ПАРАМЕТРИ ПЕРЕРІЗУ ЗРІЗУ ПРИ КОСОКУТНОМУ ТОНКОМУ ТОЧІННІ РАДІУСНИМ ІНСТРУМЕНТОМ
This work is present the analysis of influence of the inclination angle of the restraining tool for the radius of cutter for face turning using simulation and by determining the analytical dependencies. For the analysis of the parameters of the cross section at oblique accuracy, was used CAD KOMПAС-...
Gespeichert in:
| Datum: | 2019 |
|---|---|
| Hauptverfasser: | , |
| Format: | Artikel |
| Sprache: | Ukrainian |
| Veröffentlicht: |
Институт сверхтвердых материалов им. В. Н. Бакуля Национальной академии наук Украины
2019
|
| Schlagworte: | |
| Online Zugang: | http://altis-ism.org.ua/index.php/ALTIS/article/view/62 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Tooling materials science |
Institution
Tooling materials science| Zusammenfassung: | This work is present the analysis of influence of the inclination angle of the restraining tool for the radius of cutter for face turning using simulation and by determining the analytical dependencies. For the analysis of the parameters of the cross section at oblique accuracy, was used CAD KOMПAС-3D and software Mathcad. The Differences of this type of processing from the traditional axial turning. From the analysis of the obtained results, it was concluded that the cutters radius in the plan and the inclination angle of the cutter, besides, have the greatest impact on the average layer thickness |
|---|