ВПЛИВ ДОМІШКИ НІТРИДУ БОРУ НА ФІЗИКО-МЕХАНІЧНІ ВЛАСТИВОСТІ ТА ЗНОСОСТІЙКІСТЬ СІАЛОНУ
The kinetics of sintering under a pressure of 10 MPa of β′-sialons with Z = 2.0; 3.0 with an admixture of 3% boron nitride was studied. It was found that the BN admixture reduces the rate of compaction of materials at the initial stage of sintering (in the interval of 0-15 min) by 20-25%. At an isot...
Збережено в:
| Дата: | 2024 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
Институт сверхтвердых материалов им. В. Н. Бакуля Национальной академии наук Украины
2024
|
| Теми: | |
| Онлайн доступ: | http://altis-ism.org.ua/index.php/ALTIS/article/view/310 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Tooling materials science |
Репозитарії
Tooling materials science| id |
oai:ojs2.altis-ism.org.ua:article-310 |
|---|---|
| record_format |
ojs |
| spelling |
oai:ojs2.altis-ism.org.ua:article-3102024-02-06T06:49:22Z INFLUENCE OF BORON NITRIDE IMPURITY ON PHYSICAL AND MECHANICAL PROPERTIES AND WEAR RESISTANCE OF SIALON ВПЛИВ ДОМІШКИ НІТРИДУ БОРУ НА ФІЗИКО-МЕХАНІЧНІ ВЛАСТИВОСТІ ТА ЗНОСОСТІЙКІСТЬ СІАЛОНУ Івженко, Вячеслав Косенчук, Тамара Фесенко, Ігор silicon nitride, aluminum nitride, sialon, boron nitride, pressure sintering, sealing, structure, crack resistance, hardness, wear resistance. нітрид кремнію, нітрид алюмінію, сіалон, нітрид бору, спікання під тиском, ущільнення, структура, тріщиностійкість, твердість, зносостійкість. The kinetics of sintering under a pressure of 10 MPa of β′-sialons with Z = 2.0; 3.0 with an admixture of 3% boron nitride was studied. It was found that the BN admixture reduces the rate of compaction of materials at the initial stage of sintering (in the interval of 0-15 min) by 20-25%. At an isothermal holding time of 60 min, the relative compaction decreases from 0.98-0.99 to 0.95-0.96. The porosity, crack resistance, hardness, and wear resistance of β′-sialons with Z = 2.0; 3.0 with an admixture of 1, 2, 3% boron nitride, obtained by sintering at 1750 °C under a pressure of 10 MPa for 30-60 min, were investigated. It has been established that the lowest wear resistance at closed porosity of the material is provided by sialons with composition Z = 2.0 with an admixture of 1% BN, obtained by pressure sintering for 60 min, and with composition Z = 3.0 with an admixture of 1% BN, obtained by pressure sintering for 30 min. The process of producing sialon products by hot pressing at a pressure of 10 MPa, which work in a friction pair with parts made of heat-resistant steel at temperatures up to 1200 °C, has been developed. Досліджена кінетика спікання під тиском 10 МПа β′-сіалонів зі складом Z=2,0; 3,0 з домішкою 3% нітриду бору. Встановлено, що домішка BN зменшує швидкість ущільнення матеріалів на начальній стадії спікання (в інтервалі 0-15 хв.) на 20-25%. При ізотермічній витримці 60 хв. відносне ущільнення зменшується з 0,98-0,99 до 0,95 - 0,96. Досліджені пористість, тріщиностійкість, твердість і зносостійкість β′-сіалонів зі складом Z=2,0; 3,0 з домішкою 1, 2, 3% нітриду бору, отриманих спіканням при 1750°С під тиском 10 МПа на протязі 30-60 хв. Встановлено, що найменшу зносостійкість при закритій пористості матеріалу мають сіалони складом Z=2,0 з домішкою 1% BN, отримані спіканням під тиском на протязі 60 хв., складом Z=3,0 з домішкою 1% BN, отримані спіканням під тиском на протязі 30 хв.. Розроблено процес отримання виробів з сіалону методом гарячого пресування при тиску 10 МПа, які працюють в парі тертя з деталями з жароміцної сталі при температурах до 1200°С. Институт сверхтвердых материалов им. В. Н. Бакуля Национальной академии наук Украины 2024-02-05 Article Article application/pdf http://altis-ism.org.ua/index.php/ALTIS/article/view/310 Інструментальне матеріалознавство; Том 26 № 1 (2023): Інструментальне матеріалознавство; 362-369 Инструментальное материаловедение; Том 26 № 1 (2023): Інструментальне матеріалознавство; 362-369 Tooling materials science; Vol 26 No 1 (2023): Tooling marerials science; 362-369 2708-7328 2708-731X uk http://altis-ism.org.ua/index.php/ALTIS/article/view/310/308 Авторське право (c) 2023 Інструментальне матеріалознавство |
