ДЕЯКІ ОСОБЛИВОСТІ ОБРОБКИ ВИСОКОМІЦНИХ ТИТАНОВИХ СПЛАВІВ ХОЛОДНИМ ПЛАСТИЧНИМ ДЕФОРМУВАННЯМ
he purpose of this work is to develop a method for reducing the tendency of the machined surface of products made of high-strength titanium alloys with a carbide tool when processed by cold plastic deformation under conditions of high normal and tangential contact stresses, namely, according to the...
Збережено в:
| Дата: | 2025 |
|---|---|
| Автори: | , , , , , , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Институт сверхтвердых материалов им. В. Н. Бакуля Национальной академии наук Украины
2025
|
| Теми: | |
| Онлайн доступ: | http://altis-ism.org.ua/index.php/ALTIS/article/view/440 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Tooling materials science |
Репозитарії
Tooling materials science| _version_ | 1860742117895176192 |
|---|---|
| author | Шейкін, Сергій Погрелюк, Ірина Студенець, Сергій Люховець, Володимир Лаврись, Сергій Ростоцький, Ігор Дідковський, Тимофій |
| author_facet | Шейкін, Сергій Погрелюк, Ірина Студенець, Сергій Люховець, Володимир Лаврись, Сергій Ростоцький, Ігор Дідковський, Тимофій |
| author_sort | Шейкін, Сергій |
| baseUrl_str | http://altis-ism.org.ua/index.php/ALTIS/oai |
| collection | OJS |
| datestamp_date | 2026-03-26T08:19:14Z |
| description | he purpose of this work is to develop a method for reducing the tendency of the machined surface of products made of high-strength titanium alloys with a carbide tool when processed by cold plastic deformation under conditions of high normal and tangential contact stresses, namely, according to the technological scheme of deforming broaching.
The study used the methods of strain measurement and profilometry. The technologies of glow discharge nitriding and thermal diffusion nitriding were used.
It is shown that modifying the machined surface of parts by nitriding allows seven deformation cycles to be performed at a contact pressure of up to 4 GPa without setting. At the same time, the roughness of the machined surface is reduced by 2-5 times.
The results obtained can be used in further research aimed at developing high-performance technologies for finishing the internal surfaces of tubular products made of high-strength titanium alloys. Specifically, they can form the basis of technologies for finishing aircraft hydraulic cylinder housings and other products, including special-purpose ones.
The originality of the approach lies in using nitriding of the treated surface of the products not to increase their surface strength, but to provide them with antifriction properties that provide the necessary level of their resistance to seizing with the tool during deformation broaching operations. |
| first_indexed | 2026-03-26T16:19:27Z |
| format | Article |
| id | oai:ojs2.altis-ism.org.ua:article-440 |
| institution | Tooling materials science |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-26T16:19:27Z |
| publishDate | 2025 |
| publisher | Институт сверхтвердых материалов им. В. Н. Бакуля Национальной академии наук Украины |
| record_format | ojs |
