ПАРАМЕТРИ ПЕРЕРІЗУ ЗРІЗУ ПРИ КОСОКУТНОМУ ТОНКОМУ ТОЧІННІ РАДІУСНИМ ІНСТРУМЕНТОМ
This work is present the analysis of influence of the inclination angle of the restraining tool for the radius of cutter for face turning using simulation and by determining the analytical dependencies. For the analysis of the parameters of the cross section at oblique accuracy, was used CAD KOMПAС-...
Збережено в:
| Дата: | 2019 |
|---|---|
| Автори: | , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
Институт сверхтвердых материалов им. В. Н. Бакуля Национальной академии наук Украины
2019
|
| Теми: | |
| Онлайн доступ: | http://altis-ism.org.ua/index.php/ALTIS/article/view/62 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Tooling materials science |
Репозитарії
Tooling materials science| id |
oai:ojs2.altis-ism.org.ua:article-62 |
|---|---|
| record_format |
ojs |
| spelling |
oai:ojs2.altis-ism.org.ua:article-622019-09-09T07:55:58Z CUTTING SECTION PARAMETRS FOR OBLIQUE FINE TURNING WITH RADIUS TOOL Параметры сечения среза при тонком косоугольном точении радиусным инструментом ПАРАМЕТРИ ПЕРЕРІЗУ ЗРІЗУ ПРИ КОСОКУТНОМУ ТОНКОМУ ТОЧІННІ РАДІУСНИМ ІНСТРУМЕНТОМ Ричев, Сергій Девін, Леонід Fine turning , diamond turning, section cut parameters, oblique turning, surface roughness тонке точіння алмазне точіння параметри перерізу зрізу косокутне точіння шорсткість обробленої поверхні This work is present the analysis of influence of the inclination angle of the restraining tool for the radius of cutter for face turning using simulation and by determining the analytical dependencies. For the analysis of the parameters of the cross section at oblique accuracy, was used CAD KOMПAС-3D and software Mathcad. The Differences of this type of processing from the traditional axial turning. From the analysis of the obtained results, it was concluded that the cutters radius in the plan and the inclination angle of the cutter, besides, have the greatest impact on the average layer thickness В работе проведен анализ влияния угла наклона режущей кромки для радиусного резца при торцевом точении с помощью моделирования и путем определения аналитических зависимостей. Для анализа параметром сечения среза при косоугольном точении использовали среду САПР КОМПАС-3D и систему Mathcad. Установлены отличия такого вида обработки от традиционного продольного точения. С анализа полученных результатов сделан вывод, что радиус резца в плане и угол наклона режущей кромки имеют наибольшее влияние на среднюю толщину среза. В роботі проведений аналіз впливу кута нахилу ріжучої кромки для радісного різця при торцевому точінні за допомогою моделювання та шляхом визначення аналітичних залежностей. Для аналізу параметрів перерізу зрізу при косокутному точінні використовували середовище САПР KOMПAС-3D та систему Mathcad. Встановлені відмінності такого виду обробки від традиційного повздовжнього точіння. З аналізу отриманих результатів зроблено висновок, що радіус різця в плані і кут нахилу ріжучої кромки мають найбільший вплив на середню товщину зрізу. Институт сверхтвердых материалов им. В. Н. Бакуля Национальной академии наук Украины 2019-09-09 Article Article application/pdf http://altis-ism.org.ua/index.php/ALTIS/article/view/62 Інструментальне матеріалознавство; Том 22 (2019); 488-495 Инструментальное материаловедение; Том 22 (2019); 488-495 Tooling materials science; Vol 22 (2019); 488-495 2708-7328 2708-731X uk http://altis-ism.org.ua/index.php/ALTIS/article/view/62/124 Авторське право (c) 2019 Породоруйнівний та металооброблювальний інструмент - техніка і технологія його виготовлення та використання |
