ТЕПЛОТА КРИСТАЛІЗАЦІЇ ВИСОКОТЕПЛОПРОВІДНИХ ПОЛІМЕРНИХ КОМПОЗИТІВ НА ОСНОВІ ПОЛІЕТИЛЕНУ ПРИ ЙОГО НАПОВНЕННІ МІКРОЧАСТИНКАМИ МІДІ

The results of experimental studies of the specific heat of crystallization of polymer composites based on polyethylene filled with copper microparticles are presented. Data concerning the effects on the crystallization heat of the studied composites on such factors as the mass fraction of the fille...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Datum:2019
Hauptverfasser: Fialko, N.M., Dinzhos, R.V., Koseva, N.C
Format: Artikel
Sprache:Ukrainian
Veröffentlicht: Institute of Engineering Thermophysics of NAS of Ukraine 2019
Online Zugang:https://ihe.nas.gov.ua/index.php/journal/article/view/334
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:Thermophysics and Thermal Power Engineering

Institution

Thermophysics and Thermal Power Engineering
id oai:ojs2.ihenasgovua.s43.yourdomain.com.ua:article-334
record_format ojs
spelling oai:ojs2.ihenasgovua.s43.yourdomain.com.ua:article-3342019-06-09T10:03:58Z CRYSTALLIZATION HEAT OF HIGH HEAT CONDUCTING POLYMER COMPOSITES BASED ON POLYETHYLENE FILLED WITH COPPER MICROPARTICLES ТЕПЛОТА КРИСТАЛЛИЗАЦИЯ ВЫСОКОТЕПЛОПРОВОДНИХ ПОЛИМЕРНЫХ КОМПОЗИТОВ НА ОСНОВЕ ПОЛИЭТИЛЕНА ПРИ ЕГО НАПОЛНЕНИИ МИКРОЧАСТИЦАМИ МЕДИ ТЕПЛОТА КРИСТАЛІЗАЦІЇ ВИСОКОТЕПЛОПРОВІДНИХ ПОЛІМЕРНИХ КОМПОЗИТІВ НА ОСНОВІ ПОЛІЕТИЛЕНУ ПРИ ЙОГО НАПОВНЕННІ МІКРОЧАСТИНКАМИ МІДІ Fialko, N.M. Dinzhos, R.V. Dinzhos, R.V. Koseva, N.C The results of experimental studies of the specific heat of crystallization of polymer composites based on polyethylene filled with copper microparticles are presented. Data concerning the effects on the crystallization heat of the studied composites on such factors as the mass fraction of the filler and the cooling rate of the composites from the melt are presented. The corresponding studies were performed with a change in the mass fraction of the filler from 0.3% to 4.0% and the cooling velocity of the microcomposite from the melt from 1 K/min to 20 K/min. It is shown that the specific heat of crystallization decreases significantly with increasing speed VT and the mass fraction of the filler ω. The results of the comparison of the values of the specific heat of crystallization of polymer microcomposite, obtained by a method based on the mixing of components in a dry form and in a polymer melt, are presented. It was established that the first of the indicated methods correspond to large values of the heat of crystallization. Приведены результаты экспериментальных исследований удельной теплоты кристаллизации полимерных композитов на основе полиэтилена, наполненных микрочастицами меди. Представлены данные, касающиеся эффектов воздействия на теплоту кристаллизации исследуемых композитов таких факторов, как массовая доля наполнителя и скорость охлаждения композитов из расплава. Представлены результаты сопоставления величин удельной теплоты кристаллизации полимерных микрокомпозитов, полученных на основе метода, базирующегося на смешении компонентов в сухом виде и в расплаве полимера. Наведено результати експериментальних досліджень питомої теплоти кристалізації полімерних композитів на основі поліетилену, наповненого мікрочастинками міді. Представлено дані щодо ефектів впливу на теплоту кристалізації досліджуваних композитів таких факторів, як масова частка наповнювача та швидкість охолодження композитів з розплаву. Подаються результати зіставлення величин питомої теплоти кристалізації полімерних мікрокомпозитів, одержаних на основі методу, що базується на змішуванні компонентів у сухому вигляді та у розплаві полімеру. Institute of Engineering Thermophysics of NAS of Ukraine 2019-05-17 Article Article application/pdf https://ihe.nas.gov.ua/index.php/journal/article/view/334 10.31472/ttpe.2.2019.3 Thermophysics and Thermal Power Engineering; Vol 41 No 2 (2019): Thermophysics and Thermal Power Engineering; 19-26 Теплофизика и Теплоэнергетика; Vol 41 No 2 (2019): Thermophysics and Thermal Power Engineering; 19-26 Теплофізика та Теплоенергетика; Vol 41 No 2 (2019): Thermophysics and Thermal Power Engineering; 19-26 2663-7235 10.31472/ttpe.2.2019 uk https://ihe.nas.gov.ua/index.php/journal/article/view/334/276
institution Thermophysics and Thermal Power Engineering
baseUrl_str
datestamp_date 2019-06-09T10:03:58Z
