Деякі особливості процесу структурування піщано-рідкоскляної суміші у паромікрохвильовому середовищі

• Дата: 2023
• Автор: Солоненко, Л. І.
• Формат: Стаття
• Мова: Ukrainian
• Опубліковано: National Academy of Sciences of Ukraine, Physical-Technological Institute of Metals and Alloys of NAS of Ukraine 2023
• Теми: пісок; рідке скло; суміш; вода; форма; оснащення; міцність; паромікрохвильове затвердіння
• Онлайн доступ: https://plit-periodical.org.ua/index.php/plit/article/view/some-features-structuring-process-sand-liquidglass-mixture-steam
• Назва журналу: Casting Processes

State University «Odesa Polytechnic» (Odesa, Ukraine) Received 22.07.2021 UDK 621.74 The article presents the results of studies of the influence of the mass of liquid glass spent on the cladding of quartz sand, the mass of water in water charges and their location in the working space of the model-rod equipment on the strength of the sand-liquid glass mixture structured by the method of steam-microwave hardening. The work used fresh water of technical purity, sodium water glass with a specific density of ρLG = 1.42 g/cm3 and a silicate modulus МSiO2 = 2.9, quartz sand with an average particle size of 0.23 mm and with a mass content of clay up to 0.1 %. Quartz sand was clad with water glass by mechanical mixing with water glass and air drying to a granular state. The structuring of the sand-liquid glass mixture was carried out by the method of steam-microwave curing in a microwave oven with a magnetron power of 700 W and a frequency of 2.45 GHz. It has been established that an increase in the strength of casting molds and cores made by the steam-microwave curing method is facilitated by both an increase in the mass of water glass used for cladding quartz sand and the mass of water in a water charge. In order to ensure the uniformity of strength throughout the body of casting molds and cores, the water charge should be located mainly in the lower and dead-end parts of the equipment used, taking into account the direction of movement of water vapor in relation to the places of its exit from the mixture during its structuring.   References 1 Guminsky Yu. Yu., Rovin S. L. (2019). Environmentally friendly liquid glass binders modified with ultrafine material. Casting and metallurgy, no. 3, pp. 41–45. [in Russian]. DOI: 10.21122/1683-6065-2019-3-41-45.2 Shubina M. V., Kosareva E. A. (2012). The effectiveness of the use of liquid glass mixtures in the foundry. Theory and technology of metallurgical production, no. 11, pp. 108–117. [in Russian].3 Krutilin A. N., Guminsky Yu. Yu. (2018). Improving the efficiency of using liquid glass mixtures. Part 2. Electrophysical methods of exposure. Casting and metallurgy, no. 2 (91), pp. 50–56. [in Russian].4 Tkachenko S. S., Krivitskiy V. S., Emelyanov V. O., Martynov K. V. (2017). Possibility of using liquid glass molding and core sands in artistic casting. Casting and metallurgy, no. 2 (87), pp. 12–14. [in Russian].5 Belabrov E. A., Karpenkova O. L., Belobrov L. E., Belobrov E. L., Belobrov K. E. (2017). Let us recall the forgotten technologies: the curing of rods and molds from a liquid glass mixture with an air-carbon dioxide mixture. Casting of Ukraine, no. 12, pp. 23–31. [in Russian].6 Kukui D. M., Skvortsov V. A., Andrianov N. V. (2011). Foundry theory and technology. In 2 hours. Part 1. Molding materials and mixtures. Minsk: New knowledge; Moscow: INFRA-M, 384 p. [in Russian].7 Davidenko A. K., Ivanov B. K., Okhrimenko G. P., Ponomarenko O. I. (2018). Self-hardening liquid glass molding-core mixtures for the manufacture of castings for power equipment. Metal and casting of Ukraine, no. 3–4, pp. 34–39. [in Russian].8 Belobrov E. A., Karpenkova O. L., Belobrov L. E., Belobrov E. L. (2016). Let us recall the forgotten technologies: molds made of liquid glass mixtures, cured in air and with the help of portable bell-type gas or electric fan dryers. Casting of Ukraine, no. 2 (186), pp. 20–22.[in Russian].9 Method of drying casting molds: AS 64501 USSR; No. 35415; declared 09/20/1940; publ. 04/30/1945. 1 p. [in Russian].10 Belabrov E. A., Karpenkova O. L., Belobrov L. E., Belobrov K. E., Belobrov E. L. (2019). Let's remember the forgotten technologies: hardening of foundry molds with infrared and portable electric dryers. Casting of Ukraine, no. 4, pp. 24–27. [in Russian].11 Belabrov E. A., Karpenkova O. L., Belobrov L. E., Belobrov E. L. (2016). Let us recall the forgotten technologies: curing of molds and cores from liquid glass mixtures with heat in chamber dryers. Casting of Ukraine, no. 3 (187), pp. 18–22. [in Russian].12 Krutilin A. N., Guminsky Yu. Yu., Rksevich O. A., Kulbitskaya L. V. (2018). Improving the efficiency of using liquid glass mixtures. Part 4. Combined hardening. Casting and metallurgy, no. 4, pp. 38-44. DOI: 10.21122 / 1683-6065-2018-4-38-44. [in Russian].13 Method of manufacturing casting cores from liquid glass mixtures in heated tooling "Thermoshock-CO2-process": US Pat. 2630399 RF. No. 2015156533; declared 12/28/2015; publ. 09/07/2017, Bul. No. 26.9 p. [in Russian].14 Zhukovsky S. S. (2010). Cold hardening binders and mixtures for cores and molds. Directory. M.: Mashinostroenie, 256 p. [in Russian].15 Method of manufacturing casting cores and molds from liquid glass mixtures: US Pat. 2094164 RF. Appl. 04/09/1996; publ. 10/27/1997. [in Russian].16 The way of making livery forms and haircuts from a very sklyanoy sum [A method of manufacturing molds and rods from a rare glass composite]: Pat. 122538 Ukraine. No. a 201901350; declared 02/11/2019; publ. 25.11.2020, Bul. No. 22.4 p. [in Russian].