МЕТОДИКА ІДЕНТИФІКАЦІЇ ПАРАМЕТРІВ ПРУЖНОЇ МОДЕЛІ ВАЛОПРОВОДУ ТУРБОАГРЕГАТУ ДЛЯ МОДЕЛЮВАННЯ КРУТИЛЬНИХ КОЛИВАНЬ
The mathematical models of different dimensions with a finite number of degrees of freedom of a powerful turbine-generator shaft, which is used to calculate the torsional vibrations of the shaft train, were compared. The computational studies of transients during switching of the turbine-generator t...
Збережено в:
| Дата: | 2017 |
|---|---|
| Автори: | , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
Інститут електродинаміки Національної академії наук України
2017
|
| Теми: | |
| Онлайн доступ: | https://prc.ied.org.ua/index.php/proceedings/article/view/264 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine |
Репозитарії
Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine| Резюме: | The mathematical models of different dimensions with a finite number of degrees of freedom of a powerful turbine-generator shaft, which is used to calculate the torsional vibrations of the shaft train, were compared. The computational studies of transients during switching of the turbine-generator to parallel operation with the electrical system with no-load conditions using different mathematical models of the shaft train and comparison of torsional moments were performed. The method of parameter identification for the multi-mass model of the shaft line of the turbine set using an iterative conjugate gradient method and a heuristic genetic algorithm was developed. The performed computational studies have shown efficiency of the developed technique. References 12, figures 6. |
|---|