ПІДВИЩЕННЯ ЕФЕКТИВНОСТІ УСТАНОВОК СПАЛЮВАННЯ ПАЛИВ З ПОБУТОВИХ ВІД-ХОДІВ ШЛЯХОМ УТИЛІЗАЦІЇ СКИДНОЇ ТЕПЛОТИ
The work is devoted to research on the creation of recovery exchanger for waste heat exhaust gases of household waste incineration plants. The purpose of the work is to develop a technical solution for the heat recovery exchanger of waste incineration plants (WIP) and determine its thermal efficienc...
Збережено в:
| Дата: | 2024 |
|---|---|
| Автори: | , , , , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
Institute of Engineering Thermophysics of NAS of Ukraine
2024
|
| Онлайн доступ: | https://ihe.nas.gov.ua/index.php/journal/article/view/586 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Thermophysics and Thermal Power Engineering |
Репозитарії
Thermophysics and Thermal Power Engineering| id |
oai:ojs2.ihenasgovua.s43.yourdomain.com.ua:article-586 |
|---|---|
| record_format |
ojs |
| spelling |
oai:ojs2.ihenasgovua.s43.yourdomain.com.ua:article-5862024-05-28T07:47:26Z IMPROVING THE PLANTS EFFICIENCY OF THERMAL INCINERATION HOUSEHOLD WASTE BY RECOVERING WASTE HEAT ПІДВИЩЕННЯ ЕФЕКТИВНОСТІ УСТАНОВОК СПАЛЮВАННЯ ПАЛИВ З ПОБУТОВИХ ВІД-ХОДІВ ШЛЯХОМ УТИЛІЗАЦІЇ СКИДНОЇ ТЕПЛОТИ Fialko, N.M. Navrodska, R.O. Shevchuk, S.І Gnedash, G.О. Martiuk, O.V. The work is devoted to research on the creation of recovery exchanger for waste heat exhaust gases of household waste incineration plants. The purpose of the work is to develop a technical solution for the heat recovery exchanger of waste incineration plants (WIP) and determine its thermal efficiency indicators. The main objectives of the study were to analysis of the modern experience of using the WIP and establish requirements for the creation of a exhaust gas heat recovery exchanger, develop a new technical solution for the heat recovery exchanger, and determine the change patterns in its main thermal indicators in different operating modes of the WIP. The known methods of thermal calculation of heat exchangers and the results of previous studies on the development and implementation of heat recovery equipment operating on dusty gases were used. The results of work on the creation of a new technical solution for an air-heating heat recovery exchanger with the ability to clean working surfaces from dust deposits are presented. The heat exchange surface of the heat recovery exchanger is composed of steel panels formed by tubes with membranes. The tubes applied have circular flow turbulizators on their internal surfaces. Turbulizators provide heat transfer intensification by 1.4 to 1.8 times with a moderate increase in aerodynamic resistance compared to other methods of heat transfer intensification. The regularities of changes in the main indicators of the heat recovery unit in different operating modes during the year in the practical range of changes in its input parameters were established. The research results show that, depending on the initial temperatures of gases and air, the excess air ratio in exhaust gases and the dust level of the working surface, the heat recovery exchanger provides heating capacity of 72-263 kW; cooling of exhaust gases to a temperature of 107-245 °C; heating of air to 96-220 °C. It was also established that the deposition of dust on the heat exchange surface of the heat recovery unit under the considered conditions leads to