Підвищення теплостійкості та властивостей штампової сталі з регулюванням аустенітного перетворення при експлуатації
Steels with adjustable austenitic transformation during the exploitation (RAPE) are designed for applied in the temperature range of 800 – 950 °C, which corresponds to the austenitic structure, but at the lower temperature range (630 – 650 °C) te...
Gespeichert in:
| Datum: | 2019 |
|---|---|
| Hauptverfasser: | , , , , |
| Format: | Artikel |
| Sprache: | Ukrainisch |
| Veröffentlicht: |
Physico- Technological Institute of Metals and Alloys of the NAS of Ukraine
2019
|
| Schlagworte: | |
| Online Zugang: | https://momjournal.org.ua/index.php/mom/article/view/2019-2-3 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Metal Science and Treatment of Metals |
Institution
Metal Science and Treatment of Metals| _version_ | 1856543746785542144 |
|---|---|
| author | Sydorchuk, O. M. Myroniuk, D. V. Radchenko, O. K. Gogaev, K. O. Hongguang, Ye. |
| author_facet | Sydorchuk, O. M. Myroniuk, D. V. Radchenko, O. K. Gogaev, K. O. Hongguang, Ye. |
| author_sort | Sydorchuk, O. M. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-09-04T10:27:20Z |
| description | Steels with adjustable austenitic transformation during the exploitation (RAPE) are designed for applied in the temperature range of 800 – 950 °C, which corresponds to the austenitic structure, but at the lower temperature range (630 – 650 °C) tempering fragility of the second kind occurs, which makes it difficult to operate. This is inconvenient when the die tool works in a wide range of temperatures during deformation of various metals and alloys. An improved steel composition (4H4N5M3F2) (RAPE) for press molds for hot pressing of copper and its alloys at temperatures of 630 – 650 °C is proposed. Steel was obtained by electroslag remelting, it was heat treated and the properties were determined. It is shown that the heat resistance of the investigated steel is higher by 2 HRC than the heat resistance of steels grade 4H5MF1S and 3H3M3F, which are used under the same operating conditions. The yield strength and impact strength of steel 4H4N5M4F2 considerably exceeds the characteristics of steel 3H3M3F (high –grade rolled products). The annealing temperature limits, which allow obtaining the necessary technological properties of steel, were established. It is shown that the steel structure consists of two areas: dark (obviously it is released martensite) and light (the area with a lower content of the carbide component). With an increase in tempering temperature from 640 to 660 °C, the hardness (HV) of the dark and light components decreases from 478.6 to 459.8 and from 427.8 to 376.0, respectively. The heat resistance of the investigated steel after quenching and tempering in optimal conditions increased to 650 °C (41 HRC). |
| first_indexed | 2025-09-24T17:41:05Z |
| format | Article |
| id | oai:ojs2.localhost:article-211 |
| institution | Metal Science and Treatment of Metals |
| language | Ukrainian |
| last_indexed | 2025-12-17T12:07:34Z |
| publishDate | 2019 |
| publisher | Physico- Technological Institute of Metals and Alloys of the NAS of Ukraine |
| record_format | ojs |
| spelling | oai:ojs2.localhost:article-2112023-09-04T10:27:20Z Increase of heat resistance and properties of die steel with control of austenitic transformation during operation Підвищення теплостійкості та властивостей штампової сталі з регулюванням аустенітного перетворення при експлуатації Sydorchuk, O. M. Myroniuk, D. V. Radchenko, O. K. Gogaev, K. O. Hongguang, Ye. штампова сталь склад термічна обробка механічні властивості теплостійкість die steel thermal treatment mechanical properties heat‑resisting quality Steels with adjustable austenitic transformation during the exploitation (RAPE) are designed for applied in the temperature range of 800 – 950 °C, which corresponds to the austenitic structure, but at the lower temperature range (630 – 650 °C) tempering fragility of the second kind occurs, which makes it difficult to operate. This is inconvenient when the die tool works in a wide range of temperatures during deformation of various metals and alloys. An improved steel composition (4H4N5M3F2) (RAPE) for press molds for hot pressing of copper and its alloys at temperatures of 630 – 650 °C is proposed. Steel was obtained by electroslag remelting, it was heat treated and the properties were determined. It is shown that the heat resistance of the investigated steel is higher by 2 HRC than the heat resistance of steels grade 4H5MF1S and 3H3M3F, which are used under the same operating conditions. The