ТЕПЛО- ТА ЕЛЕКТРОПРОВІДНІСТЬ ГАРЯЧЕПРЕСОВАНИХ МАТЕРІАЛІВ СИСТЕМИ ДІЕЛЕКТРИЧНА МАТРИЦЯ / ЕЛЕКТРОПРОВІДНІ ВКЛЮЧЕННЯ (AlN–hВN) / (TiB2–TiAl3)
Dense ceramic composite material (AlN–hВN) / (TiB2–TiAl3) has been prepared by hot pressing; its electrical and thermal conductivity for a range of conductive phase content were measured. Charge transfer mechanism in as-obtained material of the dielectric matrix / conductive inclusions system is dis...
Gespeichert in:
| Datum: | 2025 |
|---|---|
| Hauptverfasser: | Омеляненко, Володимир, Сергієнко, Ніна, Кайдаш, Оксана, Фесенко, Ігор, Кухаренко, Світлана |
| Format: | Artikel |
| Sprache: | Ukrainisch |
| Veröffentlicht: |
Институт сверхтвердых материалов им. В. Н. Бакуля Национальной академии наук Украины
2025
|
| Schlagworte: | |
| Online Zugang: | http://altis-ism.org.ua/index.php/ALTIS/article/view/377 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Tooling materials science |
Institution
Tooling materials scienceÄhnliche Einträge
ДО ПИТАННЯ ПРО ПРУЖНІ ВЛАСТИВОСТІ НІТРИДУ АЛЮМІНІЮ
von: Кайдаш, Оксана, et al.
Veröffentlicht: (2020)
von: Кайдаш, Оксана, et al.
Veröffentlicht: (2020)
СИНТЕЗ КРИСТАЛІВ BNсф З ВИКОРИСТАННЯМ ЯК ЗАТРАВОК МІКРОПОРОШКИ BNсф І BNв
von: Боримський, Іван
Veröffentlicht: (2019)
von: Боримський, Іван
Veröffentlicht: (2019)
ОСОБЛИВОСТІ ФОРМУВАННЯ СТРУКТУРИ КОМПОЗИТІВ СИСТЕМИ сBN-TiC-Al
von: Беженар, Микола, et al.
Veröffentlicht: (2019)
von: Беженар, Микола, et al.
Veröffentlicht: (2019)
ВПЛИВ ДОМІШКИ НІТРИДУ БОРУ НА ФІЗИКО-МЕХАНІЧНІ ВЛАСТИВОСТІ ТА ЗНОСОСТІЙКІСТЬ СІАЛОНУ
von: Івженко, Вячеслав, et al.
Veröffentlicht: (2024)
von: Івженко, Вячеслав, et al.
Veröffentlicht: (2024)
ВПЛИВ ДИСПЕРСНОСТІ ПОРОШКУ МОЛІБДЕНУ НА ФОРМУВАННЯ ДІЕЛЕКТРИЧНИХ ВЛАСТИВОСТЕЙ AlN–КОМПОЗИТІВ
von: Часник, Василь, et al.
Veröffentlicht: (2019)
von: Часник, Василь, et al.
Veröffentlicht: (2019)
Електричні та фотоелектричні властивості гетеропереходів MoN/p-CdTe та MoN/n-CdTe
von: Kovaliuk, Taras, et al.
Veröffentlicht: (2021)
von: Kovaliuk, Taras, et al.
Veröffentlicht: (2021)
ВПЛИВ ОКСИДНИХ ДОБАВОК НА ПРОЦЕС ГАРЯЧОГО ПРЕСУВАННЯ І ЕКСПЛУАТАЦІЙНІ ХАРАКТЕРИСТИКИ ВИПАРНИКІВ
von: Сергієнко, Н. B., et al.
Veröffentlicht: (2022)
von: Сергієнко, Н. B., et al.
