Основні підходи до управління старінням кабельної продукції на АЕС України

• Дата: 2019
• Автори: Bilan, T., Rezvik, I., Sakhno, O., But, O., Bogdanov, S.
• Формат: Стаття
• Мова: Ukrainian
• Опубліковано: State Scientific and Technical Center for Nuclear and Radiation Safety 2019
• Онлайн доступ: https://nuclear-journal.com/index.php/journal/article/view/189
• Назва журналу: Nuclear and Radiation Safety

The mechanisms of cable ageing at nuclear power plants (NPPs) mainly depending on the insulation material, as well as the damaging factors affecting cables that are determined by the operating conditions are considered in the paper. The main and additional mechanisms of aging resulting from the effects of damaging factors are provided. The paper presents the main methods of cable aging management: determining the actual service life and testing using field methods and other means. The basic principles for the arrangement of cable aging management at Ukrainian NPPs, as well as the methods used to investigate the technical condition of cables, are presented. A list of mandatory lists has been defined when performing activities on cable aging management. A methodology is described for lifetime extension of cables, and conditions for extending the service life of cables that are in service are provided. A number of methods of testing cables for aging management are considered: visual inspection of insulation and measurement of crack size, discoloration, etc.; insulation hardness test; insulation chemical analysis; electrical insulation tests; tensile strength measurement; measurement of elongation at break; measurements of dielectric loss at low frequency or sweep frequency; testing by dynamic reflectometry method; AC and DC current impedance measurements. The paper presents results of separate laboratory studies for selected 1 kV representative power cables with PVC insulation of SUNPP-1, ZNPP-1 and KhNPP-2 conducted within Ukrainian NPP long-term operation, which included a stage of laboratory examination and examination of cable samples in operating conditions. The following results were obtained: dependence of VVGng 4x6 cable lifetime on operating temperature; dependence of AVVG cable lifetime on operating temperature; dependence of AVVG (a) cable lifetime on operating temperature. There are possibilities and conditions under which the use of cables within long-term operation is permissible.