Три етапи становлення та зростання можливостей ливарного виробництва: Processy litʹâ, 2021, Tom 144, №2, p.37-44
Received 23.03.2021 UDK 621.74.04 The article presents an analysis of the development of foundry processes in view of the structural diversity of cast billets, for the manufacture of which these processes are suitable. At the same time the substantiation of systematization both among long-existing f...
Збережено в:
| Дата: | 2023 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
National Academy of Sciences of Ukraine, Physical-Technological Institute of Metals and Alloys of NAS of Ukraine
2023
|
| Теми: | |
| Онлайн доступ: | https://plit-periodical.org.ua/index.php/plit/article/view/57 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Casting Processes |
Репозитарії
Casting Processes| id |
oai:ojs2.localhost:article-57 |
|---|---|
| record_format |
ojs |
| institution |
Casting Processes |
| baseUrl_str |
|
| datestamp_date |
2023-06-22T08:51:12Z |
| collection |
OJS |
| language |
Ukrainian |
| topic |
ливарне виробництво металоємність конструкція виливка 3D-технології цифровізація технологічна підготовка формовка лиття за моделями що газифікуються газовиділення |
| spellingShingle |
ливарне виробництво металоємність конструкція виливка 3D-технології цифровізація технологічна підготовка формовка лиття за моделями що газифікуються газовиділення Шинський, О. Й. Дорошенко, В. С. Лисий, А. С. Три етапи становлення та зростання можливостей ливарного виробництва: Processy litʹâ, 2021, Tom 144, №2, p.37-44 |
| topic_facet |
ливарне виробництво металоємність конструкція виливка 3D-технології цифровізація технологічна підготовка формовка лиття за моделями що газифікуються газовиділення foundry production metal consumption casting construction 3D technologies digitalization technological preparation molding Lost Foam casting gasified patterns gas evolution |
| format |
Article |
| author |
Шинський, О. Й. Дорошенко, В. С. Лисий, А. С. |
| author_facet |
Шинський, О. Й. Дорошенко, В. С. Лисий, А. С. |
| author_sort |
Шинський, О. Й. |
| title |
Три етапи становлення та зростання можливостей ливарного виробництва: Processy litʹâ, 2021, Tom 144, №2, p.37-44 |
| title_short |
Три етапи становлення та зростання можливостей ливарного виробництва: Processy litʹâ, 2021, Tom 144, №2, p.37-44 |
| title_full |
Три етапи становлення та зростання можливостей ливарного виробництва: Processy litʹâ, 2021, Tom 144, №2, p.37-44 |
| title_fullStr |
Три етапи становлення та зростання можливостей ливарного виробництва: Processy litʹâ, 2021, Tom 144, №2, p.37-44 |
| title_full_unstemmed |
Три етапи становлення та зростання можливостей ливарного виробництва: Processy litʹâ, 2021, Tom 144, №2, p.37-44 |
| title_sort |
три етапи становлення та зростання можливостей ливарного виробництва: processy litʹâ, 2021, tom 144, №2, p.37-44 |
| title_alt |
Three stages of formation and growth of opportunities for foundry production: Processy litʹâ, 2021, Tom 144, №2, p.37-44 |
| description |
Received 23.03.2021
UDK 621.74.04
The article presents an analysis of the development of foundry processes in view of the structural diversity of cast billets, for the manufacture of which these processes are suitable. At the same time the substantiation of systematization both among long-existing foundry processes, and rather recent, introduced in manufacture as sign original technologies is executed. Previously and now, mostly during molding in paired crucibles, they poured and poured what (1) they could form. With the development of casting on one-time pattern, in particular gasified ones, the possibility of casting what (2) they could model was added. With the advent of additive manufacturing - 3D technology, the ability to cast (3) that could print or “grow” was added. And now they can print both a foundry pattern (single or multiple) and mold, as well as castings. Thus, we are talking about three stages of formation and subsequent increase in the possibilities of foundry production. Several examples from open sources of world technical information are given, in particular, about the application and advantages of digital technologies for optimization of cast structures, for technological preparation of production, as well as about the perspective direction of further research. A series of studies is planned for the development of casting methods for gasified printed patterns. Such cavity fs consist of smooth outer shells with internal struts, they should be used for metal casting by some analogy with vacuum film molding by combining the cavity of the patterns with the atmosphere, making channels in the pattern and extending them with tubular protrusions. the first stage. Then the gas emissions, even rapid or peak, from the gasification of the polymer pattern are discharged to the upper surface of the mold, where the gases can be ignited for neutralization similar to the method that we patent. |
| publisher |
National Academy of Sciences of Ukraine, Physical-Technological Institute of Metals and Alloys of NAS of Ukraine |
| publishDate |
2023 |
| url |
https://plit-periodical.org.ua/index.php/plit/article/view/57 |
| work_keys_str_mv |
