РОЗРАХУНОК РАЦІОНАЛЬНИХ МОМЕНТІВ ЗГВИНЧУВАННЯ ЗАМКОВИХ РІЗЬБОВИХ З`ЄДНАНЬ БТ ТА ОБТ ЗАДЛЯ БУРІННЯ ГЛИБОКИХ СВЕРДЛОВИН
The paper considers one of the problems of safe construction of deep wells, which is related to the reliability of threaded connections of drill string elements. The reliability of locking threaded connections, for the most part, depends on the value of the screwing torque, which must be optimal. Th...
Збережено в:
| Дата: | 2025 |
|---|---|
| Автор: | |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Институт сверхтвердых материалов им. В. Н. Бакуля Национальной академии наук Украины
2025
|
| Теми: | |
| Онлайн доступ: | http://altis-ism.org.ua/index.php/ALTIS/article/view/426 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Tooling materials science |
Репозитарії
Tooling materials science| _version_ | 1860742115844161536 |
|---|---|
| author | Чернова, Мирослава |
| author_facet | Чернова, Мирослава |
| author_sort | Чернова, Мирослава |
| baseUrl_str | http://altis-ism.org.ua/index.php/ALTIS/oai |
| collection | OJS |
| datestamp_date | 2026-03-26T08:19:14Z |
| description | The paper considers one of the problems of safe construction of deep wells, which is related to the reliability of threaded connections of drill string elements. The reliability of locking threaded connections, for the most part, depends on the value of the screwing torque, which must be optimal. The optimal screwing torque was studied on full-scale samples of threaded connections, which were subjected to cyclic loads on special laboratory equipment.
During the research, strain gauges were used that recorded the load values not only on the threaded connection itself, but also on the nearest parts of the pipe body. Thus, the static strength characteristics of the pipe body, which have mostly always been neglected by scientists, were taken into account.
Based on laboratory studies that require industrial confirmation, the limits of the maximum permissible values of the screwing torque for different sizes of lock threaded connections have been established in order to increase their durability in the conditions of operation of deep wells. In addition to the calculation ratios that make it possible to calculate the stress value in the most dangerous cross-section of the structure, the results of the studies specified in the corresponding tables 1 and 2 are also given for pipes of different strength types under conditions of different values of the Poisson's ratio. All information, in particular, the value of the screwing torque in the tables is given in values corresponding to SI. |
| first_indexed | 2026-03-26T16:19:25Z |
| format | Article |
| id | oai:ojs2.altis-ism.org.ua:article-426 |
| institution | Tooling materials science |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-26T16:19:25Z |
| publishDate | 2025 |
| publisher | Институт сверхтвердых материалов им. В. Н. Бакуля Национальной академии наук Украины |
| record_format | ojs |
| spelling | oai:ojs2.altis-ism.org.ua:article-4262026-03-26T08:19:14Z CALCULATION OF RATIONAL BENDING MOMENTS OF LOCKING THREADED CONNECTIONS BT AND WDP FOR DRILLING DEEP WELLS РОЗРАХУНОК РАЦІОНАЛЬНИХ МОМЕНТІВ ЗГВИНЧУВАННЯ ЗАМКОВИХ РІЗЬБОВИХ З`ЄДНАНЬ БТ ТА ОБТ ЗАДЛЯ БУРІННЯ ГЛИБОКИХ СВЕРДЛОВИН Чернова, Мирослава drill pipe, screwing torque, threaded connection. бурова труба, обертовий момент згвинчування, різьбове з’єднання. The paper considers one of the problems of safe construction of deep wells, which is related to the reliability of threaded connections of drill string elements. The reliability of locking threaded connections, for the most part, depends on the value of the screwing torque, which must be optimal. The optimal screwing torque was studied on full-scale samples of threaded connections, which were subjected to cyclic loads on special laboratory equipment. During the research, strain gauges were used that recorded the load values not only on the threaded connection itself, but also on the nearest parts of the pipe body. Thus, the static strength characteristics of the pipe body, which have mostly always been neglected by scientists, were taken into account. Based on laboratory studies that require industrial confirmation, the limits of the maximum permissible values of the screwing torque for different sizes