ТЕПЛООБМІН В ГРАДІЄНТНОМУ ТУРБУЛЕНТНОМУ ПОГРАНИЧНОМУ ШАРІ

Effect of pressure gradient on heat transfer in turbulent boundary layer is constantly investigated during creation and improvement of heat exchange equipment for energy, aerospace, chemical and biological systems. The paper deals with problem of steady flow and heat  transfer in turbulent...

Повний опис

Збережено в:
Бібліографічні деталі
Дата:2019
Автори: Avramenko, A.A., Kovetskaya, M.M., Kondratieva, E.A., Sorokina, T.V.
Формат: Стаття
Мова:Ukrainian
Опубліковано: Institute of Engineering Thermophysics of NAS of Ukraine 2019
Онлайн доступ:https://ihe.nas.gov.ua/index.php/journal/article/view/362
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:Thermophysics and Thermal Power Engineering

Репозитарії

Thermophysics and Thermal Power Engineering
Опис
Резюме:Effect of pressure gradient on heat transfer in turbulent boundary layer is constantly investigated during creation and improvement of heat exchange equipment for energy, aerospace, chemical and biological systems. The paper deals with problem of steady flow and heat  transfer in turbulent boundary layer with variable pressure in longitudinal direction. The mathematical model is presented and the analytical solution of heat transfer in the turbulent boundary layer problem at positive and negative pressure gradients is given. Dependences for temperature profiles and coefficient of heat transfer on flow parameters were obtained.  At negative longitudinal pressure gradient (flow acceleration) heat transfer coefficient can both increase and decrease. At beginning of acceleration zone, when laminarization effects are negligible, heat transfer coefficient increases. Then, as the flow laminarization increases, heat transfer coefficient decreases. This is caused by flow of turbulent energy transfers to accelerating flow. In case of positive longitudinal pressure gradient, temperature profile gradient near wall decreases. It is because of decreasing velocity gradient before zone of possible boundary layer separation.