a decrease in the heating air temperature by 1.3-1.4 times and an increase in the final exhaust gas temperature by 1.1-1.2 times. At the same time, the heating capacity of the heat recovery exchanger is reduced by half. To increase heat recovery efficiency, it is necessary to periodically clean the working surfaces of the heat recovery unit with compressed air. Наведено результати досліджень щодо створення високоефективного утилізатора скидної теплоти димових газів установок спалювання побутових відходів та штучних палив з них. Обґрунтовано нове технічне рішення повітрогрійного теплоутилізатора з можливістю очищення робочих поверхонь від відкладень пилу. Встановлено закономірності зміни основних показників теплоутилізатора в різних режимах його експлуатації протягом року в практичному діапазоні зміни вхідних параметрів теплоносіїв. Institute of Engineering Thermophysics of NAS of Ukraine 2024-05-22 Article Article application/pdf https://ihe.nas.gov.ua/index.php/journal/article/view/586 10.31472/ttpe.2.2024.10 Thermophysics and Thermal Power Engineering; Vol 46 No 2 (2024): Thermophysics and Thermal Power Engineering; 92-99 Теплофизика и Теплоэнергетика; Vol 46 No 2 (2024): Thermophysics and Thermal Power Engineering; 92-99 Теплофізика та Теплоенергетика; Vol 46 No 2 (2024): Thermophysics and Thermal Power Engineering; 92-99 2663-7235 uk https://ihe.nas.gov.ua/index.php/journal/article/view/586/508 https://creativecommons.org/licenses/by/4.0/deed.ru |
| institution |
Thermophysics and Thermal Power Engineering |
| baseUrl_str |
|
| datestamp_date |
2024-05-28T07:47:26Z |
| collection |
OJS |
| language |
Ukrainian |
| format |
Article |
| author |
Fialko, N.M. Navrodska, R.O. Shevchuk, S.І Gnedash, G.О. Martiuk, O.V. |
| spellingShingle |
Fialko, N.M. Navrodska, R.O. Shevchuk, S.І Gnedash, G.О. Martiuk, O.V. ПІДВИЩЕННЯ ЕФЕКТИВНОСТІ УСТАНОВОК СПАЛЮВАННЯ ПАЛИВ З ПОБУТОВИХ ВІД-ХОДІВ ШЛЯХОМ УТИЛІЗАЦІЇ СКИДНОЇ ТЕПЛОТИ |
| author_facet |
Fialko, N.M. Navrodska, R.O. Shevchuk, S.І Gnedash, G.О. Martiuk, O.V. |
| author_sort |
Fialko, N.M. |
| title |
ПІДВИЩЕННЯ ЕФЕКТИВНОСТІ УСТАНОВОК СПАЛЮВАННЯ ПАЛИВ З ПОБУТОВИХ ВІД-ХОДІВ ШЛЯХОМ УТИЛІЗАЦІЇ СКИДНОЇ ТЕПЛОТИ |
| title_short |
ПІДВИЩЕННЯ ЕФЕКТИВНОСТІ УСТАНОВОК СПАЛЮВАННЯ ПАЛИВ З ПОБУТОВИХ ВІД-ХОДІВ ШЛЯХОМ УТИЛІЗАЦІЇ СКИДНОЇ ТЕПЛОТИ |
| title_full |
ПІДВИЩЕННЯ ЕФЕКТИВНОСТІ УСТАНОВОК СПАЛЮВАННЯ ПАЛИВ З ПОБУТОВИХ ВІД-ХОДІВ ШЛЯХОМ УТИЛІЗАЦІЇ СКИДНОЇ ТЕПЛОТИ |
| title_fullStr |
ПІДВИЩЕННЯ ЕФЕКТИВНОСТІ УСТАНОВОК СПАЛЮВАННЯ ПАЛИВ З ПОБУТОВИХ ВІД-ХОДІВ ШЛЯХОМ УТИЛІЗАЦІЇ СКИДНОЇ ТЕПЛОТИ |
| title_full_unstemmed |
ПІДВИЩЕННЯ ЕФЕКТИВНОСТІ УСТАНОВОК СПАЛЮВАННЯ ПАЛИВ З ПОБУТОВИХ ВІД-ХОДІВ ШЛЯХОМ УТИЛІЗАЦІЇ СКИДНОЇ ТЕПЛОТИ |
| title_sort |
підвищення ефективності установок спалювання палив з побутових від-ходів шляхом утилізації скидної теплоти |
| title_alt |
IMPROVING THE PLANTS EFFICIENCY OF THERMAL INCINERATION HOUSEHOLD WASTE BY RECOVERING WASTE HEAT |
| description |
