Вплив суміщення наводнювання з іншими видами обробки розплаву на формування та якість виливків з алюмінієвих сплавів: Processy litʹâ, 2019, Tom 135, №3, p.3-13
Received 02.04.2019 УДК 669.715:669.788 It has been experimentally proved that hydrogenation of liquid aluminum alloys before pouring into molds can reduce and even eliminate the defect castings in hot brittleness, lattices, leaks of metal-consuming units. However, this usually does not draw attenti...
Збережено в:
| Дата: | 2019 |
|---|---|
| Автор: | |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
National Academy of Sciences of Ukraine, Physical-Technological Institute of Metals and Alloys of NAS of Ukraine
2019
|
| Теми: | |
| Онлайн доступ: | https://plit-periodical.org.ua/index.php/plit/article/view/129 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Casting Processes |
Репозитарії
Casting Processes| id |
oai:ojs2.localhost:article-129 |
|---|---|
| record_format |
ojs |
| spelling |
oai:ojs2.localhost:article-1292023-06-22T10:24:18Z Influence of Melt Hydrogenation with Other Types of Processing on Formation and Quality of Castings from Aluminum Alloys: Processy litʹâ, 2019, Tom 135, №3, p.3-13 Вплив суміщення наводнювання з іншими видами обробки розплаву на формування та якість виливків з алюмінієвих сплавів: Processy litʹâ, 2019, Tom 135, №3, p.3-13 Котлярський, Ф. М. алюмінієві сплави виливки розплав наводнення модифікування рафінування газоусадочні дефекти aluminum alloys casting melt hydrogenation modification refining gas shrinkage defects Received 02.04.2019 УДК 669.715:669.788 It has been experimentally proved that hydrogenation of liquid aluminum alloys before pouring into molds can reduce and even eliminate the defect castings in hot brittleness, lattices, leaks of metal-consuming units. However, this usually does not draw attention to the fact that the same melt in parallel can be modified, including the introduction of chips, or refining. Such a combination may have an unexpected effect on the quality of the casting. The work shows that combining the hydrogenation with the introduction of chips leads to a sharp increase and uneven distribution of gas porosity, which is undesirable. Flux modification due to the reduction of Al2O3 particles in the melt accelerates the diffusion removal of hydrogen, therefore, the melt should be cast soon after hydrogenation. Combining with strontium modifying at optimum holding can significantly increase strength and ductility. A method has been developed for determining the length of pores, which helps to understand the mechanisms of their formation and improve the tightness of cast products. Поступила 02.04.2019 УДК 669.715:669.788 Експериментально доведено, що наводнення рідких алюмінієвих сплавів перед заливкою в ливарні форми можна зменшити і навіть усунути брак виливків по гарячеламкості, утяжинам, негерметичності металомістких вузлів. Однак при цьому зазвичай не звертають увагу на те, що цей же розплав паралельно може піддаватися модифікуванню, в тому числі введенню стружки, або рафінуванню. Таке суміщення може призвести до непередбаченого впливу на якість виливка. В роботі показано, що суміщення наводнення з введенням стружки призводить до різкого збільшення і нерівномірного розподілу газової пористості, що небажано. Модифікування флюсом через зниження в розплаві кількості частинок Al2O3 прискорює дифузійне видалення водню, через що розливку розплаву слід робити незабаром після наводнення. Поєднання з модифікуванням стронцієм при оптимальній витримці дозволяє істотно підвищити міцність та пластичність. Розроблена методика визначення протяжності пор, що допомагає розібратися в механізмах їх утворення та покращити герметичність литих виробів. National Academy of Sciences of Ukraine, Physical-Technological Institute of Metals and Alloys of NAS of Ukraine 2019-10-22 Article Article application/pdf https://plit-periodical.org.ua/index.php/plit/article/view/129 Casting processes; Casting processes №3 (135) 2019; 3-13 Процеси лиття; Процеси лиття №3 (135) 2019; 3-13 2707-1626 0235-5884 uk https://plit-periodical.org.ua/index.php/plit/article/view/129/136 Авторське право (c) 2019 Ф. М. Котлярський https://creativecommons.org/licenses/by-nc-nd/4.0/ |