AT šinsʹkijoj threestagesofformationandgrowthofopportunitiesforfoundryproductionprocessylitʹa2021tom1442p3744 AT dorošenkovs threestagesofformationandgrowthofopportunitiesforfoundryproductionprocessylitʹa2021tom1442p3744 AT lisijas threestagesofformationandgrowthofopportunitiesforfoundryproductionprocessylitʹa2021tom1442p3744 AT šinsʹkijoj trietapistanovlennâtazrostannâmožlivostejlivarnogovirobnictvaprocessylitʹa2021tom1442p3744 AT dorošenkovs trietapistanovlennâtazrostannâmožlivostejlivarnogovirobnictvaprocessylitʹa2021tom1442p3744 AT lisijas trietapistanovlennâtazrostannâmožlivostejlivarnogovirobnictvaprocessylitʹa2021tom1442p3744 |
| first_indexed |
2025-09-24T17:42:40Z |
| last_indexed |
2025-09-24T17:42:40Z |
| _version_ |
1850424282888273920 |
| spelling |
oai:ojs2.localhost:article-572023-06-22T08:51:12Z Three stages of formation and growth of opportunities for foundry production: Processy litʹâ, 2021, Tom 144, №2, p.37-44 Три етапи становлення та зростання можливостей ливарного виробництва: Processy litʹâ, 2021, Tom 144, №2, p.37-44 Шинський, О. Й. Дорошенко, В. С. Лисий, А. С. ливарне виробництво металоємність конструкція виливка 3D-технології цифровізація технологічна підготовка формовка лиття за моделями, що газифікуються газовиділення foundry production metal consumption casting construction 3D technologies digitalization technological preparation molding Lost Foam casting gasified patterns gas evolution Received 23.03.2021 UDK 621.74.04 The article presents an analysis of the development of foundry processes in view of the structural diversity of cast billets, for the manufacture of which these processes are suitable. At the same time the substantiation of systematization both among long-existing foundry processes, and rather recent, introduced in manufacture as sign original technologies is executed. Previously and now, mostly during molding in paired crucibles, they poured and poured what (1) they could form. With the development of casting on one-time pattern, in particular gasified ones, the possibility of casting what (2) they could model was added. With the advent of additive manufacturing - 3D technology, the ability to cast (3) that could print or “grow” was added. And now they can print both a foundry pattern (single or multiple) and mold, as well as castings. Thus, we are talking about three stages of formation and subsequent increase in the possibilities of foundry production. Several examples from open sources of world technical information are given, in particular, about the application and advantages of digital technologies for optimization of cast structures, for technological preparation of production, as well as about the perspective direction of further research. A series of studies is planned for the development of casting methods for gasified printed patterns. Such cavity fs consist of smooth outer shells with internal struts, they should be used for metal casting by some analogy with vacuum film molding by combining the cavity of the patterns with the atmosphere, making channels in the pattern and extending them with tubular protrusions. the first stage. Then the gas emissions, even rapid or peak, from the gasification of the polymer pattern are discharged to the upper surface of the mold, where the gases can be ignited for neutralization similar to the method that we patent. Надійшла 23.03.2021 УДК 621.74.04 В статті відображено аналіз розвитку ливарних процесів з огляду конструкційної різноманітності литих заготовок, для виготовлення яких придатні ці процеси. При цьому виконано обгрунтування систематизації як серед давно існуючих ливарних процесів, так і досить недавніх, впроваджених у виробництво як знакові оригінальні технології. Раніше і зараз здебільшого при формовці в парних опоках лили і ллють те (1), що могли заформувати. З розвитком лиття за разовими моделями, зокрема, що газифікуються, додалась можливість лити те (2), що могли змоделювати. З появою адитивного виробництва - 3D-технологій - додалась можливість лити те (3), що могли надрукувати чи «виростити». Причому зараз надрукувати можуть як ливарну модель (разову чи багаторазову), так і форму, а також виливок. Таким чином, йдеться про три етапи становлення і наступного збільшення можливостей ливарного виробництва. Наведено кілька прикладів із відкритих джерел світової технічної інформації, зокрема, про застосування і переваги цифрових технологій для оптимізації литих конструкцій, для технологічної підготовки виробництва, а також про перспективний напрям подальших досліджень. Заплановано цикл досліджень для розробки методів лиття за друкованими моделями, що газифікуються. Такі порожнинні моделі складаються з гладких зовнішніх оболонок з внутрішніми розпірками, їх застосовувати для лиття металу доцільно за деякою аналогією з вакуумно-плівковою формовкою методом поєднання порожнини моделей з атмосферою, зробивши канали в моделі та продовживши їх трубчастими випорами, що практично неодмінно виконують при формовці за процесами першого етапу. Тоді газовиділення, навіть бурхливі чи пікові, від газифікації полімерної моделі виводяться на верхню поверхню форми, де гази можуть підпалюватись для знешкодження аналогічно способу, що нами патентується. National Academy of Sciences of Ukraine, Physical-Technological Institute of Metals and Alloys of NAS of Ukraine 2023-06-02 Article Article application/pdf https://plit-periodical.org.ua/index.php/plit/article/view/57 10.15407/plit2021.02.037 Casting processes; Casting processes №2 (144) 2021; 37-44 Процеси лиття; Процеси лиття №2 (144) 2021; 37-44 2707-1626 0235-5884 uk https://plit-periodical.org.ua/index.php/plit/article/view/57/56 Авторське право (c) 2021 О. Й. Шинський, В. С. Дорошенко, А. С. Лисий https://creativecommons.org/licenses/by-nc-nd/4.0/ |