Перспективна технологія рециклінгу радіоактивного забрудненого металу на основі його плавлення
Melting of the radioactively contaminated metal converts it as a source of ionizing radiation from a surface distribution of radionuclides into the source with their volume distribution. From the surface of the melted metal gamma radiation of a part of radionuclides is emitted, which are in its scop...
Збережено в:
| Видавець: | State Scientific and Technical Center for Nuclear and Radiation Safety |
|---|---|
| Дата: | 2018 |
| Автори: | , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
State Scientific and Technical Center for Nuclear and Radiation Safety
2018
|
| Онлайн доступ: | https://nuclear-journal.com/index.php/journal/article/view/100 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Репозиторії
Nuclear and Radiation Safety| Резюме: | Melting of the radioactively contaminated metal converts it as a source of ionizing radiation from a surface distribution of radionuclides into the source with their volume distribution. From the surface of the melted metal gamma radiation of a part of radionuclides is emitted, which are in its scope. Alpha and beta radiation are absorbed completely in the metal.
To obtain a radiation-safe metal it is necessary that the amount of gamma-emitting radionuclides, which are loaded into the furnace together with the charge, did not exceed the established allowable level.
The radiation safety criterion of the melted metal is the maximum value of the gamma radiation power from its surface, the established limit of the individual annual effective radiation dose is not exceeded.
There is a need for experimental verification of theoretical results was obtained. The use of this technology will allow the return to industrial production of large amounts of accumulated radioactively contaminated metal and creates conditions for the prevention of environmental violations. |
|---|