Veröffentlicht: (2022)
ОДЕРЖАННЯ ВІЛЬНИМ СПІКАННЯМ ВЕЛИКОГАБАРИТНИХ ДЕТАЛЕЙ З ФУНКЦІОНАЛЬНОГО КОМПОЗИТУ З КЕРАМІЧНОЮ МАТРИЦЕЮ НА ОСНОВІ НІТРИДУ АЛЮМІНІЮ ДЛЯ РОЗРОБКИ ШИРОКОСМУГОВОГО ВИСОКОВОЛЬТНОГО ПІДСИЛЮВАЧА
von: Довгаль, Артем, et al.
Veröffentlicht: (2024)
von: Довгаль, Артем, et al.
Veröffentlicht: (2024)
ВИВЧЕННЯ ПОВЕДІНКИ GaN У КОНТАКТІ З Fe, Fe2-4N і Co/Cr ПРИ ВИСОКИХ ТИСКАХ і ТЕМПЕРАТУРАХ
von: Петруша, І. A., et al.
Veröffentlicht: (2022)
von: Петруша, І. A., et al.
Veröffentlicht: (2022)
ОСОБЛИВОСТІ ВПЛИВУ ДОБАВКИ VN НА СТРУКТУРУ ТА ВЛАСТИВОСТІ КОМПОЗИТУ Fe-Cu-Ni-Sn, ОТРИМАНОГО ГАРЯЧОГО ПРЕСУВАННЯ
von: Мечник, В. А., et al.
Veröffentlicht: (2018)
von: Мечник, В. А., et al.
Veröffentlicht: (2018)
РОЗРОБКА ТЕРМОСТІЙКОГО МАТЕРІАЛУ НА ОСНОВІ НІТРИДУ КРЕМНІЮ З ПІДВИЩЕНОЮ ЗНОСОСТІЙКІСТЮ
von: Івженко, B. B., et al.
Veröffentlicht: (2022)
von: Івженко, B. B., et al.
Veröffentlicht: (2022)
ДОСЛІДЖЕННЯ УЩІЛЬНЕННЯ ЧАСТОК КЕРАМІКИ SIC, WC, AlN МІКРОІНДЕНТУВАННЯМ В НАПІВФАБРИКАТАХ У ФОРМІ КУЛІ З ОТВОРОМ, ОТРИМАНИХ ІНЖЕКЦІЙНИМ ЛИТТЯМ
von: Psiarnetska, Tetiana, et al.
Veröffentlicht: (2023)
von: Psiarnetska, Tetiana, et al.
Veröffentlicht: (2023)
ВПЛИВ СКЛАДУ ТА ТИСКУ НА МЕХАНІЧНІ ВЛАСТИВОСТІ ТА ЗНОСОСТІЙКІСТЬ СІАЛОНУ
von: Івженко, Вячеслав, et al.
Veröffentlicht: (2023)
von: Івженко, Вячеслав, et al.
Veröffentlicht: (2023)
ДОСЛІДЖЕННЯ ЕЛЕКТРИЧНОГО ОПОРУ І ПОГЛИНАННЯ МІКРОХВИЛЬОВОГО ВИПРОМІНЮВАННЯ В КОМПОЗИТАХ AlN–SiC З ВИСОКИМ ВМІСТОМ КАРБІДУ КРЕМНІЮ
von: Часник, Василь, et al.
Veröffentlicht: (2023)
von: Часник, Василь, et al.
Veröffentlicht: (2023)
N - Ti - Al coatings on steels and hard alloys
von: V. H. Khyzhniak, et al.
Veröffentlicht: (2016)
von: V. H. Khyzhniak, et al.
Veröffentlicht: (2016)
Синтез композитного матеріалу O-g-C3N4/TiO2 рутил для фотокаталітичного застосування
von: Bondarenko, M. E., et al.
Veröffentlicht: (2019)
von: Bondarenko, M. E., et al.
Veröffentlicht: (2019)
ОСОБЛИВОСТІ МІКРОСТРУКТУРИ КОМПОЗИТІВ WC‒Co, ЗМІЦНЕНИХ ДОБАВКОЮ CrB2
von: Ратов, Б. Т., et al.
