ГЕНЕРАЦІЯ ТИСКУ В РЕАКЦІЙНОМУ ОБ’ЄМІ ПРИ ВИКОРИСТАННІ ШЕСТИПУАНСОННИХ ПРЕСІВ ВИСОКОГО ТИСКУ КИТАЙСЬКОГО ВИРОБНИЦТВА. ОГЛЯД
The review is devoted to the analysis of existing experimental work on the study of pressure generation characteristics in the reaction volume of Chinese-made six-punch high-pressure presses. It is shown that one of the main problems in the operation of HP presses is a decrease in the efficiency of...
Gespeichert in:
| Datum: | 2025 |
|---|---|
| Hauptverfasser: | , , , , , |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Институт сверхтвердых материалов им. В. Н. Бакуля Национальной академии наук Украины
2025
|
| Schlagworte: | |
| Online Zugang: | http://altis-ism.org.ua/index.php/ALTIS/article/view/467 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Tooling materials science |
Institution
Tooling materials science| Zusammenfassung: | The review is devoted to the analysis of existing experimental work on the study of pressure generation characteristics in the reaction volume of Chinese-made six-punch high-pressure presses. It is shown that one of the main problems in the operation of HP presses is a decrease in the efficiency of pressure transmission inside the cell at pressures above 5.5 GPa, which leads to a significant loss of pressure in the reaction volume. The above problem can be overcome by increasing the efficiency of pressure generation in the reaction volume of a cubic press through the creation of hybrid high-pressure cell designs consisting of different modular materials, optimization of the geometric parameters of the reaction volume, and improvement of the physical and mechanical properties of carbide punches. |
|---|