| institution |
Tooling materials science |
| baseUrl_str |
|
| datestamp_date |
2024-02-06T06:49:22Z |
| collection |
OJS |
| language |
Ukrainian |
| topic |
нітрид кремнію нітрид алюмінію сіалон нітрид бору спікання під тиском ущільнення структура тріщиностійкість твердість зносостійкість. |
| spellingShingle |
нітрид кремнію нітрид алюмінію сіалон нітрид бору спікання під тиском ущільнення структура тріщиностійкість твердість зносостійкість. Івженко, Вячеслав Косенчук, Тамара Фесенко, Ігор ВПЛИВ ДОМІШКИ НІТРИДУ БОРУ НА ФІЗИКО-МЕХАНІЧНІ ВЛАСТИВОСТІ ТА ЗНОСОСТІЙКІСТЬ СІАЛОНУ |
| topic_facet |
silicon nitride aluminum nitride sialon boron nitride pressure sintering sealing structure crack resistance hardness wear resistance. нітрид кремнію нітрид алюмінію сіалон нітрид бору спікання під тиском ущільнення структура тріщиностійкість твердість зносостійкість. |
| format |
Article |
| author |
Івженко, Вячеслав Косенчук, Тамара Фесенко, Ігор |
| author_facet |
Івженко, Вячеслав Косенчук, Тамара Фесенко, Ігор |
| author_sort |
Івженко, Вячеслав |
| title |
ВПЛИВ ДОМІШКИ НІТРИДУ БОРУ НА ФІЗИКО-МЕХАНІЧНІ ВЛАСТИВОСТІ ТА ЗНОСОСТІЙКІСТЬ СІАЛОНУ |
| title_short |
ВПЛИВ ДОМІШКИ НІТРИДУ БОРУ НА ФІЗИКО-МЕХАНІЧНІ ВЛАСТИВОСТІ ТА ЗНОСОСТІЙКІСТЬ СІАЛОНУ |
| title_full |
ВПЛИВ ДОМІШКИ НІТРИДУ БОРУ НА ФІЗИКО-МЕХАНІЧНІ ВЛАСТИВОСТІ ТА ЗНОСОСТІЙКІСТЬ СІАЛОНУ |
| title_fullStr |
ВПЛИВ ДОМІШКИ НІТРИДУ БОРУ НА ФІЗИКО-МЕХАНІЧНІ ВЛАСТИВОСТІ ТА ЗНОСОСТІЙКІСТЬ СІАЛОНУ |
| title_full_unstemmed |
ВПЛИВ ДОМІШКИ НІТРИДУ БОРУ НА ФІЗИКО-МЕХАНІЧНІ ВЛАСТИВОСТІ ТА ЗНОСОСТІЙКІСТЬ СІАЛОНУ |
| title_sort |
вплив домішки нітриду бору на фізико-механічні властивості та зносостійкість сіалону |
| title_alt |
INFLUENCE OF BORON NITRIDE IMPURITY ON PHYSICAL AND MECHANICAL PROPERTIES AND WEAR RESISTANCE OF SIALON |
| description |
The kinetics of sintering under a pressure of 10 MPa of β′-sialons with Z = 2.0; 3.0 with an admixture of 3% boron nitride was studied. It was found that the BN admixture reduces the rate of compaction of materials at the initial stage of sintering (in the interval of 0-15 min) by 20-25%. At an isothermal holding time of 60 min, the relative compaction decreases from 0.98-0.99 to 0.95-0.96. The porosity, crack resistance, hardness, and wear resistance of β′-sialons with Z = 2.0; 3.0 with an admixture of 1, 2, 3% boron nitride, obtained by sintering at 1750 °C under a pressure of 10 MPa for 30-60 min, were investigated. It has been established that the lowest wear resistance at closed porosity of the material is provided by sialons with composition Z = 2.0 with an admixture of 1% BN, obtained by pressure sintering for 60 min, and with composition Z = 3.0 with an admixture of 1% BN, obtained by pressure sintering for 30 min. The process of producing sialon products by hot pressing at a pressure of 10 MPa, which work in a friction pair with parts made of heat-resistant steel at temperatures up to 1200 °C, has been developed.
|
| publisher |
Институт сверхтвердых материалов им. В. Н. Бакуля Национальной академии наук Украины |
| publishDate |
2024 |
| url |
http://altis-ism.org.ua/index.php/ALTIS/article/view/310 |
| work_keys_str_mv |
AT ívženkovâčeslav influenceofboronnitrideimpurityonphysicalandmechanicalpropertiesandwearresistanceofsialon AT kosenčuktamara influenceofboronnitrideimpurityonphysicalandmechanicalpropertiesandwearresistanceofsialon AT fesenkoígor influenceofboronnitrideimpurityonphysicalandmechanicalpropertiesandwearresistanceofsialon AT ívženkovâčeslav vplivdomíškinítriduborunafízikomehaníčnívlastivostítaznosostíjkístʹsíalonu AT kosenčuktamara vplivdomíškinítriduborunafízikomehaníčnívlastivostítaznosostíjkístʹsíalonu AT fesenkoígor vplivdomíškinítriduborunafízikomehaníčnívlastivostítaznosostíjkístʹsíalonu |
| first_indexed |
2025-09-24T17:42:05Z |
| last_indexed |
2025-09-24T17:42:05Z |
| _version_ |
1844168071880638465 |