Особливості управління аварією з течею теплоносія з першого контуру в другий з використанням регулюючого клапана на напорі САОЗ ВТ

The features of primary-to-secondary leak accident progression with high pressure injection system (HPIS) flow control using a control valve (CV) compared with HPIS operation without CV were analyzed within the scope of the revised accident management strategy. The management strategy for primary-to...

Повний опис

Збережено в:
Бібліографічні деталі
Видавець:State Scientific and Technical Center for Nuclear and Radiation Safety
Дата:2016
Автори: Nosovsky, А., Guryev, A., Serafyn, R., Ivaniuk, O.
Формат: Стаття
Мова:Ukrainian
Опубліковано: State Scientific and Technical Center for Nuclear and Radiation Safety 2016
Онлайн доступ:https://nuclear-journal.com/index.php/journal/article/view/18
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!

Репозиторії

Nuclear and Radiation Safety
id oai:ojs2.nuclear-journal.com:article-18
record_format ojs
spelling oai:ojs2.nuclear-journal.com:article-182019-03-02T09:03:10Z Features of Primary-to-Secondary Leak Accident Management Using Control Valve on HPIS Pressure Side Особливості управління аварією з течею теплоносія з першого контуру в другий з використанням регулюючого клапана на напорі САОЗ ВТ Nosovsky, А. Guryev, A. Serafyn, R. Ivaniuk, O. The features of primary-to-secondary leak accident progression with high pressure injection system (HPIS) flow control using a control valve (CV) compared with HPIS operation without CV were analyzed within the scope of the revised accident management strategy. The management strategy for primary-to-secondary leak accident designed for symptom-oriented emergency instructions of South Ukrainian NPP unit 3 was taken as a basic strategy. The evaluation of CV efficiency applied two modes for CV (pressurizer filling mode and supporting of margin to saturation in the primary system mode), which have been used depending on the stage of the accident (before and after level recovery in pressurizer). Research was carried out for the accident progression without any equipment failures and for the accident with the failures of emergency gas removal system valve in the fully open position. In addition, the experts performed comparative calculations of the integral leak flow for the different diameters of the leak for cases with using and without using CV for HPIS. The calculation results were shown that automated work of the CV can reduce integral leak flow and ensure an adequate margin to saturation in the primary system, but comes with the self-oscillations phenomenon. Проаналізовано особливості протікання аварії з течею теплоносія з першого контуру в другий з можливістю управління витратою на напорі системи аварійного охолодження активної зони реакторної установки з насосами високого тиску (САОЗ ВТ) за допомогою регулюючого клапана (РК) порівняно з роботою САОЗ ВТ без РК у рамках оновленої стратегії з ліквідації аварії. Досліджувалося протікання аварії без відмов обладнання, а також з відмовою арматури системи аварійного газовидалення у повністю відкритому положенні. За результатами розрахунків автоматизивона робота РК дає змогу зменшити інтегральну витрату в течу та забезпечити підтримання необхідного запасу до насичення в першому контурі, проте супроводжується явищем автоколивань. State Scientific and Technical Center for Nuclear and Radiation Safety 2016-05-20 Article Article application/pdf https://nuclear-journal.com/index.php/journal/article/view/18 10.32918/nrs.2016.2(70).06 Nuclear and Radiation Safety; No 2(70) (2016): Nuclear and Radiation Safety; 27-31 Ядерна та радіаційна безпека; № 2(70) (2016): Ядерна та радіаційна безпека; 27-31 2073-6231 uk https://nuclear-journal.com/index.php/journal/article/view/18/18
institution Nuclear and Radiation Safety
collection OJS
language Ukrainian
format Article
author Nosovsky, А.
Guryev, A.
Serafyn, R.
Ivaniuk, O.
spellingShingle Nosovsky, А.
Guryev, A.
Serafyn, R.
Ivaniuk, O.
Особливості управління аварією з течею теплоносія з першого контуру в другий з використанням регулюючого клапана на напорі САОЗ ВТ
author_facet Nosovsky, А.
Guryev, A.
Serafyn, R.
Ivaniuk, O.
author_sort Nosovsky, А.
title Особливості управління аварією з течею теплоносія з першого контуру в другий з використанням регулюючого клапана на напорі САОЗ ВТ
title_short Особливості управління аварією з течею теплоносія з першого контуру в другий з використанням регулюючого клапана на напорі САОЗ ВТ
title_full Особливості управління аварією з течею теплоносія з першого контуру в другий з використанням регулюючого клапана на напорі САОЗ ВТ
title_fullStr Особливості управління аварією з течею теплоносія з першого контуру в другий з використанням регулюючого клапана на напорі САОЗ ВТ
title_full_unstemmed Особливості управління аварією з течею теплоносія з першого контуру в другий з використанням регулюючого клапана на напорі САОЗ ВТ
title_sort особливості управління аварією з течею теплоносія з першого контуру в другий з використанням регулюючого клапана на напорі саоз вт
title_alt Features of Primary-to-Secondary Leak Accident Management Using Control Valve on HPIS Pressure Side
description The features of primary-to-secondary leak accident progression with high pressure injection system (HPIS) flow control using a control valve (CV) compared with HPIS operation without CV were analyzed within the scope of the revised accident management strategy. The management strategy for primary-to-secondary leak accident designed for symptom-oriented emergency instructions of South Ukrainian NPP unit 3 was taken as a basic strategy. The evaluation of CV efficiency applied two modes for CV (pressurizer filling mode and supporting of margin to saturation in the primary system mode), which have been used depending on the stage of the accident (before and after level recovery in pressurizer). Research was carried out for the accident progression without any equipment failures and for the accident with the failures of emergency gas removal system valve in the fully open position. In addition, the experts performed comparative calculations of the integral leak flow for the different diameters of the leak for cases with using and without using CV for HPIS. The calculation results were shown that automated work of the CV can reduce integral leak flow and ensure an adequate margin to saturation in the primary system, but comes with the self-oscillations phenomenon.
publisher State Scientific and Technical Center for Nuclear and Radiation Safety
publishDate 2016
url https://nuclear-journal.com/index.php/journal/article/view/18
work_keys_str_mv AT nosovskya featuresofprimarytosecondaryleakaccidentmanagementusingcontrolvalveonhpispressureside
AT guryeva featuresofprimarytosecondaryleakaccidentmanagementusingcontrolvalveonhpispressureside
AT serafynr featuresofprimarytosecondaryleakaccidentmanagementusingcontrolvalveonhpispressureside
AT ivaniuko featuresofprimarytosecondaryleakaccidentmanagementusingcontrolvalveonhpispressureside
AT nosovskya osoblivostíupravlínnâavaríêûztečeûteplonosíâzperšogokonturuvdrugijzvikoristannâmregulûûčogoklapanananaporísaozvt
AT guryeva osoblivostíupravlínnâavaríêûztečeûteplonosíâzperšogokonturuvdrugijzvikoristannâmregulûûčogoklapanananaporísaozvt
AT serafynr osoblivostíupravlínnâavaríêûztečeûteplonosíâzperšogokonturuvdrugijzvikoristannâmregulûûčogoklapanananaporísaozvt
AT ivaniuko osoblivostíupravlínnâavaríêûztečeûteplonosíâzperšogokonturuvdrugijzvikoristannâmregulûûčogoklapanananaporísaozvt
first_indexed 2024-09-01T17:38:30Z
last_indexed 2024-09-01T17:38:30Z
_version_ 1809016224378519552