The work is devoted to research on the creation of recovery exchanger for waste heat exhaust gases of household waste incineration plants. The purpose of the work is to develop a technical solution for the heat recovery exchanger of waste incineration plants (WIP) and determine its thermal efficiency indicators. The main objectives of the study were to analysis of the modern experience of using the WIP and establish requirements for the creation of a exhaust gas heat recovery exchanger, develop a new technical solution for the heat recovery exchanger, and determine the change patterns in its main thermal indicators in different operating modes of the WIP. The known methods of thermal calculation of heat exchangers and the results of previous studies on the development and implementation of heat recovery equipment operating on dusty gases were used. The results of work on the creation of a new technical solution for an air-heating heat recovery exchanger with the ability to clean working surfaces from dust deposits are presented. The heat exchange surface of the heat recovery exchanger is composed of steel panels formed by tubes with membranes. The tubes applied have circular flow turbulizators on their internal surfaces. Turbulizators provide heat transfer intensification by 1.4 to 1.8 times with a moderate increase in aerodynamic resistance compared to other methods of heat transfer intensification. The regularities of changes in the main indicators of the heat recovery unit in different operating modes during the year in the practical range of changes in its input parameters were established. The research results show that, depending on the initial temperatures of gases and air, the excess air ratio in exhaust gases and the dust level of the working surface, the heat recovery exchanger provides heating capacity of 72-263 kW; cooling of exhaust gases to a temperature of 107-245 °C; heating of air to 96-220 °C. It was also established that the deposition of dust on the heat exchange surface of the heat recovery unit under the considered conditions leads to a decrease in the heating air temperature by 1.3-1.4 times and an increase in the final exhaust gas temperature by 1.1-1.2 times. At the same time, the heating capacity of the heat recovery exchanger is reduced by half. To increase heat recovery efficiency, it is necessary to periodically clean the working surfaces of the heat recovery unit with compressed air. |
| publisher |
Institute of Engineering Thermophysics of NAS of Ukraine |
| publishDate |
2024 |
| url |
https://ihe.nas.gov.ua/index.php/journal/article/view/586 |
| work_keys_str_mv |
AT fialkonm improvingtheplantsefficiencyofthermalincinerationhouseholdwastebyrecoveringwasteheat AT navrodskaro improvingtheplantsefficiencyofthermalincinerationhouseholdwastebyrecoveringwasteheat AT shevchuksí improvingtheplantsefficiencyofthermalincinerationhouseholdwastebyrecoveringwasteheat AT gnedashgo improvingtheplantsefficiencyofthermalincinerationhouseholdwastebyrecoveringwasteheat AT martiukov improvingtheplantsefficiencyofthermalincinerationhouseholdwastebyrecoveringwasteheat AT fialkonm pídviŝennâefektivnostíustanovokspalûvannâpalivzpobutovihvídhodívšlâhomutilízacíískidnoíteploti AT navrodskaro pídviŝennâefektivnostíustanovokspalûvannâpalivzpobutovihvídhodívšlâhomutilízacíískidnoíteploti AT shevchuksí pídviŝennâefektivnostíustanovokspalûvannâpalivzpobutovihvídhodívšlâhomutilízacíískidnoíteploti AT gnedashgo pídviŝennâefektivnostíustanovokspalûvannâpalivzpobutovihvídhodívšlâhomutilízacíískidnoíteploti AT martiukov pídviŝennâefektivnostíustanovokspalûvannâpalivzpobutovihvídhodívšlâhomutilízacíískidnoíteploti |
| first_indexed |
2025-12-17T13:56:06Z |
| last_indexed |
2025-12-17T13:56:06Z |
| _version_ |
1851763999957319680 |