РОЗРАХУНОК ПОХИБКИ ЄМНІСНОГО СЕНСОРА ПОВІТРЯНОГО ПРОМІЖКУ В ГІДРОГЕНЕРАТОРАХ З СИСТЕМОЮ КОМПЛАНАРНИХ ЕЛЕКТРОДІВ, ЗУМОВЛЕНОЇ ПЕРЕКОСОМ

In this paper calculating the technological errors that arise when using capacitive sensors to measure the air gap (AG) in hydrogen generators, in particular, those caused by the inaccuracy of their installation on the machine. The results of the analysis of the error caused by the skew of the plane...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Datum:2024
Hauptverfasser: Левицький, А.С., Зайцев, Є.O., Рассовский, В.Л., Закусило, С.A.
Format: Artikel
Sprache:Ukrainisch
Veröffentlicht: Інститут електродинаміки Національної академії наук України 2024
Schlagworte:
Online Zugang:https://prc.ied.org.ua/index.php/proceedings/article/view/367
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine

Institution

Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine
_version_ 1856543818445225984
author Левицький, А.С.
Зайцев, Є.O.
Рассовский, В.Л.
Закусило, С.A.
author_facet Левицький, А.С.
Зайцев, Є.O.
Рассовский, В.Л.
Закусило, С.A.
author_sort Левицький, А.С.
baseUrl_str
collection OJS
datestamp_date 2025-01-06T13:47:05Z
description In this paper calculating the technological errors that arise when using capacitive sensors to measure the air gap (AG) in hydrogen generators, in particular, those caused by the inaccuracy of their installation on the machine. The results of the analysis of the error caused by the skew of the plane of the sensor electrodes relative to the constructive boring of the stator core are given. It was found that the skew of the electrodes could significantly affect the accuracy of the measurements, which in turn affects the efficiency and reliability of the hydrogen generator. A detailed assessment of the influence of this skew on the measurement results was carried out using a sensor consisting of a system of N coplanar parallel strip electrodes located perpendicular to the core boring. A calculation scheme has been developed for the quantitative assessment of the error, which allows determining the value of the error taking into account analytical dependencies. Numerical methods were used to assess the influence of skew on the accuracy of measurements, and the results were obtained for a sensor designed for a capsule hydrogen generator of the SGK538/160-70M type. Based on the obtained results, practical recommendations have been developed to reduce the impact of skew error on measurement accuracy. Ref. 11, fig. 6.
first_indexed 2025-09-24T17:31:55Z
format Article
id oai:ojs2.prc.new-point.com.ua:article-367
institution Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine
language Ukrainian
last_indexed 2025-09-24T17:31:55Z
publishDate 2024
publisher Інститут електродинаміки Національної академії наук України
record_format ojs
spelling oai:ojs2.prc.new-point.com.ua:article-3672025-01-06T13:47:05Z CALCULATION OF PLATE SKEW ERROR OF THE AIR GAP CAPACITIVE SENSOR IN HYDROGEN GENERATORS WITH A SYSTEM OF COPLANAR ELECTRODES РОЗРАХУНОК ПОХИБКИ ЄМНІСНОГО СЕНСОРА ПОВІТРЯНОГО ПРОМІЖКУ В ГІДРОГЕНЕРАТОРАХ З СИСТЕМОЮ КОМПЛАНАРНИХ ЕЛЕКТРОДІВ, ЗУМОВЛЕНОЇ ПЕРЕКОСОМ Левицький, А.С. Зайцев, Є.O. Рассовский, В.Л. Закусило, С.A. гідрогенератор повітряний проміжок між статором і ротором вимірювання ємнісний сенсор перекіс площини сенсора похибка hydrogen generator air gap between stator and rotor measurement capacitive sensor skew of the sensor plane error In this paper calculating the technological errors that arise when using capacitive sensors to measure the air gap (AG) in hydrogen generators, in particular, those caused by the inaccuracy of their installation on the machine. The results of the analysis of the error caused by the skew of the plane of the sensor electrodes relative to the constructive boring of the stator core are given. It was found that the skew of the electrodes could significantly affect the accuracy of the measurements, which in turn affects the efficiency and reliability of the hydrogen generator. A detailed assessment of the influence of this skew on the measurement results was carried out using a sensor