Позапічне наводнення виливків з алюмінієвих сплавів: Processy litʹâ, 2020, Tom 141, №3, p.3-7
Received 26.08.2020 UDC 669.715:788 The content content hydrogen in castings of aluminum alloys depends mainly on its content in the melt before casting. However, you should pay attention to some processes that take place outside the furnace space and are not always controlled. Thus, a significa...
Збережено в:
| Дата: | 2020 |
|---|---|
| Автор: | |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
National Academy of Sciences of Ukraine, Physical-Technological Institute of Metals and Alloys of NAS of Ukraine
2020
|
| Теми: | |
| Онлайн доступ: | https://plit-periodical.org.ua/index.php/plit/article/view/76 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Casting Processes |
Репозитарії
Casting Processes| id |
oai:ojs2.localhost:article-76 |
|---|---|
| record_format |
ojs |
| institution |
Casting Processes |
| baseUrl_str |
|
| datestamp_date |
2023-06-22T09:26:14Z |
| collection |
OJS |
| language |
Ukrainian |
| topic |
алюмінієві сплави виливки позапічне наводнення піщана форма локальне обприскування термічна обробка |
| spellingShingle |
алюмінієві сплави виливки позапічне наводнення піщана форма локальне обприскування термічна обробка Котлярський, Ф. М. Позапічне наводнення виливків з алюмінієвих сплавів: Processy litʹâ, 2020, Tom 141, №3, p.3-7 |
| topic_facet |
алюмінієві сплави виливки позапічне наводнення піщана форма локальне обприскування термічна обробка aluminum alloys castings out-of-furnace flooding sand form local spraying heat treatment |
| format |
Article |
| author |
Котлярський, Ф. М. |
| author_facet |
Котлярський, Ф. М. |
| author_sort |
Котлярський, Ф. М. |
| title |
Позапічне наводнення виливків з алюмінієвих сплавів: Processy litʹâ, 2020, Tom 141, №3, p.3-7 |
| title_short |
Позапічне наводнення виливків з алюмінієвих сплавів: Processy litʹâ, 2020, Tom 141, №3, p.3-7 |
| title_full |
Позапічне наводнення виливків з алюмінієвих сплавів: Processy litʹâ, 2020, Tom 141, №3, p.3-7 |
| title_fullStr |
Позапічне наводнення виливків з алюмінієвих сплавів: Processy litʹâ, 2020, Tom 141, №3, p.3-7 |
| title_full_unstemmed |
Позапічне наводнення виливків з алюмінієвих сплавів: Processy litʹâ, 2020, Tom 141, №3, p.3-7 |
| title_sort |
позапічне наводнення виливків з алюмінієвих сплавів: processy litʹâ, 2020, tom 141, №3, p.3-7 |
| title_alt |
Extraordinary Flooding of Aluminum Alloy Castings: Processy litʹâ, 2020, Tom 141, №3, p.3-7 |
| description |
Received 26.08.2020
UDC 669.715:788
The content content hydrogen in castings of aluminum alloys depends mainly on its content in the melt before casting. However, you should pay attention to some processes that take place outside the furnace space and are not always controlled. Thus, a significant increase in the hydrogen content is observed when casting in crude sand molds as a result of the interaction of the melt with the wet molding mixture: every 100 mm of the path traveled by the melt in this form, add approximately 0.3 cm3 / 100 g of hydrogen. The gas saturation of the melt with the molding mixture can be equated to moistened asbestos. The intensity of this process increases sharply with the introduction into the melt of the modifier in the form of sodium salts: with the introduction of 3% of the modifier increase the gas content of the casting from 1.9 to 3.5 cm3 / 100 g. Flooding can also occur during the crystallization of the casting. Moreover, curing in a humid atmosphere reduces the density and mechanical properties more than melting in a humid atmosphere. In some cases, this effect is used to eliminate the lack of shrinkage defects such as cracks and weights by spraying water on the relevant areas of the painted mold. Flooding is also not excluded after complete curing of the casting due to the interaction with atmospheric water vapor, for example, during heat treatment. Out-of-furnace flooding of aluminum alloys potentially participates in future hydrogen refining of the metal during remelting. To increase the density and mechanical properties of the cast metal, it is necessary to organize not only accelerated hardening, but also cooling of the hardening casting, especially near the liquidus.
