Проведення дослідних плавок з виробництва із свіжих компонентів сучасного ливарного жароміцного нікелевого сплава: Processy litʹâ, 2021, Tom 146, №4, p.3-13
Received 27.10.2021 UDK 621.74.045:669.24:21.981 Modern high-temperature nickel alloys for critical monocrystalline castings of aircraft engineering are distinguished by a very complex alloying system, which causes their high cost and requires a careful approach to optimizing their chemical composit...
Збережено в:
| Дата: | 2021 |
|---|---|
| Автор: | |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
National Academy of Sciences of Ukraine, Physical-Technological Institute of Metals and Alloys of NAS of Ukraine
2021
|
| Теми: | |
| Онлайн доступ: | https://plit-periodical.org.ua/index.php/plit/article/view/77 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Casting Processes |
Репозитарії
Casting Processes| id |
oai:ojs2.localhost:article-77 |
|---|---|
| record_format |
ojs |
| institution |
Casting Processes |
| baseUrl_str |
|
| datestamp_date |
2023-06-15T08:57:35Z |
| collection |
OJS |
| language |
Ukrainian |
| topic |
ливарний жароміцний нікелевий сплав реній рутеній свіжі компоненти монокристалічні виливки хімічний склад вакуумно-індукційний переплав електронно-променевий переплав |
| spellingShingle |
ливарний жароміцний нікелевий сплав реній рутеній свіжі компоненти монокристалічні виливки хімічний склад вакуумно-індукційний переплав електронно-променевий переплав Наумик, В. В. Проведення дослідних плавок з виробництва із свіжих компонентів сучасного ливарного жароміцного нікелевого сплава: Processy litʹâ, 2021, Tom 146, №4, p.3-13 |
| topic_facet |
ливарний жароміцний нікелевий сплав реній рутеній свіжі компоненти монокристалічні виливки хімічний склад вакуумно-індукційний переплав електронно-променевий переплав cast heat-resistant nickel alloy rhenium ruthenium fresh components single crystal castings chemical composition vacuum induction remelting electron beam remelting |
| format |
Article |
| author |
Наумик, В. В. |
| author_facet |
Наумик, В. В. |
| author_sort |
Наумик, В. В. |
| title |
Проведення дослідних плавок з виробництва із свіжих компонентів сучасного ливарного жароміцного нікелевого сплава: Processy litʹâ, 2021, Tom 146, №4, p.3-13 |
| title_short |
Проведення дослідних плавок з виробництва із свіжих компонентів сучасного ливарного жароміцного нікелевого сплава: Processy litʹâ, 2021, Tom 146, №4, p.3-13 |
| title_full |
Проведення дослідних плавок з виробництва із свіжих компонентів сучасного ливарного жароміцного нікелевого сплава: Processy litʹâ, 2021, Tom 146, №4, p.3-13 |
| title_fullStr |
Проведення дослідних плавок з виробництва із свіжих компонентів сучасного ливарного жароміцного нікелевого сплава: Processy litʹâ, 2021, Tom 146, №4, p.3-13 |
| title_full_unstemmed |
Проведення дослідних плавок з виробництва із свіжих компонентів сучасного ливарного жароміцного нікелевого сплава: Processy litʹâ, 2021, Tom 146, №4, p.3-13 |
| title_sort |
проведення дослідних плавок з виробництва із свіжих компонентів сучасного ливарного жароміцного нікелевого сплава: processy litʹâ, 2021, tom 146, №4, p.3-13 |
| title_alt |
Research melting on production from fresh components of modern foundry heat-resistant nickel alloy: Processy litʹâ, 2021, Tom 146, №4, p.3-13 |
| description |
Received 27.10.2021
UDK 621.74.045:669.24:21.981
Modern high-temperature nickel alloys for critical monocrystalline castings of aircraft engineering are distinguished by a very complex alloying system, which causes their high cost and requires a careful approach to optimizing their chemical composition to ensure structural and phase stability, as well as a special approach to the smelting process, especially in the case of production from clean fresh components of the charge. The main technological process for the production and melting of such alloys today is vacuum induction smelting.As a result of the analysis of the physical properties of the grade composition elements