ЗАСТОСУВАННЯ «ГАРЯЧОГО» РОЗЧИНЕННЯ ПІНОПОЛІСТИРОЛОВИХ МОДЕЛЕЙ ПРИ ОТРИМАННІ ВИЛИВКІВ В ОБОЛОНКОВІ ФОРМИ З КОМПЛЕКСНОМОДИФІКОВАНОЇ КЕРАМІКИ
The results of investigations of ways of intensifying the process of dissolution of casting models from different types of expanded polystyrene by the method of «hot» dissolution are given. The influence of the thermo-temporal conditions of the process for several kinds of solvents is established. A...
Збережено в:
| Дата: | 2018 |
|---|---|
| Автори: | , , , , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
National Academy of Sciences of Ukraine, Physical-Technological Institute of Metals and Alloys of NAS of Ukraine
2018
|
| Теми: | |
| Онлайн доступ: | https://plit-periodical.org.ua/index.php/plit/article/view/157 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Casting Processes |
Репозитарії
Casting Processes| Резюме: | The results of investigations of ways of intensifying the process of dissolution of casting models from different types of expanded polystyrene by the method of «hot» dissolution are given. The influence of the thermo-temporal conditions of the process for several kinds of solvents is established. Advantages of the proposed method are shown in comparison with investment casting for both theimprovement of surface quality and the reduction of time costs in obtaining complex-shaped castings |
|---|