yield strength and impact strength of steel 4H4N5M4F2 considerably exceeds the characteristics of steel 3H3M3F (high –grade rolled products). The annealing temperature limits, which allow obtaining the necessary technological properties of steel, were established. It is shown that the steel structure consists of two areas: dark (obviously it is released martensite) and light (the area with a lower content of the carbide component). With an increase in tempering temperature from 640 to 660 °C, the hardness (HV) of the dark and light components decreases from 478.6 to 459.8 and from 427.8 to 376.0, respectively. The heat resistance of the investigated steel after quenching and tempering in optimal conditions increased to 650 °C (41 HRC). Запропонований покращений склад сталі (4Х4Н5М3Ф2) для прес-форм для гарячого пресування міді та її сплавів. Сталь одержали методом електрошлакового переплаву, провели її термічну обробку та визначили властивості. Показано, що теплостійкість дослідженої сталі вища на 2 HRC за теплостійкість сталей 4Х5МФ1С та 3Х3М3Ф, які використовуються у таких же експлуатаційних умовах. Межа плинності та ударна в’язкість сталі 4Х4Н5М4Ф2 значно перевищує характеристики сталі 3Х3М3Ф (сортовий прокат). Physico- Technological Institute of Metals and Alloys of the NAS of Ukraine 2019-06-30 Article Article application/pdf https://momjournal.org.ua/index.php/mom/article/view/2019-2-3 10.15407/mom2019.02.019 Scientific Technical Journal; Vol. 25 No. 2 (2019): The Scientific Technical journal Metal Science and Treatment of Metals; 19-25 Науково-технічний журнал; Том 25 № 2 (2019): Науково-технічний журнал Металознавство та обробка металів; 19-25 2664-2441 2073-9583 10.15407/mom2019.02 uk https://momjournal.org.ua/index.php/mom/article/view/2019-2-3/2019-2-3 Copyright (c) 2023 Scientific Technical Journal https://creativecommons.org/licenses/by-nc-nd/4.0 |
| spellingShingle | штампова сталь склад термічна обробка механічні властивості теплостійкість Sydorchuk, O. M. Myroniuk, D. V. Radchenko, O. K. Gogaev, K. O. Hongguang, Ye. Підвищення теплостійкості та властивостей штампової сталі з регулюванням аустенітного перетворення при експлуатації |
| title | Підвищення теплостійкості та властивостей штампової сталі з регулюванням аустенітного перетворення при експлуатації |
| title_alt | Increase of heat resistance and properties of die steel with control of austenitic transformation during operation |
| title_full | Підвищення теплостійкості та властивостей штампової сталі з регулюванням аустенітного перетворення при експлуатації |
| title_fullStr | Підвищення теплостійкості та властивостей штампової сталі з регулюванням аустенітного перетворення при експлуатації |
| title_full_unstemmed | Підвищення теплостійкості та властивостей штампової сталі з регулюванням аустенітного перетворення при експлуатації |
| title_short | Підвищення теплостійкості та властивостей штампової сталі з регулюванням аустенітного перетворення при експлуатації |
| title_sort | підвищення теплостійкості та властивостей штампової сталі з регулюванням аустенітного перетворення при експлуатації |
| topic | штампова сталь склад термічна обробка механічні властивості теплостійкість |
| topic_facet | штампова сталь склад термічна обробка механічні властивості теплостійкість die steel thermal treatment mechanical properties heat‑resisting quality |
| url | https://momjournal.org.ua/index.php/mom/article/view/2019-2-3 |
| work_keys_str_mv | AT sydorchukom increaseofheatresistanceandpropertiesofdiesteelwithcontrolofaustenitictransformationduringoperation AT myroniukdv increaseofheatresistanceandpropertiesofdiesteelwithcontrolofaustenitictransformationduringoperation AT radchenkook increaseofheatresistanceandpropertiesofdiesteelwithcontrolofaustenitictransformationduringoperation AT gogaevko increaseofheatresistanceandpropertiesofdiesteelwithcontrolofaustenitictransformationduringoperation AT hongguangye increaseofheatresistanceandpropertiesofdiesteelwithcontrolofaustenitictransformationduringoperation AT sydorchukom pídviŝennâteplostíjkostítavlastivostejštampovoístalízregulûvannâmaustenítnogoperetvorennâpriekspluatacíí AT myroniukdv pídviŝennâteplostíjkostítavlastivostejštampovoístalízregulûvannâmaustenítnogoperetvorennâpriekspluatacíí AT radchenkook pídviŝennâteplostíjkostítavlastivostejštampovoístalízregulûvannâmaustenítnogoperetvorennâpriekspluatacíí AT gogaevko pídviŝennâteplostíjkostítavlastivostejštampovoístalízregulûvannâmaustenítnogoperetvorennâpriekspluatacíí AT hongguangye pídviŝennâteplostíjkostítavlastivostejštampovoístalízregulûvannâmaustenítnogoperetvorennâpriekspluatacíí |