Veröffentlicht: (2022)
von: Ратов, Б. Т., et al.
Veröffentlicht: (2022)
Электроразрядное спекание тугоплавких композитов систем TiN–AlN и B₄C–TiB₂
von: Замула, М.В, et al.
Veröffentlicht: (2009)
von: Замула, М.В, et al.
Veröffentlicht: (2009)
Покрытия системы Ti-Al-N, нанесенные PVD методами
von: Лучанинов, А.А., et al.
Veröffentlicht: (2012)
von: Лучанинов, А.А., et al.
Veröffentlicht: (2012)
Coatings of the Ti-Al-N system deposited by PVD methods
von: A. A. Luchaninov, et al.
Veröffentlicht: (2012)
von: A. A. Luchaninov, et al.
Veröffentlicht: (2012)
Вплив фазового складу матриці TiO2 на оптичні властивості та морфологію осаджених наночастинок C3N4Ox
von: Bondarenko, M. E., et al.
Veröffentlicht: (2020)
von: Bondarenko, M. E., et al.
Veröffentlicht: (2020)
Steel 9XC with diffusion barrier layer of TiN followed by Ti – Al – Cr
von: V. H. Khyzhniak, et al.
Veröffentlicht: (2017)
von: V. H. Khyzhniak, et al.
Veröffentlicht: (2017)
TiN crystal structure features in cBN—TiN—Al composite sintered at high pressures and temperatures
von: N. M. Biliavyna, et al.
Veröffentlicht: (2022)
von: N. M. Biliavyna, et al.
Veröffentlicht: (2022)
Cavitation erosion of Ti-6Al-4V alloy with vacuum-arc TiN and CrN coatings
von: Kuprin, А.S., et al.
Veröffentlicht: (2018)
von: Kuprin, А.S., et al.
Veröffentlicht: (2018)
Durability of the multicomponent nitride coatings based on TiN and (Ti,Al)N deposited by PIII&D method
von: Vasyliev, V.V., et al.
Veröffentlicht: (2015)
von: Vasyliev, V.V., et al.
Veröffentlicht: (2015)
Electric-physical characteristics of pressureless sintered AlN–TiN ceramic composite
von: I. P. Fesenko, et al.
Veröffentlicht: (2022)
von: I. P. Fesenko, et al.
Veröffentlicht: (2022)
ІНСТРУМЕНТАЛЬНИЙ МАТЕРІАЛ З КУБІЧНОГО BN ДЛЯ ОБРОБКИ ВОЛЬФРАМО-КОБАЛЬТОВИХ ТВЕРДИХ СПЛАВІВ
von: Петруша, Ігор, et al.
Veröffentlicht: (2023)
von: Петруша, Ігор, et al.
Veröffentlicht: (2023)
Magnetron sputtered coatings of AlN-TiCrB₂ system
von: Panasyuk, A.D., et al.
Veröffentlicht: (2009)
von: Panasyuk, A.D., et al.
Veröffentlicht: (2009)
Mechanical properties of nanostructured coatings (Ti, Al)N and (Ti, Cr)N, obtained by means of vacuum-arc deposition method
von: S. S. Grankin, et al.
Veröffentlicht: (2014)
von: S. S. Grankin, et al.
Veröffentlicht: (2014)
РОЗРАХУНКИ ТЕМПЕРАТУРНИХ ПОЛІВ У ОСЕРЕДКУ РОБОЧОЇ КОМІРКИ АПАРАТІВ ВИСОКОГО ТИСКУ ТИПУ «ТОРОЇД» ТА «КЗ» ПРИ ОДЕРЖАННІ ОДНОШАРОВИХ НАДТВЕРДИХ КОМПОЗИТІВ СИСТЕМИ cBN–Al–TiС (TiN)
von: Романенко, Ярослав, et al.
Veröffentlicht: (2024)
von: Романенко, Ярослав, et al.
