Управління властивостями високоміцних алюмінієвих сплавів системи Al-Zn-Mg-Cu для запобігання передчасному руйнуванню
High-strength aluminum alloys of V93T1, V93hpT3, 1933T3, made of forged or stamped semi-finished products, along with duralumin, are the main material for the design elements of airframes. The work on improving the service characteristics of the alloy B93 has been under way for more than six decades...
Збережено в:
| Дата: | 2019 |
|---|---|
| Автори: | , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico- Technological Institute of Metals and Alloys of the NAS of Ukraine
2019
|
| Теми: | |
| Онлайн доступ: | https://momjournal.org.ua/index.php/mom/article/view/2019-2-6 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal Science and Treatment of Metals |
Репозитарії
Metal Science and Treatment of Metals| _version_ | 1856543749406982144 |
|---|---|
| author | Abolikhina, O.V. Chernega, S.M. |
| author_facet | Abolikhina, O.V. Chernega, S.M. |
| author_sort | Abolikhina, O.V. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-09-04T10:27:20Z |
| description | High-strength aluminum alloys of V93T1, V93hpT3, 1933T3, made of forged or stamped semi-finished products, along with duralumin, are the main material for the design elements of airframes. The work on improving the service characteristics of the alloy B93 has been under way for more than six decades since its inception due to the optimization of the composition, the introduction of new alloyed microadditives and the use of step-by-step heat treatment This allowed the creation of an improved alloy of 1933, which replaced the AK6 and B93 alloys. However, as shown by the experience of using the alloy in 1933, in the conditions of long-acting alternating loads and aggressive media, it is still sensitive to stress concentrators and is prone to fatigue and corrosion fatigue. The paper shows the history of the development of high-strength alloys of the Al-Zn-Mg-Cu system used in aircraft of different generations. |
| first_indexed | 2025-09-24T17:41:06Z |
| format | Article |
| id | oai:ojs2.localhost:article-214 |
| institution | Metal Science and Treatment of Metals |
| language | Ukrainian |
| last_indexed | 2025-12-17T12:07:34Z |
| publishDate | 2019 |
| publisher | Physico- Technological Institute of Metals and Alloys of the NAS of Ukraine |
| record_format | ojs |
| spelling | oai:ojs2.localhost:article-2142023-09-04T10:27:20Z Control the properties of high-strength aluminum alloy systems Al-Zn-Mg-Cu to prevent premature failure Управління властивостями високоміцних алюмінієвих сплавів системи Al-Zn-Mg-Cu для запобігання передчасному руйнуванню Abolikhina, O.V. Chernega, S.M. алюмінієві сплави міцність пластичність корозійна стійкість планер літака aluminium alloys strength plasticity corrosion resistance airplane glider High-strength aluminum alloys of V93T1, V93hpT3, 1933T3, made of forged or stamped semi-finished products, along with duralumin, are the main material for the design elements of airframes. The work on improving the service characteristics of the alloy B93 has been under way for more than six decades since its inception due to the optimization of the composition, the introduction of new alloyed microadditives and the use of step-by-step heat treatment This allowed the creation of an improved alloy of 1933, which replaced the AK6 and B93 alloys. However, as shown by the experience of using the alloy in 1933, in the conditions of long-acting alternating loads and aggressive media, it is still sensitive to stress concentrators and is prone to fatigue and corrosion fatigue. The paper shows the history of the development of high-strength alloys of the Al-Zn-Mg-Cu system used in aircraft of different generations. Високоміцні алюмінієві сплави В93Т1, В93пчТ3, 1933Т3, що виготовляються з кованих або штампованих напівфабрикатів, поряд з дуралюмінами, є основним матеріалом для високонавантажених елементів конструкції планера літаків. Протягом кількох десятиліть від моменту створення першого кувального сплаву В93Т1, ведеться робота з удосконалення його службових характеристик за рахунок оптимізації складу, введення нових легуючих мікродобавок та застосування ступінчастої термообробки. Це дозволило створити покращений сплав 1933, який замінив сплави АК6 і В93. Однак, як показав досвід застосування сплаву 1933, в умовах тривалих знакозмінних навантажень та агресивних середовищ він все ще чутливий до концентраторів напружень і проявляє схильність до втомного і корозійного руйнування. Показана історія розвитку високоміцних алюмінієвих сплавів системи легування Al-Zn-Mg-Cu, застосовуваних у конструкціях літаків різних поколінь. Physico- Technological Institute of Metals and Alloys of the NAS of Ukraine 2019-06-30 Article Article application/pdf https://momjournal.org.ua/index.php/mom/article/view/2019-2-6 10.15407/mom2019.02.044 Scientific Technical Journal; Vol. 25 No. 2 (2019): The Scientific Technical journal Metal Science and Treatment of Metals; 44-51 Науково-технічний журнал; Том 25 № 2 (2019): Науково-технічний журнал Металознавство та обробка металів; 44-51 2664-2441 2073-9583 10.15407/mom2019.02 uk https://momjournal.org.ua/index.php/mom/article/view/2019-2-6/2019-2-6 Copyright (c) 2023 Scientific Technical Journal https://creativecommons.org/licenses/by-nc-nd/4.0 |
| spellingShingle | алюмінієві сплави міцність пластичність корозійна стійкість планер літака Abolikhina, O.V. Chernega, S.M. Управління властивостями високоміцних алюмінієвих сплавів системи Al-Zn-Mg-Cu для запобігання передчасному руйнуванню |
| title | Управління властивостями високоміцних алюмінієвих сплавів системи Al-Zn-Mg-Cu для запобігання передчасному руйнуванню |
| title_alt | Control the properties of high-strength aluminum alloy systems Al-Zn-Mg-Cu to prevent premature failure |
| title_full | Управління властивостями високоміцних алюмінієвих сплавів системи Al-Zn-Mg-Cu для запобігання передчасному руйнуванню |
| title_fullStr | Управління властивостями високоміцних алюмінієвих сплавів системи Al-Zn-Mg-Cu для запобігання передчасному руйнуванню |
| title_full_unstemmed | Управління властивостями високоміцних алюмінієвих сплавів системи Al-Zn-Mg-Cu для запобігання передчасному руйнуванню |
| title_short | Управління властивостями високоміцних алюмінієвих сплавів системи Al-Zn-Mg-Cu для запобігання передчасному руйнуванню |
| title_sort | управління властивостями високоміцних алюмінієвих сплавів системи al-zn-mg-cu для запобігання передчасному руйнуванню |
| topic | алюмінієві сплави міцність пластичність корозійна стійкість планер літака |
| topic_facet | алюмінієві сплави міцність пластичність корозійна стійкість планер літака aluminium alloys strength plasticity corrosion resistance airplane glider |
| url | https://momjournal.org.ua/index.php/mom/article/view/2019-2-6 |
| work_keys_str_mv | AT abolikhinaov controlthepropertiesofhighstrengthaluminumalloysystemsalznmgcutopreventprematurefailure AT chernegasm controlthepropertiesofhighstrengthaluminumalloysystemsalznmgcutopreventprematurefailure AT abolikhinaov upravlínnâvlastivostâmivisokomícnihalûmíníêvihsplavívsistemialznmgcudlâzapobígannâperedčasnomurujnuvannû AT chernegasm upravlínnâvlastivostâmivisokomícnihalûmíníêvihsplavívsistemialznmgcudlâzapobígannâperedčasnomurujnuvannû |