Екологічні аспекти переробки ливарного алюмінієвого шлаку
Data on the influence of the aluminum slag processing process on the state of the atmospheric environment are presented. Calculations of the dispersion of pollutants (PO) in the surface layer of atmospheric air were carried out, which showed the absence of exceeding the maximum permissible concentra...
Збережено в:
| Дата: | 2023 |
|---|---|
| Автор: | |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico- Technological Institute of Metals and Alloys of the NAS of Ukraine
2023
|
| Теми: | |
| Онлайн доступ: | https://momjournal.org.ua/index.php/mom/article/view/2023-3-6 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal Science and Treatment of Metals |
Репозитарії
Metal Science and Treatment of Metals| _version_ | 1856543776286179328 |
|---|---|
| author | Dovbenko , V.V. |
| author_facet | Dovbenko , V.V. |
| author_sort | Dovbenko , V.V. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-10-23T09:11:45Z |
| description | Data on the influence of the aluminum slag processing process on the state of the atmospheric environment are presented. Calculations of the dispersion of pollutants (PO) in the surface layer of atmospheric air were carried out, which showed the absence of exceeding the maximum permissible concentrations (MPC) for carbon monoxide, nitrogen dioxin, sulfur dioxide, hydrogen chloride and dust. Analysis of emissions was carried out for extreme conditions of equipment operation. It was established that under such technological conditions, the maximum concentration of pollutants is: NO2 ≤ values of 0.2 MPC, and the rest of the pollutants do not exceed - 0.05 MPC. To identify the actual concentrations of hazardous substances at the border of the sanitary protection zone (SZZ), laboratory tests were performed at a distance of 300 m from the emission source. It was established that emissions of pollutants into the atmosphere from the industrial site on the territory of the enterprise and on the border of the calculated sanitary protection zone are less than the MPC of the atmospheric air of populated areas and will not have a significant harmful effect on the environment, provided that the sanitary and technological requirements for operation are met. The level of the content of harmful impurities in the air does not exceed the hygienic standards outside the sanitary protection zone, which are established for the atmospheric air of populated areas. |
| first_indexed | 2025-09-24T17:41:13Z |
| format | Article |
| id | oai:ojs2.localhost:article-278 |
| institution | Metal Science and Treatment of Metals |
| language | Ukrainian |
| last_indexed | 2025-12-17T12:07:48Z |
| publishDate | 2023 |
| publisher | Physico- Technological Institute of Metals and Alloys of the NAS of Ukraine |
| record_format | ojs |
| spelling | oai:ojs2.localhost:article-2782023-10-23T09:11:45Z Environmental aspects of foundry aluminum slag processing Екологічні аспекти переробки ливарного алюмінієвого шлаку Dovbenko , V.V. екологія забруднюючі речовини гранично допустима концентрація алюмінієвий шлак ecology pollutants maximum permissible concentration aluminum slag Data on the influence of the aluminum slag processing process on the state of the atmospheric environment are presented. Calculations of the dispersion of pollutants (PO) in the surface layer of atmospheric air were carried out, which showed the absence of exceeding the maximum permissible concentrations (MPC) for carbon monoxide, nitrogen dioxin, sulfur dioxide, hydrogen chloride and dust. Analysis of emissions was carried out for extreme conditions of equipment operation. It was established that under such technological conditions, the maximum concentration of pollutants is: NO2 ≤ values of 0.2 MPC, and the rest of the pollutants do not exceed - 0.05 MPC. To identify the actual concentrations of hazardous substances at the border of the sanitary protection zone (SZZ), laboratory tests were performed at a distance of 300 m from the emission source. It was established that emissions of pollutants into the atmosphere from the industrial site on the territory of the enterprise and on the border of the calculated sanitary protection zone are less than the MPC of the atmospheric air of populated areas and will not have a significant harmful effect on the environment, provided that the sanitary and technological requirements for operation are met. The level of the content of harmful impurities in the air does not exceed the hygienic standards outside the sanitary protection zone, which are established for the atmospheric air of populated areas. Представлено дані по впливу процесу переробки алюмінієвого шлаку на стан атмосферного середовища. Проведено розрахунки розсіювання забруднюючих речовин (ЗР) в приземному шарі атмосферного повітря, який показав відсутність перевищення гранично допустимих концентрацій (ГДК) по оксиду вуглецю, діоксину азоту, двооксиду сірки, хлориду водню та пилу. Аналіз викидів проводився при екстремальних умовах експлуатації обладнання. Встановлено, що при таких технологічних умовах максимальна концентрація забруднюючих речовин становить: NO2 ≤ значень 0.2 ГДК, а решта ЗР - не перевищує - 0,05 ГДК. Для виявлення фактичних концентрацій ЗР на межі санітарно-захисної зони (СЗЗ) були виконані лабораторні дослідження на відстані 300 м від джерела викиду. Встановлено, що викиди забруднюючих речовин в атмосферу від промислової ділянки на території підприємства та на межі розрахункової санітарно-захисної зони менше ніж ГДК атмосферного повітря населених місць та не матиме значного шкідливого впливу на оточуюче середовище, за умови виконання санітарних та технологічних вимог до експлуатації. Рівень вмісту шкідливих домішок у повітрі не перевищує гігієнічних нормативів поза межами санітарно-захисної зони, які встановлено для атмосферного повітря населених місць. Physico- Technological Institute of Metals and Alloys of the NAS of Ukraine 2023-09-30 Article Article application/pdf https://momjournal.org.ua/index.php/mom/article/view/2023-3-6 10.15407/mom2023.03.050 Scientific Technical Journal; Vol. 29 No. 3 (2023): The Scientific Technical journal Metal Science and Treatment of Metals; 50-55 Науково-технічний журнал; Том 29 № 3 (2023): Науково-технічний журнал Металознавство та обробка металів; 50-55 2664-2441 2073-9583 10.15407/mom2023.03 uk https://momjournal.org.ua/index.php/mom/article/view/2023-3-6/2023-3-6 Copyright (c) 2023 Scientific Technical Journal https://creativecommons.org/licenses/by-nc-nd/4.0 |
| spellingShingle | екологія забруднюючі речовини гранично допустима концентрація алюмінієвий шлак Dovbenko , V.V. Екологічні аспекти переробки ливарного алюмінієвого шлаку |
| title | Екологічні аспекти переробки ливарного алюмінієвого шлаку |
| title_alt | Environmental aspects of foundry aluminum slag processing |
| title_full | Екологічні аспекти переробки ливарного алюмінієвого шлаку |
| title_fullStr | Екологічні аспекти переробки ливарного алюмінієвого шлаку |
| title_full_unstemmed | Екологічні аспекти переробки ливарного алюмінієвого шлаку |
| title_short | Екологічні аспекти переробки ливарного алюмінієвого шлаку |
| title_sort | екологічні аспекти переробки ливарного алюмінієвого шлаку |
| topic | екологія забруднюючі речовини гранично допустима концентрація алюмінієвий шлак |
| topic_facet | екологія забруднюючі речовини гранично допустима концентрація алюмінієвий шлак ecology pollutants maximum permissible concentration aluminum slag |
| url | https://momjournal.org.ua/index.php/mom/article/view/2023-3-6 |
| work_keys_str_mv | AT dovbenkovv environmentalaspectsoffoundryaluminumslagprocessing AT dovbenkovv ekologíčníaspektipererobkilivarnogoalûmíníêvogošlaku |