Veröffentlicht: (2024)
Ионно-плазменное покрытие системы AlN-TiB₂-TiSi₂, получение и свойства
von: Азаренков, Н.А., et al.
Veröffentlicht: (2013)
von: Азаренков, Н.А., et al.
Veröffentlicht: (2013)
Structure and mechanical properties of multilayer coatings (TiAlCrY)N/ZrN
von: Novikov, V.Yu., et al.
Veröffentlicht: (2019)
von: Novikov, V.Yu., et al.
Veröffentlicht: (2019)
Метод «очищення» поверхні фоточутливих елементів кремнієвих p-i-n фотодіодів від дислокацій
von: Kukurudziak, M. S.
Veröffentlicht: (2023)
von: Kukurudziak, M. S.
Veröffentlicht: (2023)
Structure and properties of coatings of Ti, Ti36Al, Ti/Al, produced by the method of vacuum arc evaporation
von: A. V. Demchishin, et al.
Veröffentlicht: (2009)
von: A. V. Demchishin, et al.
Veröffentlicht: (2009)
Structure and mechanical properties of multilayer vacuum-arc condensates of Ti/Al and Ti/TiAlSi systems
von: A. V. Demchishin, et al.
Veröffentlicht: (2016)
von: A. V. Demchishin, et al.
Veröffentlicht: (2016)
Oxidation behavior and electrochemical corrosion performance of Ti₃Al alloy with TiAl coating
von: Yanjun Xi, et al.
Veröffentlicht: (2010)
von: Yanjun Xi, et al.
Veröffentlicht: (2010)
Структурные особенности и физико-механические свойства аморфоподобных покрытий AlN–TiB₂–TiSi₂
von: Погребняк, А.Д., et al.
Veröffentlicht: (2015)
von: Погребняк, А.Д., et al.
Veröffentlicht: (2015)
Magnetron sputtering of high temperature composite ceramics AlN-TiB2-TiSi2
von: I. N. Torianik, et al.
Veröffentlicht: (2013)
von: I. N. Torianik, et al.
Veröffentlicht: (2013)
Фізико-хімічні особливості отримання жароміцних ніобієвих сплавів системи Nb-Ti-Al- Cr-Mo методами плавки та порошкової металургії
von: Марич, М.В., et al.
Veröffentlicht: (2025)
von: Марич, М.В., et al.
Veröffentlicht: (2025)
The synthesis of TiAlN composites by condensation of the different arc plasma flows
von: Taran, V.S., et al.
Veröffentlicht: (2005)
von: Taran, V.S., et al.
Veröffentlicht: (2005)
Ähnliche Einträge
-
ДО ПИТАННЯ ПРО ПРУЖНІ ВЛАСТИВОСТІ НІТРИДУ АЛЮМІНІЮ
von: Кайдаш, Оксана, et al.
Veröffentlicht: (2020) -
СИНТЕЗ КРИСТАЛІВ BNсф З ВИКОРИСТАННЯМ ЯК ЗАТРАВОК МІКРОПОРОШКИ BNсф І BNв
von: Боримський, Іван
Veröffentlicht: (2019) -
ОСОБЛИВОСТІ ФОРМУВАННЯ СТРУКТУРИ КОМПОЗИТІВ СИСТЕМИ сBN-TiC-Al
von: Беженар, Микола, et al.
Veröffentlicht: (2019) -
ВПЛИВ ДОМІШКИ НІТРИДУ БОРУ НА ФІЗИКО-МЕХАНІЧНІ ВЛАСТИВОСТІ ТА ЗНОСОСТІЙКІСТЬ СІАЛОНУ
von: Івженко, Вячеслав, et al.
Veröffentlicht: (2024) -
ВПЛИВ ДИСПЕРСНОСТІ ПОРОШКУ МОЛІБДЕНУ НА ФОРМУВАННЯ ДІЕЛЕКТРИЧНИХ ВЛАСТИВОСТЕЙ AlN–КОМПОЗИТІВ
von: Часник, Василь, et al.
Veröffentlicht: (2019)