| spelling | oai:ojs2.altis-ism.org.ua:article-4402026-03-26T08:19:14Z SOME FEATURES OF THE PROCESSING OF HIGH-STRENGTH TITANIUM ALLOYS BY COLD PLASTIC DEFORMATION ДЕЯКІ ОСОБЛИВОСТІ ОБРОБКИ ВИСОКОМІЦНИХ ТИТАНОВИХ СПЛАВІВ ХОЛОДНИМ ПЛАСТИЧНИМ ДЕФОРМУВАННЯМ Шейкін, Сергій Погрелюк, Ірина Студенець, Сергій Люховець, Володимир Лаврись, Сергій Ростоцький, Ігор Дідковський, Тимофій High-strength titanium alloys, cold plastic deformation, deformation broaching, thermal diffusion nitriding, glow discharge nitriding, seizing, antifriction properties. Високоміцні титанові сплави, холодне пластичне деформування, деформуюче протягування, термодифузійне азотування, азотування в тліючому розряді, схоплювання, антифрикційні властивості. he purpose of this work is to develop a method for reducing the tendency of the machined surface of products made of high-strength titanium alloys with a carbide tool when processed by cold plastic deformation under conditions of high normal and tangential contact stresses, namely, according to the technological scheme of deforming broaching. The study used the methods of strain measurement and profilometry. The technologies of glow discharge nitriding and thermal diffusion nitriding were used. It is shown that modifying the machined surface of parts by nitriding allows seven deformation cycles to be performed at a contact pressure of up to 4 GPa without setting. At the same time, the roughness of the machined surface is reduced by 2-5 times. The results obtained can be used in further research aimed at developing high-performance technologies for finishing the internal surfaces of tubular products made of high-strength titanium alloys. Specifically, they can form the basis of technologies for finishing aircraft hydraulic cylinder housings and other products, including special-purpose ones. The originality of the approach lies in using nitriding of the treated surface of the products not to increase their surface strength, but to provide them with antifriction properties that provide the necessary level of their resistance to seizing with the tool during deformation broaching operations. Метою цієї роботи є розробка методу зменшення схильності до схоплювання оброблюваної поверхні виробів з високоміцних титанових сплавів з твердосплавним інструментом при обробці холодним пластичним деформуванням в умовах високих нормальних  та дотичних контактних напружень, а саме, за технологічною схемою деформуючого протягування. У дослідженні використовували методи тензометрії та профілометрії. Застосовували технології азотування у тліючому розряді та термодифузійного азотування. Показано, що модифікування оброблюваної поверхні деталей азотуванням дозволяє виконувати сім циклів деформування при контактному тиску до 4 ГПа без схоплювання. При цьому шорсткість обробленої поверхні зменшується у 2-5 разів. Отримані результати можуть бути застосовані у подальших дослідженнях, спрямованих на розробку високопродуктивних технологій фінішної обробки внутрішніх поверхонь трубчастих виробів з високоміцних титанових сплавів. Конкретно вони можуть лягти в основу технологій фінішної обробки корпусів авіаційних гідроциліндрів та інших виробів в тому числі спеціального призначення. Оригінальність підходу полягає у використанні азотування оброблюваної поверхні виробів не для підвищення їх поверхневої міцності, а для надання їм антифрикційних властивостей, що забезпечують необхідний рівень їх стійкості проти схоплювання з інструментом в ході операцій деформуючого протягування. Институт сверхтвердых материалов им. В. Н. Бакуля Национальной академии наук Украины 2025-11-21 Article Article application/pdf http://altis-ism.org.ua/index.php/ALTIS/article/view/440 Інструментальне матеріалознавство; Том 1 № 28 (2025): Інструментальне матеріалознавство; 422-428 Инструментальное материаловедение; Том 1 № 28 (2025): Інструментальне матеріалознавство; 422-428 Tooling materials science; Vol 1 No 28 (2025): Tooling materials Science; 422-428 2708-7328 2708-731X uk http://altis-ism.org.ua/index.php/ALTIS/article/view/440/379 Авторське право (c) 2025 Інструментальне матеріалознавство |