of modern casting heat-resistant nickel alloys in vacuum at various temperatures, it was established by analytical calculations that Al, Cr, Co and Ni are subject to loss in the process of vacuum melting. Determined the amount of losses for the evaporation of these elements in the conditions of vacuum induction and electron beam melting. Based on the data obtained, the calculation of the charge was performed for conducting experimental vacuuminduction melting of modern casting heat-resistant nickel alloys using pure metal components. We studied the evaporation of a film of oxides on the surface of metallic charge materials when heated in a vacuum. It was found that a 5 minute exposure leads to an almost complete cleaning of the sample surface from the oxide film. Recommendations have been developed for conducting experimental heats of modern casting heat-resistant nickel alloys for monocrystalline castings doped with rhenium and ruthenium. We analyzed the processes occurring in vacuum during electron beam melting, including the features of the formation of a cast billet, refining of the melt and evaporation of metal components of heat-resistant nickel alloys. To obtain modern casting of heat-resistant nickel alloys for single-crystal castings doped with rhenium and ruthenium of improved quality, it can be recommended to re-melt by the method of electron beam melting. The calculation of the charge for the experimental vacuum-induction melting with subsequent electron-beam remelting of a modern casting heat-resistant nickel alloy using pure metal components has been carried out. |
| publisher |
National Academy of Sciences of Ukraine, Physical-Technological Institute of Metals and Alloys of NAS of Ukraine |
| publishDate |
2021 |
| url |
https://plit-periodical.org.ua/index.php/plit/article/view/77 |
| work_keys_str_mv |
AT naumikvv researchmeltingonproductionfromfreshcomponentsofmodernfoundryheatresistantnickelalloyprocessylitʹa2021tom1464p313 AT naumikvv provedennâdoslídnihplavokzvirobnictvaízsvížihkomponentívsučasnogolivarnogožaromícnogoníkelevogosplavaprocessylitʹa2021tom1464p313 |
| first_indexed |
2025-09-24T17:40:52Z |
| last_indexed |
2025-09-24T17:40:52Z |
| _version_ |
1850424285187801088 |
| spelling |
oai:ojs2.localhost:article-772023-06-15T08:57:35Z Research melting on production from fresh components of modern foundry heat-resistant nickel alloy: Processy litʹâ, 2021, Tom 146, №4, p.3-13 Проведення дослідних плавок з виробництва із свіжих компонентів сучасного ливарного жароміцного нікелевого сплава: Processy litʹâ, 2021, Tom 146, №4, p.3-13 Наумик, В. В. ливарний жароміцний нікелевий сплав реній рутеній свіжі компоненти монокристалічні виливки хімічний склад вакуумно-індукційний переплав електронно-променевий переплав cast heat-resistant nickel alloy rhenium ruthenium fresh components single crystal castings chemical composition vacuum induction remelting electron beam remelting Received 27.10.2021 UDK 621.74.045:669.24:21.981 Modern high-temperature nickel alloys for critical monocrystalline castings of aircraft engineering are distinguished by a very complex alloying system, which causes their high cost and requires a careful approach to optimizing their chemical composition to ensure structural and phase stability, as well as a special approach to the smelting process, especially in the case of production from clean fresh components of the charge. The main technological process for the production and melting of such alloys today is vacuum induction smelting.As a result of the analysis of the physical properties of the grade composition elements of modern casting heat-resistant nickel alloys in vacuum at various temperatures, it was established by analytical calculations that Al, Cr, Co and Ni are subject to loss in the process of vacuum melting. Determined the amount of losses for the evaporation of these elements in the conditions of vacuum induction and electron beam melting. Based on the data obtained, the