Аналіз процесу ущільнення порошків вольфраму плакованих міддю
The paper analyzes the pressing process of a composite powder of the tungsten-copper system using the basic mathematical equations describing the deformation processes of a porous body as a function of density and pressing pressure. Several theoretical dependences describing different pressing mecha...
Збережено в:
| Дата: | 2024 |
|---|---|
| Автори: | , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
Physico- Technological Institute of Metals and Alloys of the NAS of Ukraine
2024
|
| Теми: | |
| Онлайн доступ: | https://momjournal.org.ua/index.php/mom/article/view/2024-3-5 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal Science and Treatment of Metals |
Репозитарії
Metal Science and Treatment of Metals| id |
oai:ojs2.localhost:article-317 |
|---|---|
| record_format |
ojs |
| institution |
Metal Science and Treatment of Metals |
| baseUrl_str |
|
| datestamp_date |
2024-12-29T09:42:47Z |
| collection |
OJS |
| language |
Ukrainian |
| topic |
вольфрам мідь плакований порошок хімічне осадження пресування рівняння |
| spellingShingle |
вольфрам мідь плакований порошок хімічне осадження пресування рівняння Polishchuk , K.V. Minitskyi , A.V. Аналіз процесу ущільнення порошків вольфраму плакованих міддю |
| topic_facet |
tungsten copper clad powder chemical deposition pressing equation вольфрам мідь плакований порошок хімічне осадження пресування рівняння |
| format |
Article |
| author |
Polishchuk , K.V. Minitskyi , A.V. |
| author_facet |
Polishchuk , K.V. Minitskyi , A.V. |
| author_sort |
Polishchuk , K.V. |
| title |
Аналіз процесу ущільнення порошків вольфраму плакованих міддю |
| title_short |
Аналіз процесу ущільнення порошків вольфраму плакованих міддю |
| title_full |
Аналіз процесу ущільнення порошків вольфраму плакованих міддю |
| title_fullStr |
Аналіз процесу ущільнення порошків вольфраму плакованих міддю |
| title_full_unstemmed |
Аналіз процесу ущільнення порошків вольфраму плакованих міддю |
| title_sort |
аналіз процесу ущільнення порошків вольфраму плакованих міддю |
| title_alt |
Analysis of the compaction process of copper clad tungsten powders |
| description |
The paper analyzes the pressing process of a composite powder of the tungsten-copper system using the basic mathematical equations describing the deformation processes of a porous body as a function of density and pressing pressure. Several theoretical dependences describing different pressing mechanisms are considered, taking into account modern approaches, namely the discrete-contact model and the continuum model of a continuous medium. The most well-known equations, including those of Balshin M.Y., Zhdanovich G.M., and Shtern M.B., are analyzed. It is established that most of them have limited applicability, remaining valid for individual stages of the pressing process and significantly depend on the mechanical properties of the material that determine the predominance of elastic or plastic deformation. At the same time, most equations are focused on single-component powders, which does not correspond to the practice of powdered parts production processes. To test the theoretical dependencies, copper-clad tungsten powder was obtained by chemical vapor deposition from solution. The technological parameters of the cladding process (composition, solution concentration, and deposition time) that determine the quality of the resulting coatings were determined. The morphology of the particles of clad powders and the structure of tungsten-copper pressings were investigated. It is shown that tungsten powder forms a relatively dense framework with a copper layer, respectively, the structure of composite powder pressings is as close as possible to a continuous continuum and is correctly described by an equation based on the theory of continuity of the medium, It has been established that the compaction character of copper-clad tungsten powder differs from that of single-component tungsten powder, which is due to the fact that plastic deformation mechanisms prevail for tungsten-copper composite powders. |
| publisher |
Physico- Technological Institute of Metals and Alloys of the NAS of Ukraine |
| publishDate |
2024 |
| url |
https://momjournal.org.ua/index.php/mom/article/view/2024-3-5 |
| work_keys_str_mv |
AT polishchukkv analysisofthecompactionprocessofcoppercladtungstenpowders AT minitskyiav analysisofthecompactionprocessofcoppercladtungstenpowders AT polishchukkv analízprocesuuŝílʹnennâporoškívvolʹframuplakovanihmíddû AT minitskyiav analízprocesuuŝílʹnennâporoškívvolʹframuplakovanihmíddû |
| first_indexed |
2025-09-24T17:41:17Z |
| last_indexed |
2025-09-24T17:41:17Z |
| _version_ |
1850424256377126912 |
