УСЛОВИЯ ПОЛУЧЕНИЯ СПЛАВОВ СО СТРУКТУРОЙ ЗАМОРОЖЕННОЙ МИКРОЭМУЛЬСИИ И МГД-ТЕХНОЛОГИЯ ВЫПЛАВКИ РАСПЛАВА МЕДИ С УЛЬТРАДИСПЕРСНЫМИ КАПЛЯМИ НА ОСНОВЕ FeCrC
The factors affecting the formation of a homogeneous emulsion with ultradisperse drops (<1 μm) in melts with an immiscibility region and the formation of a «frozen microemulsion» structure in a cast state are investigated. The technologies of obtaining monotectic copper alloys with dispersed...
Збережено в:
| Дата: | 2018 |
|---|---|
| Автори: | , , , , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
National Academy of Sciences of Ukraine, Physical-Technological Institute of Metals and Alloys of NAS of Ukraine
2018
|
| Теми: | |
| Онлайн доступ: | https://plit-periodical.org.ua/index.php/plit/article/view/195 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Casting Processes |
Репозитарії
Casting Processes| Резюме: | The factors affecting the formation of a homogeneous emulsion with ultradisperse drops (<1 μm) in melts with an immiscibility region and the formation of a «frozen microemulsion» structure in a cast state are investigated. The technologies of obtaining monotectic copper alloys with dispersed reinforced inclusions based on FeCrC, which ensure the size of the strengthening phase > 3 μm are considered. A new MHD-technology has been developed for the production of special copper alloys strengthened by ultradispersed and uniformly distributed inclusions based on FeCrC, with increased performance characteristics. |
|---|