|
| publisher |
National Academy of Sciences of Ukraine, Physical-Technological Institute of Metals and Alloys of NAS of Ukraine |
| publishDate |
2020 |
| url |
https://plit-periodical.org.ua/index.php/plit/article/view/76 |
| work_keys_str_mv |
AT kotlârsʹkijfm extraordinaryfloodingofaluminumalloycastingsprocessylitʹa2020tom1413p37 AT kotlârsʹkijfm pozapíčnenavodnennâvilivkívzalûmíníêvihsplavívprocessylitʹa2020tom1413p37 |
| first_indexed |
2025-09-24T17:42:42Z |
| last_indexed |
2025-09-24T17:42:42Z |
| _version_ |
1850424285079797760 |
| spelling |
oai:ojs2.localhost:article-762023-06-22T09:26:14Z Extraordinary Flooding of Aluminum Alloy Castings: Processy litʹâ, 2020, Tom 141, №3, p.3-7 Позапічне наводнення виливків з алюмінієвих сплавів: Processy litʹâ, 2020, Tom 141, №3, p.3-7 Котлярський, Ф. М. алюмінієві сплави виливки позапічне наводнення піщана форма локальне обприскування термічна обробка aluminum alloys castings out-of-furnace flooding sand form local spraying heat treatment Received 26.08.2020 UDC 669.715:788 The content content hydrogen in castings of aluminum alloys depends mainly on its content in the melt before casting. However, you should pay attention to some processes that take place outside the furnace space and are not always controlled. Thus, a significant increase in the hydrogen content is observed when casting in crude sand molds as a result of the interaction of the melt with the wet molding mixture: every 100 mm of the path traveled by the melt in this form, add approximately 0.3 cm3 / 100 g of hydrogen. The gas saturation of the melt with the molding mixture can be equated to moistened asbestos. The intensity of this process increases sharply with the introduction into the melt of the modifier in the form of sodium salts: with the introduction of 3% of the modifier increase the gas content of the casting from 1.9 to 3.5 cm3 / 100 g. Flooding can also occur during the crystallization of the casting. Moreover, curing in a humid atmosphere reduces the density and mechanical properties more than melting in a humid atmosphere. In some cases, this effect is used to eliminate the lack of shrinkage defects such as cracks and weights by spraying water on the relevant areas of the painted mold. Flooding is also not excluded after complete curing of the casting due to the interaction with atmospheric water vapor, for example, during heat treatment. Out-of-furnace flooding of aluminum alloys potentially participates in future hydrogen refining of the metal during remelting. To increase the density and mechanical properties of the cast metal, it is necessary to organize not only accelerated hardening, but also cooling of the hardening casting, especially near the liquidus. Надійшла 26.08.2020 УДК 669.715:788 Вміст водню в виливках з алюмінієвих сплавів залежить, в основному, від його вмісту в розплаві перед розливанням. Проте слід звернути увагу на деякі процеси, що проходять зовні пічного простору і не завжди контролюються. Так, значне збільшення вмісту водню відзначають при литті в сирі піщані форми як результат взаємодії розплаву з вологою формувальної суміші: кожні 100 мм шляху, пройденого розплавом в такій формі, добавляють приблизно 0,3 см3/100 г водню. Газонасиченість розплаву формувальною сумішшю може бути прирівнена до зволоженого азбесту. Інтенсивність цього процесу різко посилюється при введенні в розплав модифікатора у вигляді солей натрію: введення 3 % модифікатору збільшують газовміст ви-ливка від 1,9 до 3,5 см3/100 г. Наводнення може мати місце і в процесі кристалізації виливка. Причому, тверднення в вологій атмосфері сильніше знижує щільність і механічні властивості порівняно з плавкою в вологій атмосфері. У рядівипадків цей ефект використовують для усунення браку по усадочним дефектам типу тріщин та утяжин шляхом оббризкування водою відповідних ділянок пофарбованого кокілю. Наводнення не виключається також після повного затвердіння виливка із-за взаємодії з парами води атмосфери, наприклад, при термічній обробці. Позапічне наводнення алюмінієвих сплавів потенційно бере участь в майбутньому водневому рафінуванні металу під час переплаву. Для підвищення щільності та механічних властивостей литого металу слід організовувати не тільки прискорене, але і охолодження виливка, що твердне, особливо поблизу ліквідуса. National Academy of Sciences of Ukraine, Physical-Technological Institute of Metals and Alloys of NAS of Ukraine 2020-09-20 Article Article application/pdf https://plit-periodical.org.ua/index.php/plit/article/view/76 10.15407/plit2020.03.003 Casting processes; Casting processes №3 (141) 2020; 3-7 Процеси лиття; Процеси лиття №3 (141) 2020; 3-7 2707-1626 0235-5884 uk https://plit-periodical.org.ua/index.php/plit/article/view/76/94 Авторське право (c) 2020 Ф. М. Котлярський https://creativecommons.org/licenses/by-nc-nd/4.0/ |