ОЦЕНКА ВОЗМОЖНОСТИ ИЗГОТОВЛЕНИЯ И РЕМОНТА ДЕТАЛЕЙ МЕТОДОМ АДДИТИВНЫХ ТЕХНОЛОГИЙ ИЗ АЛЮМИНИЕВЫХ СПЛАВОВ
Estimation of possibility of manufacturing and repairing of large-sized components GTE by the method of plasma surfacing using adding material – wire – is carried out in this work. A comparative analysis of the structure, the chemical composition and the mechanical properties of the billets obtained...
Збережено в:
| Дата: | 2018 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
National Academy of Sciences of Ukraine, Physical-Technological Institute of Metals and Alloys of NAS of Ukraine
2018
|
| Теми: | |
| Онлайн доступ: | https://plit-periodical.org.ua/index.php/plit/article/view/175 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Casting Processes |
Репозитарії
Casting Processes| Резюме: | Estimation of possibility of manufacturing and repairing of large-sized components GTE by the method of plasma surfacing using adding material – wire – is carried out in this work. A comparative analysis of the structure, the chemical composition and the mechanical properties of the billets obtained by plasma surfacing in comparison with conventional methods such as foundry and forging are performed. Estimation of possibility of repairing with use of this method is carried out. |
|---|