Застосування моделі деформації оболонок твелів розрахункового коду RELAP5/MOD3.2 для палива реакторів ВВЕР-1000 в аналізі проектних аварій
The paper presents applicability of built-in RELAP5/MOD3.2 cladding deformation model for VVER-1000 fuel with cladding of Zr+1 % Nb alloy. Experimental data and simplified model of fuel assembly channel of the core are used for this purpose. The model applicability is tested for the hot channel bloc...
Збережено в:
| Дата: | 2016 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
State Scientific and Technical Center for Nuclear and Radiation Safety
2016
|
| Онлайн доступ: | https://nuclear-journal.com/index.php/journal/article/view/30 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Nuclear and Radiation Safety |
Репозитарії
Nuclear and Radiation Safety| Резюме: | The paper presents applicability of built-in RELAP5/MOD3.2 cladding deformation model for VVER-1000 fuel with cladding of Zr+1 % Nb alloy. Experimental data and simplified model of fuel assembly channel of the core are used for this purpose. The model applicability is tested for the hot channel blockage after cladding swelling and rupture in the interval of temperatures from 600 to 1200°С and interval of pressures from 1 to 12 MPa. It is demonstrated that RELAP5/MOD3.2 builtin model of cladding deformation can be applied to VVER-1000 cladding of Zr+1%Nb alloy rupture estimation only in the certain limited range of parameters. The analysis of RELAP5/MOD3.2 cladding deformation model parameters influence on the peak cladding temperature in double-ended cold leg break was performed. The paper presents recommendations on the use of RELAP5/MOD3.2 built-in cladding deformation model in the design basis accident analysis of VVER-1000 reactors. |
|---|