calculation of the charge was performed for conducting experimental vacuuminduction melting of modern casting heat-resistant nickel alloys using pure metal components. We studied the evaporation of a film of oxides on the surface of metallic charge materials when heated in a vacuum. It was found that a 5 minute exposure leads to an almost complete cleaning of the sample surface from the oxide film. Recommendations have been developed for conducting experimental heats of modern casting heat-resistant nickel alloys for monocrystalline castings doped with rhenium and ruthenium. We analyzed the processes occurring in vacuum during electron beam melting, including the features of the formation of a cast billet, refining of the melt and evaporation of metal components of heat-resistant nickel alloys. To obtain modern casting of heat-resistant nickel alloys for single-crystal castings doped with rhenium and ruthenium of improved quality, it can be recommended to re-melt by the method of electron beam melting. The calculation of the charge for the experimental vacuum-induction melting with subsequent electron-beam remelting of a modern casting heat-resistant nickel alloy using pure metal components has been carried out. Надійшла 27.10.2021 УДК 621.74.045:669.24:21.981 Сучасні жароміцні нікелеві сплави для відповідальних монокристалічних виливків авіаційного машинобудування відрізняються дуже складною системою легування, що обумовлює їх високу вартість і вимагає ретельного підходу до оптимізації їх хімічного складу для забезпечення структурної та фазової стабільності, а також особливого підходу до процесу виплавки з чистих свіжих компонентів шихти .Основним технологічним процесом виробництва та виплавки таких сплавів на сьогодні є вакуумно-індукційна плавка. В результаті аналізу фізичних властивостей елементів марочного складу сучасних ливарних жароміцних нікелевих сплавів у вакуумі при різних температурах, проведеними аналітичними розрахунками встановили, що, алюміній, хром, кобальт, нікель є схильними до вигару в процесі вакуумної плавки. Визначили величину втрат на випаровування цих елементів в умовах вакуумних індукційних та електронно-променевих плавок. На підставі отриманих даних виконали розрахунок шихти для проведення дослідних вакуумно-індукційних плавок з виготовлення сучасних ливарних жароміцних нікелевих сплавів з використанням чистих металевих компонентів. Провели дослідження випаровування плівки оксидів з поверхні металевих шихтових матеріалів при нагріванні у вакуумі. Встановили, що 5-хвилинна витримка призводить до практично повного очищення поверхні зразка від оксидної плівки. Розроблено рекомендації до проведення дослідних плавок сучасних ливарних жароміцних нікелевих сплавів для монокристалічних виливків, легованих ренієм та рутенієм. Провели аналіз процесів, що відбуваються у вакуумі при елетроннопроменевій плавці, у тому числі особливостей формування литої заготовки, рафінування розплаву та випаровування металевих компонентів жароміцних нікелевих сплавів. Для отримання сучасних ливарних жароміцних нікелевих сплавів для монокристалічних виливків, легованих ренієм та рутенієм, підвищеної якості може бути рекомендовано проведення повторного переплаву методом електронно-променевої плавки. Виконано розрахунок шихти для проведення дослідної вакуумно-індукційної плавки з подальшим електронно-променевим переплавом сучасного ливарного жароміцного нікелевого сплаву з використанням в шихті чистих металевих компонентів. National Academy of Sciences of Ukraine, Physical-Technological Institute of Metals and Alloys of NAS of Ukraine 2021-12-07 Article Article application/pdf https://plit-periodical.org.ua/index.php/plit/article/view/77 10.15407/plit2021.04.003 Casting processes; Casting processes №4 (146) 2021; 3-13 Процеси лиття; Процеси лиття №4 (146) 2021; 3-13 2707-1626 0235-5884 uk https://plit-periodical.org.ua/index.php/plit/article/view/77/79 Авторське право (c) 2021 В. В. Наумик https://creativecommons.org/licenses/by-nc-nd/4.0 |