of lock threaded connections have been established in order to increase their durability in the conditions of operation of deep wells. In addition to the calculation ratios that make it possible to calculate the stress value in the most dangerous cross-section of the structure, the results of the studies specified in the corresponding tables 1 and 2 are also given for pipes of different strength types under conditions of different values of the Poisson's ratio. All information, in particular, the value of the screwing torque in the tables is given in values corresponding to SI. У роботі розглядається одна з проблем безаварійного будівництва глибоких свердловин, котра пов’язана з надійністю різьбового з’єднання елементів бурильної колони. Надійність замкових різьбових з’єднань, у своїй більшості, залежить від величини обертового моменту згвинчування, яким мусить бути оптимальним. Дослідження оптимального обертового моменту згвинчування досліджувались на натурних зразках різьбових з’єднань, які піддавалися циклічним навантаженням на спеціальному лабораторному обладнанні, при цьому застосовувались тензодавачі, що фіксували величини навантажень не лише на самому різьбовому з’єднанні а й на найближчих ділянках тіла труби. Таким чином враховувались статичні міцнісні характеристики тіла труби, якими здебільшого завжди науковці нехтували. На основі лабораторних досліджень, які потребують промислового підтвердження, встановлено межі максимально-допустимих величин обертового моменту згвинчування для різних типорозмірів замкових різьбових з’єднань задля підвищення їх витривалості в умовах експлуатації глибоких свердловин. Окрім розрахункових співвідношень, що дають можливість розрахувати величину напруження у найбільш небезпечному перерізі конструкції, наведено також результати досліджень, зазначені у відповідних таблицях 1 та 2, для труб різних міцнісних типів за умов різної величини коефіцієнта Пуассона. Уся інформаціях, зокрема, величина обертового моменту згвинчування у таблицях подається у величині, що відповідає СІ. Институт сверхтвердых материалов им. В. Н. Бакуля Национальной академии наук Украины 2025-11-21 Article Article application/pdf http://altis-ism.org.ua/index.php/ALTIS/article/view/426 Інструментальне матеріалознавство; Том 1 № 28 (2025): Інструментальне матеріалознавство; 21-27 Инструментальное материаловедение; Том 1 № 28 (2025): Інструментальне матеріалознавство; 21-27 Tooling materials science; Vol 1 No 28 (2025): Tooling materials Science; 21-27 2708-7328 2708-731X uk http://altis-ism.org.ua/index.php/ALTIS/article/view/426/384 Авторське право (c) 2025 Інструментальне матеріалознавство |
| spellingShingle | бурова труба обертовий момент згвинчування різьбове з’єднання. Чернова, Мирослава РОЗРАХУНОК РАЦІОНАЛЬНИХ МОМЕНТІВ ЗГВИНЧУВАННЯ ЗАМКОВИХ РІЗЬБОВИХ З`ЄДНАНЬ БТ ТА ОБТ ЗАДЛЯ БУРІННЯ ГЛИБОКИХ СВЕРДЛОВИН |
| title | РОЗРАХУНОК РАЦІОНАЛЬНИХ МОМЕНТІВ ЗГВИНЧУВАННЯ ЗАМКОВИХ РІЗЬБОВИХ З`ЄДНАНЬ БТ ТА ОБТ ЗАДЛЯ БУРІННЯ ГЛИБОКИХ СВЕРДЛОВИН |
| title_alt | CALCULATION OF RATIONAL BENDING MOMENTS OF LOCKING THREADED CONNECTIONS BT AND WDP FOR DRILLING DEEP WELLS |
| title_full | РОЗРАХУНОК РАЦІОНАЛЬНИХ МОМЕНТІВ ЗГВИНЧУВАННЯ ЗАМКОВИХ РІЗЬБОВИХ З`ЄДНАНЬ БТ ТА ОБТ ЗАДЛЯ БУРІННЯ ГЛИБОКИХ СВЕРДЛОВИН |
| title_fullStr | РОЗРАХУНОК РАЦІОНАЛЬНИХ МОМЕНТІВ ЗГВИНЧУВАННЯ ЗАМКОВИХ РІЗЬБОВИХ З`ЄДНАНЬ БТ ТА ОБТ ЗАДЛЯ БУРІННЯ ГЛИБОКИХ СВЕРДЛОВИН |
| title_full_unstemmed | РОЗРАХУНОК РАЦІОНАЛЬНИХ МОМЕНТІВ ЗГВИНЧУВАННЯ ЗАМКОВИХ РІЗЬБОВИХ З`ЄДНАНЬ БТ ТА ОБТ ЗАДЛЯ БУРІННЯ ГЛИБОКИХ СВЕРДЛОВИН |
| title_short | РОЗРАХУНОК РАЦІОНАЛЬНИХ МОМЕНТІВ ЗГВИНЧУВАННЯ ЗАМКОВИХ РІЗЬБОВИХ З`ЄДНАНЬ БТ ТА ОБТ ЗАДЛЯ БУРІННЯ ГЛИБОКИХ СВЕРДЛОВИН |
| title_sort | розрахунок раціональних моментів згвинчування замкових різьбових з`єднань бт та обт задля буріння глибоких свердловин |
| topic | бурова труба обертовий момент згвинчування різьбове з’єднання. |
| topic_facet | drill pipe screwing torque threaded connection. бурова труба обертовий момент згвинчування різьбове з’єднання. |
| url | http://altis-ism.org.ua/index.php/ALTIS/article/view/426 |
| work_keys_str_mv | AT černovamiroslava calculationofrationalbendingmomentsoflockingthreadedconnectionsbtandwdpfordrillingdeepwells AT černovamiroslava rozrahunokracíonalʹnihmomentívzgvinčuvannâzamkovihrízʹbovihzêdnanʹbttaobtzadlâburínnâglibokihsverdlovin |