РОЗРАХУНОК БЛОКУ ТАРІЛЧАСТИХ ПРУЖИН У СИЛОВОМУ АКУМУЛЯТОРІ СТАБІЛІЗАЦІЇ ТИСКУ ПРЕСУВАННЯ ОСЕРДЯ СТАТОРА ПОТУЖНОГО ТУРБОГЕНЕРАТОРА

• Datum: 2023
• Hauptverfasser: Левицький, А.C., Зайцев, Є.O., Сорокіна, Н.Л.
• Format: Artikel
• Sprache: Ukrainian
• Veröffentlicht: Інститут електродинаміки Національної академії наук України 2023
• Schlagworte: потужний турбогенератор; осердя статора; тиск пресування; стабілізація тиску; силовий акумулятор; блок тарілчастих пружин; механічна характеристика
• Online Zugang: https://prc.ied.org.ua/index.php/proceedings/article/view/240
• Назва журналу: Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine

The results of an analytical review of modern methods and means of restoring and stabilizing the pressing pressure of the stator core of a powerful turbogenerator (TG) during operation are presented. The advantages and features of the use of power accumulators (PA) with blocks of disk springs for pressure stabilization, which are installed under the tightening nuts or instead of them on the threaded ends of the tightening prisms, are described. A number of TG and PA parameters that must be known to calculate the mechanical characteristics of the conic  springs  unit are outlined. It is shown that the optimal method of assembling disc springs into blocks in CA is combined (series-parallel). Based on the specified design parameters, the dependence of the force created by the disc spring and the spring block on the spring thickness was obtained. The dependence of the force of the spring block on the displacement of the pressure plate of the stator core for different values ​​of the spring thickness was determined. The method of calculating the strength of disc springs is given