Шляхи інтенсифікації теплообмінних процесів в кристалізаторі машини безперервного лиття заготівок: Processy litʹâ, 2019, Tom 134, №2, p.3-14
Received 09.01.2019 UDK 536.24:66.065.5 By the method of physical modeling, the processes of heat transfer between the solidified metal and the caster mold during continuous casting of steel are studied. The laws governing changes in the amount of heat transferred from the liquid metal to the solidi...
Збережено в:
| Дата: | 2019 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
National Academy of Sciences of Ukraine, Physical-Technological Institute of Metals and Alloys of NAS of Ukraine
2019
|
| Теми: | |
| Онлайн доступ: | https://plit-periodical.org.ua/index.php/plit/article/view/137 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Casting Processes |
Репозитарії
Casting Processes| Резюме: | Received 09.01.2019
UDK 536.24:66.065.5
By the method of physical modeling, the processes of heat transfer between the solidified metal and the caster mold during continuous casting of steel are studied. The laws governing changes in the amount of heat transferred from the liquid metal to the solidified crust, from the surface of the workpiece to the wall of the mold and from it to the cooling water are established. Practical recommendations are proposed for increasing the efficiency of heat transfer for the indicated stages of heat transfer from the solidifying metal to the cooling water. |
|---|