Вплив послідовності нанесення титану та хрому при електроіскровому легуванні на структуру та властивості приповерхневих шарів сталі Ст.3
It was found that titanium and chromium deposition sequence in the process of Electric-spark alloying (ESA) affects the structure, phase composition, microhardness and wear resistance of the near-surface steel zone of steel Art.3. When processed in the Ti-Cr sequence, alloyed layers is 10 –15 micron...
Збережено в:
| Дата: | 2018 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico- Technological Institute of Metals and Alloys of the NAS of Ukraine
2018
|
| Онлайн доступ: | https://momjournal.org.ua/index.php/mom/article/view/2018-1-4 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal Science and Treatment of Metals |
Репозитарії
Metal Science and Treatment of Metals| Резюме: | It was found that titanium and chromium deposition sequence in the process of Electric-spark alloying (ESA) affects the structure, phase composition, microhardness and wear resistance of the near-surface steel zone of steel Art.3. When processed in the Ti-Cr sequence, alloyed layers is 10 –15 microns thickness with a microhardness of 10 GPa, wear resistance of 19 times greater than the unprocessed basis, are formed, while when processed in the Cr-Ti sequence, the thickness of the layer is 15 – 20 microns , microhardness – 6.6 GPa, and wear resistance increases 25 times. |
|---|