 2708-7328 2708-731X uk http://altis-ism.org.ua/index.php/ALTIS/article/view/278/252 Авторське право (c) 2022 Інструментальне матеріалознавство |
| institution |
Tooling materials science |
| baseUrl_str |
|
| datestamp_date |
2023-08-28T08:33:35Z |
| collection |
OJS |
| language |
Ukrainian |
| topic |
нітрид кремнію нітрид алюмінію сіалон спікання під тиском ущільнення структура тріщиностійкість твердість зносостійкість |
| spellingShingle |
нітрид кремнію нітрид алюмінію сіалон спікання під тиском ущільнення структура тріщиностійкість твердість зносостійкість Івженко, Вячеслав Ткач, Василь Косенчук, Тамара ВПЛИВ СКЛАДУ ТА ТИСКУ НА МЕХАНІЧНІ ВЛАСТИВОСТІ ТА ЗНОСОСТІЙКІСТЬ СІАЛОНУ |
| topic_facet |
silicon nitride aluminum nitride sialon pressure sintering sealing structure crack resistance hardness wear resistance нітрид кремнію нітрид алюмінію сіалон спікання під тиском ущільнення структура тріщиностійкість твердість зносостійкість |
| format |
Article |
| author |
Івженко, Вячеслав Ткач, Василь Косенчук, Тамара |
| author_facet |
Івженко, Вячеслав Ткач, Василь Косенчук, Тамара |
| author_sort |
Івженко, Вячеслав |
| title |
ВПЛИВ СКЛАДУ ТА ТИСКУ НА МЕХАНІЧНІ ВЛАСТИВОСТІ ТА ЗНОСОСТІЙКІСТЬ СІАЛОНУ |
| title_short |
ВПЛИВ СКЛАДУ ТА ТИСКУ НА МЕХАНІЧНІ ВЛАСТИВОСТІ ТА ЗНОСОСТІЙКІСТЬ СІАЛОНУ |
| title_full |
ВПЛИВ СКЛАДУ ТА ТИСКУ НА МЕХАНІЧНІ ВЛАСТИВОСТІ ТА ЗНОСОСТІЙКІСТЬ СІАЛОНУ |
| title_fullStr |
ВПЛИВ СКЛАДУ ТА ТИСКУ НА МЕХАНІЧНІ ВЛАСТИВОСТІ ТА ЗНОСОСТІЙКІСТЬ СІАЛОНУ |
| title_full_unstemmed |
ВПЛИВ СКЛАДУ ТА ТИСКУ НА МЕХАНІЧНІ ВЛАСТИВОСТІ ТА ЗНОСОСТІЙКІСТЬ СІАЛОНУ |
| title_sort |
вплив складу та тиску на механічні властивості та зносостійкість сіалону |
| title_alt |
INFLUENCE OF COMPOSITION AND PRESSURE ON MECHANICAL PROPERTIES AND WEAR RESISTANCE OF CIALON |
| description |
The kinetics of sintering under pressure of 10 and 25 MPa β′-sialons with composition Z = 1.0; 2.0, obtained from powders of silicon nitride with 5% α-phase, 95% β-phase and 79% α-phase, 21% β-phase. It was found that in materials using Si3N4 powder with a high content of α-phase at a pressure of 10 MPa, the seal passes to a relative density of 0.96 - 0.98, and the amount of liquid phase has little effect on the compaction rate. The porosity, crack resistance, hardness and wear resistance of β′-sialons with composition Z = 1.0 were studied; 2.0, obtained from powders of silicon nitride at a pressure of 25 and 10 MPa. It was found that when using silicon nitride powder with a high content of α-phase, the porosity of the materials is 30-50% lower than when using a powder with a low content. This reduction does not depend on the sintering pressure, and crack resistance, hardness, wear resistance of materials increase by 10-30%. The dependences of crack resistance, hardness and wear resistance of β′-sialons on their composition in the range of Z = 1-3, as well as exposure time during sintering at a pressure of 10 MPa were studied. The process of obtaining products from sialon by hot pressing at a pressure of 10 MPa, which provides wear resistance of the material at the level of wear resistance of sialon sintered at a pressure of 25 MPa. ` |
| publisher |
Институт сверхтвердых материалов им. В. Н. Бакуля Национальной академии наук Украины |
| publishDate |
2023 |
| url |
http://altis-ism.org.ua/index.php/ALTIS/article/view/278 |
| work_keys_str_mv |
AT ívženkovâčeslav influenceofcompositionandpressureonmechanicalpropertiesandwearresistanceofcialon AT tkačvasilʹ influenceofcompositionandpressureonmechanicalpropertiesandwearresistanceofcialon AT kosenčuktamara influenceofcompositionandpressureonmechanicalpropertiesandwearresistanceofcialon AT ívženkovâčeslav vplivskladutatiskunamehaníčnívlastivostítaznosostíjkístʹsíalonu AT tkačvasilʹ vplivskladutatiskunamehaníčnívlastivostítaznosostíjkístʹsíalonu AT kosenčuktamara vplivskladutatiskunamehaníčnívlastivostítaznosostíjkístʹsíalonu |
| first_indexed |
2025-09-24T17:42:01Z |
| last_indexed |
2025-09-24T17:42:01Z |
| _version_ |
1844168068373151744 |