ИССЛЕДОВАНИЕ ПРОЦЕССА ПОЛУЧЕНИЯ ПЕНОПОЛИСТИРОЛОВЫХ МОДЕЛЕЙ С МАКРОАРМИРУЮЩИМИ ЭЛЕМЕНТАМИ
In the article the scheme and features of process of manufacturing of foam polystyrene models with macro-reinforcing phase by an autoclave method are given. Investigation of the sintering process of reinforced models in an autoclave showed that with increasing thickness and weight of the reinforceme...
Збережено в:
| Дата: | 2018 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
National Academy of Sciences of Ukraine, Physical-Technological Institute of Metals and Alloys of NAS of Ukraine
2018
|
| Теми: | |
| Онлайн доступ: | https://plit-periodical.org.ua/index.php/plit/article/view/176 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Casting Processes |
Репозитарії
Casting Processes| Резюме: | In the article the scheme and features of process of manufacturing of foam polystyrene models with macro-reinforcing phase by an autoclave method are given. Investigation of the sintering process of reinforced models in an autoclave showed that with increasing thickness and weight of the reinforcement, the sintering time of the model increases. |
|---|