| spellingShingle | Високоміцні титанові сплави холодне пластичне деформування деформуюче протягування термодифузійне азотування азотування в тліючому розряді схоплювання антифрикційні властивості. Шейкін, Сергій Погрелюк, Ірина Студенець, Сергій Люховець, Володимир Лаврись, Сергій Ростоцький, Ігор Дідковський, Тимофій ДЕЯКІ ОСОБЛИВОСТІ ОБРОБКИ ВИСОКОМІЦНИХ ТИТАНОВИХ СПЛАВІВ ХОЛОДНИМ ПЛАСТИЧНИМ ДЕФОРМУВАННЯМ |
| title | ДЕЯКІ ОСОБЛИВОСТІ ОБРОБКИ ВИСОКОМІЦНИХ ТИТАНОВИХ СПЛАВІВ ХОЛОДНИМ ПЛАСТИЧНИМ ДЕФОРМУВАННЯМ |
| title_alt | SOME FEATURES OF THE PROCESSING OF HIGH-STRENGTH TITANIUM ALLOYS BY COLD PLASTIC DEFORMATION |
| title_full | ДЕЯКІ ОСОБЛИВОСТІ ОБРОБКИ ВИСОКОМІЦНИХ ТИТАНОВИХ СПЛАВІВ ХОЛОДНИМ ПЛАСТИЧНИМ ДЕФОРМУВАННЯМ |
| title_fullStr | ДЕЯКІ ОСОБЛИВОСТІ ОБРОБКИ ВИСОКОМІЦНИХ ТИТАНОВИХ СПЛАВІВ ХОЛОДНИМ ПЛАСТИЧНИМ ДЕФОРМУВАННЯМ |
| title_full_unstemmed | ДЕЯКІ ОСОБЛИВОСТІ ОБРОБКИ ВИСОКОМІЦНИХ ТИТАНОВИХ СПЛАВІВ ХОЛОДНИМ ПЛАСТИЧНИМ ДЕФОРМУВАННЯМ |
| title_short | ДЕЯКІ ОСОБЛИВОСТІ ОБРОБКИ ВИСОКОМІЦНИХ ТИТАНОВИХ СПЛАВІВ ХОЛОДНИМ ПЛАСТИЧНИМ ДЕФОРМУВАННЯМ |
| title_sort | деякі особливості обробки високоміцних титанових сплавів холодним пластичним деформуванням |
| topic | Високоміцні титанові сплави холодне пластичне деформування деформуюче протягування термодифузійне азотування азотування в тліючому розряді схоплювання антифрикційні властивості. |
| topic_facet | High-strength titanium alloys cold plastic deformation deformation broaching thermal diffusion nitriding glow discharge nitriding seizing antifriction properties. Високоміцні титанові сплави холодне пластичне деформування деформуюче протягування термодифузійне азотування азотування в тліючому розряді схоплювання антифрикційні властивості. |
| url | http://altis-ism.org.ua/index.php/ALTIS/article/view/440 |
| work_keys_str_mv | AT šejkínsergíj somefeaturesoftheprocessingofhighstrengthtitaniumalloysbycoldplasticdeformation AT pogrelûkírina somefeaturesoftheprocessingofhighstrengthtitaniumalloysbycoldplasticdeformation AT studenecʹsergíj somefeaturesoftheprocessingofhighstrengthtitaniumalloysbycoldplasticdeformation AT lûhovecʹvolodimir somefeaturesoftheprocessingofhighstrengthtitaniumalloysbycoldplasticdeformation AT lavrisʹsergíj somefeaturesoftheprocessingofhighstrengthtitaniumalloysbycoldplasticdeformation AT rostocʹkijígor somefeaturesoftheprocessingofhighstrengthtitaniumalloysbycoldplasticdeformation AT dídkovsʹkijtimofíj somefeaturesoftheprocessingofhighstrengthtitaniumalloysbycoldplasticdeformation AT šejkínsergíj deâkíosoblivostíobrobkivisokomícnihtitanovihsplavívholodnimplastičnimdeformuvannâm AT pogrelûkírina deâkíosoblivostíobrobkivisokomícnihtitanovihsplavívholodnimplastičnimdeformuvannâm AT studenecʹsergíj deâkíosoblivostíobrobkivisokomícnihtitanovihsplavívholodnimplastičnimdeformuvannâm AT lûhovecʹvolodimir deâkíosoblivostíobrobkivisokomícnihtitanovihsplavívholodnimplastičnimdeformuvannâm AT lavrisʹsergíj deâkíosoblivostíobrobkivisokomícnihtitanovihsplavívholodnimplastičnimdeformuvannâm AT rostocʹkijígor deâkíosoblivostíobrobkivisokomícnihtitanovihsplavívholodnimplastičnimdeformuvannâm AT dídkovsʹkijtimofíj deâkíosoblivostíobrobkivisokomícnihtitanovihsplavívholodnimplastičnimdeformuvannâm |