| spelling |
oai:ojs2.localhost:article-3172024-12-29T09:42:47Z Analysis of the compaction process of copper clad tungsten powders Аналіз процесу ущільнення порошків вольфраму плакованих міддю Polishchuk , K.V. Minitskyi , A.V. tungsten copper clad powder chemical deposition pressing equation вольфрам мідь плакований порошок хімічне осадження пресування рівняння The paper analyzes the pressing process of a composite powder of the tungsten-copper system using the basic mathematical equations describing the deformation processes of a porous body as a function of density and pressing pressure. Several theoretical dependences describing different pressing mechanisms are considered, taking into account modern approaches, namely the discrete-contact model and the continuum model of a continuous medium. The most well-known equations, including those of Balshin M.Y., Zhdanovich G.M., and Shtern M.B., are analyzed. It is established that most of them have limited applicability, remaining valid for individual stages of the pressing process and significantly depend on the mechanical properties of the material that determine the predominance of elastic or plastic deformation. At the same time, most equations are focused on single-component powders, which does not correspond to the practice of powdered parts production processes. To test the theoretical dependencies, copper-clad tungsten powder was obtained by chemical vapor deposition from solution. The technological parameters of the cladding process (composition, solution concentration, and deposition time) that determine the quality of the resulting coatings were determined. The morphology of the particles of clad powders and the structure of tungsten-copper pressings were investigated. It is shown that tungsten powder forms a relatively dense framework with a copper layer, respectively, the structure of composite powder pressings is as close as possible to a continuous continuum and is correctly described by an equation based on the theory of continuity of the medium, It has been established that the compaction character of copper-clad tungsten powder differs from that of single-component tungsten powder, which is due to the fact that plastic deformation mechanisms prevail for tungsten-copper composite powders. В роботі проаналізовано процес ущільнення композиційного порошку системи вольфрам – мідь шляхом застосування математичних рівнянь, що описують процеси деформації пористого тіла, як залежність щільності від тиску пресування. Розглянуто декілька теоретичних залежностей, що описують різні механізми пресування з урахуванням сучасних підходів, а саме дискретно-контактна модель та модель суцільного середовища. Проаналізовано найбільш відомі рівняння, до яких відносяться рівняння Бальшина М.Ю., Ждановича Г.М. та Штерна М.Б. встановлено, що більшість з них мають обмежену застосовність, залишаючись справедливими для окремих етапів процесу пресування та суттєво залежать від механічних властивостей матеріалу, що визначають перевагу пружної або пластичної деформації. При цьому більшість рівнянь орієнтовані на однокомпонентні порошки, що не відповідає практиці процесів отримання порошкових деталей. Для перевірки теоретичних залежностей отримано порошок вольфраму плакований міддю методом хімічного осадження із розчину. Встановлено технологічні параметри процесу плакування (склад, концентрація розчину та час осадження), що визначають якість отриманих покриттів. Досліджено морфологію частинок плакованих порошків та структуру пресовок вольфрам-мідь. Показано, що порошок вольфраму утворює відносно щільний каркас з мідним прошарком, відповідно, структура пресовок із композиційного порошку є наближеною до суцільного середовища і цілком коректно описується рівнянням, яке основано на теорії суцільності середовища, що піддається стисканню. Встановлено, що процес ущільнення порошку вольфраму плакованого міддю відрізняється від деформації однокомпонентного порошку вольфраму, що зумовлено суттєвим впливом механізму пластичної деформації завдяки прошарку міді на частинках порошку вольфраму. Physico- Technological Institute of Metals and Alloys of the NAS of Ukraine 2024-09-26 Article Article application/pdf https://momjournal.org.ua/index.php/mom/article/view/2024-3-5 10.15407/mom2024.03.045 Scientific Technical Journal; Vol. 30 No. 3 (2024): The Scientific Technical journal Metal Science and Treatment of Metals; 45-57 Науково-технічний журнал; Том 30 № 3 (2024): Науково-технічний журнал Металознавство та обробка металів; 45-57 2664-2441 2073-9583 10.15407/mom2024.03 uk https://momjournal.org.ua/index.php/mom/article/view/2024-3-5/2024-3-6 Copyright (c) 2024 Scientific Technical Journal https://creativecommons.org/licenses/by-nc-nd/4.0 |