collection OJS
language Ukrainian
format Article
author Fialko, N.M.
Dinzhos, R.V.
Dinzhos, R.V.
Koseva, N.C
spellingShingle Fialko, N.M.
Dinzhos, R.V.
Dinzhos, R.V.
Koseva, N.C
ТЕПЛОТА КРИСТАЛІЗАЦІЇ ВИСОКОТЕПЛОПРОВІДНИХ ПОЛІМЕРНИХ КОМПОЗИТІВ НА ОСНОВІ ПОЛІЕТИЛЕНУ ПРИ ЙОГО НАПОВНЕННІ МІКРОЧАСТИНКАМИ МІДІ
author_facet Fialko, N.M.
Dinzhos, R.V.
Dinzhos, R.V.
Koseva, N.C
author_sort Fialko, N.M.
title ТЕПЛОТА КРИСТАЛІЗАЦІЇ ВИСОКОТЕПЛОПРОВІДНИХ ПОЛІМЕРНИХ КОМПОЗИТІВ НА ОСНОВІ ПОЛІЕТИЛЕНУ ПРИ ЙОГО НАПОВНЕННІ МІКРОЧАСТИНКАМИ МІДІ
title_short ТЕПЛОТА КРИСТАЛІЗАЦІЇ ВИСОКОТЕПЛОПРОВІДНИХ ПОЛІМЕРНИХ КОМПОЗИТІВ НА ОСНОВІ ПОЛІЕТИЛЕНУ ПРИ ЙОГО НАПОВНЕННІ МІКРОЧАСТИНКАМИ МІДІ
title_full ТЕПЛОТА КРИСТАЛІЗАЦІЇ ВИСОКОТЕПЛОПРОВІДНИХ ПОЛІМЕРНИХ КОМПОЗИТІВ НА ОСНОВІ ПОЛІЕТИЛЕНУ ПРИ ЙОГО НАПОВНЕННІ МІКРОЧАСТИНКАМИ МІДІ
title_fullStr ТЕПЛОТА КРИСТАЛІЗАЦІЇ ВИСОКОТЕПЛОПРОВІДНИХ ПОЛІМЕРНИХ КОМПОЗИТІВ НА ОСНОВІ ПОЛІЕТИЛЕНУ ПРИ ЙОГО НАПОВНЕННІ МІКРОЧАСТИНКАМИ МІДІ
title_full_unstemmed ТЕПЛОТА КРИСТАЛІЗАЦІЇ ВИСОКОТЕПЛОПРОВІДНИХ ПОЛІМЕРНИХ КОМПОЗИТІВ НА ОСНОВІ ПОЛІЕТИЛЕНУ ПРИ ЙОГО НАПОВНЕННІ МІКРОЧАСТИНКАМИ МІДІ
title_sort теплота кристалізації високотеплопровідних полімерних композитів на основі поліетилену при його наповненні мікрочастинками міді
title_alt CRYSTALLIZATION HEAT OF HIGH HEAT CONDUCTING POLYMER COMPOSITES BASED ON POLYETHYLENE FILLED WITH COPPER MICROPARTICLES
ТЕПЛОТА КРИСТАЛЛИЗАЦИЯ ВЫСОКОТЕПЛОПРОВОДНИХ ПОЛИМЕРНЫХ КОМПОЗИТОВ НА ОСНОВЕ ПОЛИЭТИЛЕНА ПРИ ЕГО НАПОЛНЕНИИ МИКРОЧАСТИЦАМИ МЕДИ
description The results of experimental studies of the specific heat of crystallization of polymer composites based on polyethylene filled with copper microparticles are presented. Data concerning the effects on the crystallization heat of the studied composites on such factors as the mass fraction of the filler and the cooling rate of the composites from the melt are presented. The corresponding studies were performed with a change in the mass fraction of the filler from 0.3% to 4.0% and the cooling velocity of the microcomposite from the melt from 1 K/min to 20 K/min. It is shown that the specific heat of crystallization decreases significantly with increasing speed VT and the mass fraction of the filler ω. The results of the comparison of the values of the specific heat of crystallization of polymer microcomposite, obtained by a method based on the mixing of components in a dry form and in a polymer melt, are presented. It was established that the first of the indicated methods correspond to large values of the heat of crystallization.
publisher Institute of Engineering Thermophysics of NAS of Ukraine
publishDate 2019
url https://ihe.nas.gov.ua/index.php/journal/article/view/334
work_keys_str_mv AT fialkonm crystallizationheatofhighheatconductingpolymercompositesbasedonpolyethylenefilledwithcoppermicroparticles
AT dinzhosrv crystallizationheatofhighheatconductingpolymercompositesbasedonpolyethylenefilledwithcoppermicroparticles
AT dinzhosrv crystallizationheatofhighheatconductingpolymercompositesbasedonpolyethylenefilledwithcoppermicroparticles
AT kosevanc crystallizationheatofhighheatconductingpolymercompositesbasedonpolyethylenefilledwithcoppermicroparticles
AT fialkonm teplotakristallizaciâvysokoteploprovodnihpolimernyhkompozitovnaosnovepoliétilenapriegonapolneniimikročasticamimedi
AT dinzhosrv teplotakristallizaciâvysokoteploprovodnihpolimernyhkompozitovnaosnovepoliétilenapriegonapolneniimikročasticamimedi
AT dinzhosrv teplotakristallizaciâvysokoteploprovodnihpolimernyhkompozitovnaosnovepoliétilenapriegonapolneniimikročasticamimedi
AT kosevanc teplotakristallizaciâvysokoteploprovodnihpolimernyhkompozitovnaosnovepoliétilenapriegonapolneniimikročasticamimedi
AT fialkonm teplotakristalízacíívisokoteploprovídnihpolímernihkompozitívnaosnovípolíetilenuprijogonapovnennímíkročastinkamimídí
AT dinzhosrv teplotakristalízacíívisokoteploprovídnihpolímernihkompozitívnaosnovípolíetilenuprijogonapovnennímíkročastinkamimídí
AT dinzhosrv teplotakristalízacíívisokoteploprovídnihpolímernihkompozitívnaosnovípolíetilenuprijogonapovnennímíkročastinkamimídí
AT kosevanc teplotakristalízacíívisokoteploprovídnihpolímernihkompozitívnaosnovípolíetilenuprijogonapovnennímíkročastinkamimídí
first_indexed 2025-12-17T13:55:20Z
last_indexed 2025-12-17T13:55:20Z
_version_ 1851763951571828736