Прогнозування умов формування тонкої смуги з високоміцних алюмінієвих сплавів залежно від швидкісних режимів валкового розливання і технологічних параметрів: Processy litʹâ, 2020, Tom 142, №4, p.34-41
Received 15.10.2020 UDK 669.185:66-932 The roller pouring is one of advanced methods of thin metal sheet manufacturing and it is widely used in engineering and other branches of industry. The analysis of influence of speed rates and technological parameters of unit for roller pouring in water-cooled...
Збережено в:
| Дата: | 2020 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
National Academy of Sciences of Ukraine, Physical-Technological Institute of Metals and Alloys of NAS of Ukraine
2020
|
| Теми: | |
| Онлайн доступ: | https://plit-periodical.org.ua/index.php/plit/article/view/88 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Casting Processes |
Репозитарії
Casting Processes| id |
oai:ojs2.localhost:article-88 |
|---|---|
| record_format |
ojs |
| spelling |
oai:ojs2.localhost:article-882023-06-22T09:13:51Z Prediction of the Conditions for the Formation of a Thin Strip of High-strength Aluminum Alloys, Depending on the Speed of Casting Rolls and Technological Parameters: Processy litʹâ, 2020, Tom 142, №4, p.34-41 Прогнозування умов формування тонкої смуги з високоміцних алюмінієвих сплавів залежно від швидкісних режимів валкового розливання і технологічних параметрів: Processy litʹâ, 2020, Tom 142, №4, p.34-41 Тарасевич, М. І. Корнієць, І. В. Ноговіцин, О. В. Токарєва, О. О. валкове розливання кристалізатор тонка стрічка тепловідвід математичне моделювання параметри тверднення twin-roll casting crystallizer thin strip heat remover mathematical modeling solidification parameters Received 15.10.2020 UDK 669.185:66-932 The roller pouring is one of advanced methods of thin metal sheet manufacturing and it is widely used in engineering and other branches of industry. The analysis of influence of speed rates and technological parameters of unit for roller pouring in water-cooled crystallizer (meniscus angle, roller radius, melt overheat temperature) on the condition of metal bar forming from high-strength aluminum alloy with different thickness (2, 3 and 4 mm) was made using methods of mathematical and computing modeling. The series of executed computing experiments allowed to build the analytic dependencies for determination of optimal melt pouring speed under given technological parameters that arranged the solidification of the strips with different thickness on the level of rollers output. For high-strength aluminum alloys there were detected the pouring speeds ranges that determined different conditions of strip forming in inter-roller space and on the level of roller crystallizer output.The obtained results can be used for technology refinement and for choosing balance between technological parameters during roller equipment creation and advancing. Надійшла 15.10.2020 УДК 669.185:66-932 Валкове розливання є одним з прогресивних способів отримання тонкого листа, що знаходить широке застосування в машинобудуванні та інших галузях промисловості. Методами математичного та комп’ютерного моделювання проведено аналіз впливу швидкісних режимів і технологічних параметрів установки валкового розливання в водоохолоджувальному кристалізаторі (кут меніску, радіус валка, температура перегріву розплаву) на умови формування тонкої смуги з високоміцних алюмінієвих сплавів різної товщини (2, 3 і 4 мм). Серії обчислювальних експериментів дозволили побудувати аналітичні залежності для визначення оптимальної швидкості розливання розплаву при заданих параметрах, що забезпечують твердіння смуги різної товщини на рівні виходу з валків. Для високоміцних алюмінієвих сплавів встановлено діапазони швидкостей розливання, які визначають різні умови формування смуги - в міжвалковому просторі та на рівні виходу з валкового кристалізатора. Отримані результати можуть бути використані для відпрацювання технології і вибору раціонального співвідношення технологічних параметрів при створенні та удосконаленні валкового обладнання. National Academy of Sciences of Ukraine, Physical-Technological Institute of Metals and Alloys of NAS of Ukraine 2020-12-01 Article Article application/pdf https://plit-periodical.org.ua/index.php/plit/article/view/88 10.15407/plit2020.04.034 Casting processes; Casting processes №4 (142) 2020; 34-41 Процеси лиття; Процеси лиття №4 (142) 2020; 34-41 2707-1626 0235-5884 uk https://plit-periodical.org.ua/index.php/plit/article/view/88/90 Авторське право (c) 2020 М. І. Тарасевич, І. В. Корнієць, О. В. Ноговіцин, О. О. Токарєва https://creativecommons.org/licenses/by-nc-nd/4.0/ |
| institution |
Casting Processes |
| baseUrl_str |
|
| datestamp_date |
2023-06-22T09:13:51Z |
| collection |
OJS |
| language |
Ukrainian |
| topic |
валкове розливання кристалізатор тонка стрічка тепловідвід математичне моделювання параметри тверднення |
| spellingShingle |
валкове розливання кристалізатор тонка стрічка тепловідвід математичне моделювання параметри тверднення Тарасевич, М. І. Корнієць, І. В. Ноговіцин, О. В. Токарєва, О. О. Прогнозування умов формування тонкої смуги з високоміцних алюмінієвих сплавів залежно від швидкісних режимів валкового розливання і технологічних параметрів: Processy litʹâ, 2020, Tom 142, №4, p.34-41 |