| institution |
Casting Processes |
| baseUrl_str |
|
| datestamp_date |
2023-06-22T10:24:18Z |
| collection |
OJS |
| language |
Ukrainian |
| topic |
алюмінієві сплави виливки розплав наводнення модифікування рафінування газоусадочні дефекти |
| spellingShingle |
алюмінієві сплави виливки розплав наводнення модифікування рафінування газоусадочні дефекти Котлярський, Ф. М. Вплив суміщення наводнювання з іншими видами обробки розплаву на формування та якість виливків з алюмінієвих сплавів: Processy litʹâ, 2019, Tom 135, №3, p.3-13 |
| topic_facet |
алюмінієві сплави виливки розплав наводнення модифікування рафінування газоусадочні дефекти aluminum alloys casting melt hydrogenation modification refining gas shrinkage defects |
| format |
Article |
| author |
Котлярський, Ф. М. |
| author_facet |
Котлярський, Ф. М. |
| author_sort |
Котлярський, Ф. М. |
| title |
Вплив суміщення наводнювання з іншими видами обробки розплаву на формування та якість виливків з алюмінієвих сплавів: Processy litʹâ, 2019, Tom 135, №3, p.3-13 |
| title_short |
Вплив суміщення наводнювання з іншими видами обробки розплаву на формування та якість виливків з алюмінієвих сплавів: Processy litʹâ, 2019, Tom 135, №3, p.3-13 |
| title_full |
Вплив суміщення наводнювання з іншими видами обробки розплаву на формування та якість виливків з алюмінієвих сплавів: Processy litʹâ, 2019, Tom 135, №3, p.3-13 |
| title_fullStr |
Вплив суміщення наводнювання з іншими видами обробки розплаву на формування та якість виливків з алюмінієвих сплавів: Processy litʹâ, 2019, Tom 135, №3, p.3-13 |
| title_full_unstemmed |
Вплив суміщення наводнювання з іншими видами обробки розплаву на формування та якість виливків з алюмінієвих сплавів: Processy litʹâ, 2019, Tom 135, №3, p.3-13 |
| title_sort |
вплив суміщення наводнювання з іншими видами обробки розплаву на формування та якість виливків з алюмінієвих сплавів: processy litʹâ, 2019, tom 135, №3, p.3-13 |
| title_alt |
Influence of Melt Hydrogenation with Other Types of Processing on Formation and Quality of Castings from Aluminum Alloys: Processy litʹâ, 2019, Tom 135, №3, p.3-13 |
| description |
Received 02.04.2019
УДК 669.715:669.788
It has been experimentally proved that hydrogenation of liquid aluminum alloys before pouring into molds can reduce and even eliminate the defect castings in hot brittleness, lattices, leaks of metal-consuming units. However, this usually does not draw attention to the fact that the same melt in parallel can be modified, including the introduction of chips, or refining. Such a combination may have an unexpected effect on the quality of the casting. The work shows that combining the hydrogenation with the introduction of chips leads to a sharp increase and uneven distribution of gas porosity, which is undesirable. Flux modification due to the reduction of Al2O3 particles in the melt accelerates the diffusion removal of hydrogen, therefore, the melt should be cast soon after hydrogenation. Combining with strontium modifying at optimum holding can significantly increase strength and ductility. A method has been developed for determining the length of pores, which helps to understand the mechanisms of their formation and improve the tightness of cast products. |
| publisher |
National Academy of Sciences of Ukraine, Physical-Technological Institute of Metals and Alloys of NAS of Ukraine |
| publishDate |
2019 |
| url |
https://plit-periodical.org.ua/index.php/plit/article/view/129 |
| work_keys_str_mv |
AT kotlârsʹkijfm influenceofmelthydrogenationwithothertypesofprocessingonformationandqualityofcastingsfromaluminumalloysprocessylitʹa2019tom1353p313 AT kotlârsʹkijfm vplivsumíŝennânavodnûvannâzínšimividamiobrobkirozplavunaformuvannâtaâkístʹvilivkívzalûmíníêvihsplavívprocessylitʹa2019tom1353p313 |
| first_indexed |
2025-09-24T17:40:56Z |
| last_indexed |
2025-09-24T17:40:56Z |
| _version_ |
1844168117492645888 |