РОЗРОБЛЕННЯ КРІОГЕННОЇ КАЛОРИМЕТРИЧНОЇ СИСТЕМИ ДЛЯ ДОСЛІДЖЕННЯ СТАНУ РІДИН В НЕОДНОРІДНИХ МАТЕРІАЛАХ

The analysis of methods and means of experimental determination of the ratio of free and bound moisture in materials is carried out, and it is shown that most of the available measuring instruments do not allow investigating the ratio of free and bound moisture on representative samples of heterogen...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Datum:2021
Hauptverfasser: Ivanov, S.O., Dekusha, L.V., Vorobiov, L.Y., Dekusha, O.L.
Format: Artikel
Sprache:Ukrainian
Veröffentlicht: Institute of Engineering Thermophysics of NAS of Ukraine 2021
Online Zugang:https://ihe.nas.gov.ua/index.php/journal/article/view/445
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:Thermophysics and Thermal Power Engineering

Institution

Thermophysics and Thermal Power Engineering
Beschreibung
Zusammenfassung:The analysis of methods and means of experimental determination of the ratio of free and bound moisture in materials is carried out, and it is shown that most of the available measuring instruments do not allow investigating the ratio of free and bound moisture on representative samples of heterogeneous materials, therefore there is a need to create a specialized device for these purposes. Thus, the concerned work is aimed to the development of the differential scanning calorimetry method for studying the state of liquids in inhomogeneous materials and the creation of a cryogenic calorimetric system for the implementation of this method. On the basis of the performed analysis, recommendations were formulated for the development of a measuring system that is capable of examining representative samples of heterogeneous materials of various structures without the need for their preliminary grinding. The method of differential scanning calorimetry has been improved for studying the state of water and organic liquids in inhomogeneous materials in a wide temperature range, which is based on the use of a three-cell differential measurement scheme, as well as the use of cells, the configuration of which allows taking into account the peculiarities of inhomogeneous raw materials. A prototype of a cryogenic calorimetric system has been created, and a method for studying the metrological characteristics of such a system has been developed. On the basis of experimental studies, it has been established that the limits of the permissible relative measurement error of using the developed cryogenic calorimetric system are ± 5%, which corresponds to world analogues.