| topic_facet |
валкове розливання кристалізатор тонка стрічка тепловідвід математичне моделювання параметри тверднення twin-roll casting crystallizer thin strip heat remover mathematical modeling solidification parameters |
| format |
Article |
| author |
Тарасевич, М. І. Корнієць, І. В. Ноговіцин, О. В. Токарєва, О. О. |
| author_facet |
Тарасевич, М. І. Корнієць, І. В. Ноговіцин, О. В. Токарєва, О. О. |
| author_sort |
Тарасевич, М. І. |
| title |
Прогнозування умов формування тонкої смуги з високоміцних алюмінієвих сплавів залежно від швидкісних режимів валкового розливання і технологічних параметрів: Processy litʹâ, 2020, Tom 142, №4, p.34-41 |
| title_short |
Прогнозування умов формування тонкої смуги з високоміцних алюмінієвих сплавів залежно від швидкісних режимів валкового розливання і технологічних параметрів: Processy litʹâ, 2020, Tom 142, №4, p.34-41 |
| title_full |
Прогнозування умов формування тонкої смуги з високоміцних алюмінієвих сплавів залежно від швидкісних режимів валкового розливання і технологічних параметрів: Processy litʹâ, 2020, Tom 142, №4, p.34-41 |
| title_fullStr |
Прогнозування умов формування тонкої смуги з високоміцних алюмінієвих сплавів залежно від швидкісних режимів валкового розливання і технологічних параметрів: Processy litʹâ, 2020, Tom 142, №4, p.34-41 |
| title_full_unstemmed |
Прогнозування умов формування тонкої смуги з високоміцних алюмінієвих сплавів залежно від швидкісних режимів валкового розливання і технологічних параметрів: Processy litʹâ, 2020, Tom 142, №4, p.34-41 |
| title_sort |
прогнозування умов формування тонкої смуги з високоміцних алюмінієвих сплавів залежно від швидкісних режимів валкового розливання і технологічних параметрів: processy litʹâ, 2020, tom 142, №4, p.34-41 |
| title_alt |
Prediction of the Conditions for the Formation of a Thin Strip of High-strength Aluminum Alloys, Depending on the Speed of Casting Rolls and Technological Parameters: Processy litʹâ, 2020, Tom 142, №4, p.34-41 |
| description |
Received 15.10.2020
UDK 669.185:66-932
The roller pouring is one of advanced methods of thin metal sheet manufacturing and it is widely used in engineering and other branches of industry. The analysis of influence of speed rates and technological parameters of unit for roller pouring in water-cooled crystallizer (meniscus angle, roller radius, melt overheat temperature) on the condition of metal bar forming from high-strength aluminum alloy with different thickness (2, 3 and 4 mm) was made using methods of mathematical and computing modeling. The series of executed computing experiments allowed to build the analytic dependencies for determination of optimal melt pouring speed under given technological parameters that arranged the solidification of the strips with different thickness on the level of rollers output. For high-strength aluminum alloys there were detected the pouring speeds ranges that determined different conditions of strip forming in inter-roller space and on the level of roller crystallizer output.The obtained results can be used for technology refinement and for choosing balance between technological parameters during roller equipment creation and advancing. |
| publisher |
National Academy of Sciences of Ukraine, Physical-Technological Institute of Metals and Alloys of NAS of Ukraine |
| publishDate |
2020 |
| url |
https://plit-periodical.org.ua/index.php/plit/article/view/88 |
| work_keys_str_mv |
AT tarasevičmí predictionoftheconditionsfortheformationofathinstripofhighstrengthaluminumalloysdependingonthespeedofcastingrollsandtechnologicalparametersprocessylitʹa2020tom1424p3441 AT korníêcʹív predictionoftheconditionsfortheformationofathinstripofhighstrengthaluminumalloysdependingonthespeedofcastingrollsandtechnologicalparametersprocessylitʹa2020tom1424p3441 AT nogovícinov predictionoftheconditionsfortheformationofathinstripofhighstrengthaluminumalloysdependingonthespeedofcastingrollsandtechnologicalparametersprocessylitʹa2020tom1424p3441 AT tokarêvaoo predictionoftheconditionsfortheformationofathinstripofhighstrengthaluminumalloysdependingonthespeedofcastingrollsandtechnologicalparametersprocessylitʹa2020tom1424p3441 AT tarasevičmí prognozuvannâumovformuvannâtonkoísmugizvisokomícnihalûmíníêvihsplavívzaležnovídšvidkísnihrežimívvalkovogorozlivannâítehnologíčnihparametrívprocessylitʹa2020tom1424p3441 AT korníêcʹív prognozuvannâumovformuvannâtonkoísmugizvisokomícnihalûmíníêvihsplavívzaležnovídšvidkísnihrežimívvalkovogorozlivannâítehnologíčnihparametrívprocessylitʹa2020tom1424p3441 AT nogovícinov prognozuvannâumovformuvannâtonkoísmugizvisokomícnihalûmíníêvihsplavívzaležnovídšvidkísnihrežimívvalkovogorozlivannâítehnologíčnihparametrívprocessylitʹa2020tom1424p3441 AT tokarêvaoo prognozuvannâumovformuvannâtonkoísmugizvisokomícnihalûmíníêvihsplavívzaležnovídšvidkísnihrežimívvalkovogorozlivannâítehnologíčnihparametrívprocessylitʹa2020tom1424p3441 |
| first_indexed |
2025-09-24T17:40:53Z |
| last_indexed |
2025-09-24T17:40:53Z |
| _version_ |
1850424286469160960 |