Вплив температури на структуру та механічні властивості композиційного квазікристалічного сплаву Al94Fe3Cr3, консолідованого під тиском
Consolidation of powdered Al-based alloy with nominal composition of Al94Fe3Cr3, which was fabricated by water-atomisation technique using high-pressure water, was performed under quasi-hydrostatic pressure (2.5 and 4 GPa) at the room temperature. The annealing of the composite quasicrystalline Al94...
Збережено в:
| Дата: | 2018 |
|---|---|
| Автори: | , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico- Technological Institute of Metals and Alloys of the NAS of Ukraine
2018
|
| Онлайн доступ: | https://momjournal.org.ua/index.php/mom/article/view/2018-2-3 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal Science and Treatment of Metals |
Репозитарії
Metal Science and Treatment of Metals| _version_ | 1856543767265280000 |
|---|---|
| author | Yurkova, A.І. Kravchenko, О.І. |
| author_facet | Yurkova, A.І. Kravchenko, О.І. |
| author_sort | Yurkova, A.І. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-09-04T10:35:07Z |
| description | Consolidation of powdered Al-based alloy with nominal composition of Al94Fe3Cr3, which was fabricated by water-atomisation technique using high-pressure water, was performed under quasi-hydrostatic pressure (2.5 and 4 GPa) at the room temperature. The annealing of the composite quasicrystalline Al94Fe3Cr3 alloy was carried out in the temperature range 350-600 °С. The influence of temperature on the structure and mechanical characteristics (microhardness number, HV, and yield stress, s0.2, plasticity characteristic δH) of as-consolidated Al94Fe3Cr3 alloy were characterized by XRD, SEM analysis and the test method procedures of indentation technique. It is shown that the strength characteristics of the alloy retain high values up to a temperature of 400 °C, at which quasicrystalline particles of i-phase dissolve in α-Al matrix with the simultaneous formation of the crystalline metastable Al6Fe intermetallic. A significant decrease in the strength of the alloy occurs when the annealing temperature increases to 600 °C, which is accompanied by the conversion of the metastable intermetallic Al6Fe phase to stable crystalline intermetallic θ-phases: Al13Cr2 and Al13Fe4. |
| first_indexed | 2025-09-24T17:41:11Z |
| format | Article |
| id | oai:ojs2.localhost:article-259 |
| institution | Metal Science and Treatment of Metals |
| language | Ukrainian |
| last_indexed | 2025-12-17T12:07:44Z |
| publishDate | 2018 |
| publisher | Physico- Technological Institute of Metals and Alloys of the NAS of Ukraine |
| record_format | ojs |
| spelling | oai:ojs2.localhost:article-2592023-09-04T10:35:07Z Effect of temperature on structure and mechanical properties of composite quasicrystalline Al94Fe3Cr3 alloy consolidated under high pressure Вплив температури на структуру та механічні властивості композиційного квазікристалічного сплаву Al94Fe3Cr3, консолідованого під тиском Yurkova, A.І. Kravchenko, О.І. Consolidation of powdered Al-based alloy with nominal composition of Al94Fe3Cr3, which was fabricated by water-atomisation technique using high-pressure water, was performed under quasi-hydrostatic pressure (2.5 and 4 GPa) at the room temperature. The annealing of the composite quasicrystalline Al94Fe3Cr3 alloy was carried out in the temperature range 350-600 °С. The influence of temperature on the structure and mechanical characteristics (microhardness number, HV, and yield stress, s0.2, plasticity characteristic δH) of as-consolidated Al94Fe3Cr3 alloy were characterized by XRD, SEM analysis and the test method procedures of indentation technique. It is shown that the strength characteristics of the alloy retain high values up to a temperature of 400 °C, at which quasicrystalline particles of