| institution |
Tooling materials science |
| baseUrl_str |
|
| datestamp_date |
2019-09-09T07:55:58Z |
| collection |
OJS |
| language |
Ukrainian |
| topic |
тонке точіння алмазне точіння параметри перерізу зрізу косокутне точіння шорсткість обробленої поверхні |
| spellingShingle |
тонке точіння алмазне точіння параметри перерізу зрізу косокутне точіння шорсткість обробленої поверхні Ричев, Сергій Девін, Леонід ПАРАМЕТРИ ПЕРЕРІЗУ ЗРІЗУ ПРИ КОСОКУТНОМУ ТОНКОМУ ТОЧІННІ РАДІУСНИМ ІНСТРУМЕНТОМ |
| topic_facet |
Fine turning diamond turning section cut parameters oblique turning surface roughness тонке точіння алмазне точіння параметри перерізу зрізу косокутне точіння шорсткість обробленої поверхні |
| format |
Article |
| author |
Ричев, Сергій Девін, Леонід |
| author_facet |
Ричев, Сергій Девін, Леонід |
| author_sort |
Ричев, Сергій |
| title |
ПАРАМЕТРИ ПЕРЕРІЗУ ЗРІЗУ ПРИ КОСОКУТНОМУ ТОНКОМУ ТОЧІННІ РАДІУСНИМ ІНСТРУМЕНТОМ |
| title_short |
ПАРАМЕТРИ ПЕРЕРІЗУ ЗРІЗУ ПРИ КОСОКУТНОМУ ТОНКОМУ ТОЧІННІ РАДІУСНИМ ІНСТРУМЕНТОМ |
| title_full |
ПАРАМЕТРИ ПЕРЕРІЗУ ЗРІЗУ ПРИ КОСОКУТНОМУ ТОНКОМУ ТОЧІННІ РАДІУСНИМ ІНСТРУМЕНТОМ |
| title_fullStr |
ПАРАМЕТРИ ПЕРЕРІЗУ ЗРІЗУ ПРИ КОСОКУТНОМУ ТОНКОМУ ТОЧІННІ РАДІУСНИМ ІНСТРУМЕНТОМ |
| title_full_unstemmed |
ПАРАМЕТРИ ПЕРЕРІЗУ ЗРІЗУ ПРИ КОСОКУТНОМУ ТОНКОМУ ТОЧІННІ РАДІУСНИМ ІНСТРУМЕНТОМ |
| title_sort |
параметри перерізу зрізу при косокутному тонкому точінні радіусним інструментом |
| title_alt |
CUTTING SECTION PARAMETRS FOR OBLIQUE FINE TURNING WITH RADIUS TOOL Параметры сечения среза при тонком косоугольном точении радиусным инструментом |
| description |
This work is present the analysis of influence of the inclination angle of the restraining tool for the radius of cutter for face turning using simulation and by determining the analytical dependencies. For the analysis of the parameters of the cross section at oblique accuracy, was used CAD KOMПAС-3D and software Mathcad. The Differences of this type of processing from the traditional axial turning. From the analysis of the obtained results, it was concluded that the cutters radius in the plan and the inclination angle of the cutter, besides, have the greatest impact on the average layer thickness |
| publisher |
Институт сверхтвердых материалов им. В. Н. Бакуля Национальной академии наук Украины |
| publishDate |
2019 |
| url |
http://altis-ism.org.ua/index.php/ALTIS/article/view/62 |
| work_keys_str_mv |
AT ričevsergíj cuttingsectionparametrsforobliquefineturningwithradiustool AT devínleoníd cuttingsectionparametrsforobliquefineturningwithradiustool AT ričevsergíj parametrysečeniâsrezapritonkomkosougolʹnomtočeniiradiusnyminstrumentom AT devínleoníd parametrysečeniâsrezapritonkomkosougolʹnomtočeniiradiusnyminstrumentom AT ričevsergíj parametripererízuzrízuprikosokutnomutonkomutočínníradíusnimínstrumentom AT devínleoníd parametripererízuzrízuprikosokutnomutonkomutočínníradíusnimínstrumentom |
| first_indexed |
2025-09-24T17:41:43Z |
| last_indexed |
2025-09-24T17:41:43Z |
| _version_ |
1850410029936541696 |