i-phase dissolve in α-Al matrix with the simultaneous formation of the crystalline metastable Al6Fe intermetallic. A significant decrease in the strength of the alloy occurs when the annealing temperature increases to 600 °C, which is accompanied by the conversion of the metastable intermetallic Al6Fe phase to stable crystalline intermetallic θ-phases: Al13Cr2 and Al13Fe4. Методами фазового рентгеноструктурного аналізу, скануючої електронної мікроскопії та мікромеханічних випробувань вивчено вплив температури на еволюцію структури та формування механічних властивостей композиційного сплаву Al94Fe3Cr3 з нанорозмірними частинками метастабільної ікосаедричної квазікристалічної фази (i-фази), консолідованого в умовах квазігідростатичного стиску (2,5 і 4 ГПа) при кімнатній температурі. Показано, що характеристики міцності сплаву зберігають високі значення до температури 400 °C, вище за яку починається розчинення квазікристалічних частинок i-фази з одночасним формуванням кристалічного метастабільного інтерметаліду Al6Fe. Суттєве зниження міцності сплаву відбувається при підвищенні температури відпалу до 600 °C, яке супроводжується перетворенням метастабільного інтерметаліду Al6Fe в стабільні кристалічні θ-фази: Al13Cr2 та Al13Fe4. Physico- Technological Institute of Metals and Alloys of the NAS of Ukraine 2018-06-30 Article Article application/pdf https://momjournal.org.ua/index.php/mom/article/view/2018-2-3 10.15407/mom2018.02.018 Scientific Technical Journal; Vol. 24 No. 2 (2018): The Scientific Technical journal Metal Science and Treatment of Metals; 18-28 Науково-технічний журнал; Том 24 № 2 (2018): Науково-технічний журнал Металознавство та обробка металів; 18-28 2664-2441 2073-9583 10.15407/mom2018.02 uk https://momjournal.org.ua/index.php/mom/article/view/2018-2-3/2018-2-3 Copyright (c) 2023 Scientific Technical Journal https://creativecommons.org/licenses/by-nc-nd/4.0 |
| spellingShingle | Yurkova, A.І. Kravchenko, О.І. Вплив температури на структуру та механічні властивості композиційного квазікристалічного сплаву Al94Fe3Cr3, консолідованого під тиском |
| title | Вплив температури на структуру та механічні властивості композиційного квазікристалічного сплаву Al94Fe3Cr3, консолідованого під тиском |
| title_alt | Effect of temperature on structure and mechanical properties of composite quasicrystalline Al94Fe3Cr3 alloy consolidated under high pressure |
| title_full | Вплив температури на структуру та механічні властивості композиційного квазікристалічного сплаву Al94Fe3Cr3, консолідованого під тиском |
| title_fullStr | Вплив температури на структуру та механічні властивості композиційного квазікристалічного сплаву Al94Fe3Cr3, консолідованого під тиском |
| title_full_unstemmed | Вплив температури на структуру та механічні властивості композиційного квазікристалічного сплаву Al94Fe3Cr3, консолідованого під тиском |
| title_short | Вплив температури на структуру та механічні властивості композиційного квазікристалічного сплаву Al94Fe3Cr3, консолідованого під тиском |
| title_sort | вплив температури на структуру та механічні властивості композиційного квазікристалічного сплаву al94fe3cr3, консолідованого під тиском |
| url | https://momjournal.org.ua/index.php/mom/article/view/2018-2-3 |
| work_keys_str_mv | AT yurkovaaí effectoftemperatureonstructureandmechanicalpropertiesofcompositequasicrystallineal94fe3cr3alloyconsolidatedunderhighpressure AT kravchenkooí effectoftemperatureonstructureandmechanicalpropertiesofcompositequasicrystallineal94fe3cr3alloyconsolidatedunderhighpressure AT yurkovaaí vplivtemperaturinastrukturutamehaníčnívlastivostíkompozicíjnogokvazíkristalíčnogosplavual94fe3cr3konsolídovanogopídtiskom AT kravchenkooí vplivtemperaturinastrukturutamehaníčnívlastivostíkompozicíjnogokvazíkristalíčnogosplavual94fe3cr3konsolídovanogopídtiskom |