consisting of a system of N coplanar parallel strip electrodes located perpendicular to the core boring. A calculation scheme has been developed for the quantitative assessment of the error, which allows determining the value of the error taking into account analytical dependencies. Numerical methods were used to assess the influence of skew on the accuracy of measurements, and the results were obtained for a sensor designed for a capsule hydrogen generator of the SGK538/160-70M type. Based on the obtained results, practical recommendations have been developed to reduce the impact of skew error on measurement accuracy. Ref. 11, fig. 6. У статті розглянуто технологічні похибки, що виникають у разі використання ємнісних сенсорів для вимірювання повітряного проміжку (ПП) в гідрогенераторах, зокрема ті, що зумовлені неточністю їхнього встановлення на машині. Основну увагу приділено аналізу похибки, викликаної перекосом площини електродів сенсора відносно твірної розточення осердя статора. Виявлено, що перекіс електродів може суттєво впливати на точність вимірювань, що зі свого боку впливає на ефективність та надійність роботи гідрогенератора. Проведено детальну оцінку впливу цього перекосу на результати вимірювання за допомогою сенсора, який складається із системи з N компланарних паралельних стрічкових електродів, розташованих перпендикулярно до твірної розточення осердя. Розроблено розрахункову схему для кількісної оцінки похибки, що дає змогу визначити величину похибки з урахуванням аналітичних залежностей. Використано числові методи для оцінки впливу перекосу на точність вимірювань.  Результати були отримані для сенсора, призначеного для капсульного гідрогенератора типу СГК538/160-70М. На основі отриманих результатів розроблено практичні рекомендації щодо зменшення впливу похибки від перекосу на точність вимірювання. Бібл. 11, рис. 6.   Інститут електродинаміки Національної академії наук України 2024-11-27 Article Article application/pdf https://prc.ied.org.ua/index.php/proceedings/article/view/367 10.15407/publishing2024.69.119 Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine; No. 69 (2024): Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine ; 119 Праці Інституту електродинаміки Національної академії наук України; № 69 (2024): Праці Інституту електродинаміки Національної академії наук України; 119 2786-7064 1727-9895 10.15407/publishing2024.69 uk https://prc.ied.org.ua/index.php/proceedings/article/view/367/361 Авторське право (c) 2024 А.С. Левицький, Є.O. Зайцев, В.Л. Рассовский, С.A. Закусило https://creativecommons.org/licenses/by-nc-nd/4.0
spellingShingle гідрогенератор
повітряний проміжок між статором і ротором
вимірювання
ємнісний сенсор
перекіс площини сенсора
похибка
Левицький, А.С.
Зайцев, Є.O.
Рассовский, В.Л.
Закусило, С.A.
РОЗРАХУНОК ПОХИБКИ ЄМНІСНОГО СЕНСОРА ПОВІТРЯНОГО ПРОМІЖКУ В ГІДРОГЕНЕРАТОРАХ З СИСТЕМОЮ КОМПЛАНАРНИХ ЕЛЕКТРОДІВ, ЗУМОВЛЕНОЇ ПЕРЕКОСОМ
title РОЗРАХУНОК ПОХИБКИ ЄМНІСНОГО СЕНСОРА ПОВІТРЯНОГО ПРОМІЖКУ В ГІДРОГЕНЕРАТОРАХ З СИСТЕМОЮ КОМПЛАНАРНИХ ЕЛЕКТРОДІВ, ЗУМОВЛЕНОЇ ПЕРЕКОСОМ
title_alt CALCULATION OF PLATE SKEW ERROR OF THE AIR GAP CAPACITIVE SENSOR IN HYDROGEN GENERATORS WITH A SYSTEM OF COPLANAR ELECTRODES
title_full РОЗРАХУНОК ПОХИБКИ ЄМНІСНОГО СЕНСОРА ПОВІТРЯНОГО ПРОМІЖКУ В ГІДРОГЕНЕРАТОРАХ З СИСТЕМОЮ КОМПЛАНАРНИХ ЕЛЕКТРОДІВ, ЗУМОВЛЕНОЇ ПЕРЕКОСОМ
title_fullStr РОЗРАХУНОК ПОХИБКИ ЄМНІСНОГО СЕНСОРА ПОВІТРЯНОГО ПРОМІЖКУ В ГІДРОГЕНЕРАТОРАХ З СИСТЕМОЮ КОМПЛАНАРНИХ ЕЛЕКТРОДІВ, ЗУМОВЛЕНОЇ ПЕРЕКОСОМ
title_full_unstemmed РОЗРАХУНОК ПОХИБКИ ЄМНІСНОГО СЕНСОРА ПОВІТРЯНОГО ПРОМІЖКУ В ГІДРОГЕНЕРАТОРАХ З СИСТЕМОЮ КОМПЛАНАРНИХ ЕЛЕКТРОДІВ, ЗУМОВЛЕНОЇ ПЕРЕКОСОМ
title_short РОЗРАХУНОК ПОХИБКИ ЄМНІСНОГО СЕНСОРА ПОВІТРЯНОГО ПРОМІЖКУ В ГІДРОГЕНЕРАТОРАХ З СИСТЕМОЮ КОМПЛАНАРНИХ ЕЛЕКТРОДІВ, ЗУМОВЛЕНОЇ ПЕРЕКОСОМ
title_sort розрахунок похибки ємнісного сенсора повітряного проміжку в гідрогенераторах з системою компланарних електродів, зумовленої перекосом
topic гідрогенератор
повітряний проміжок між статором і ротором
вимірювання
ємнісний сенсор
перекіс площини сенсора
похибка
topic_facet гідрогенератор
повітряний проміжок між статором і ротором
вимірювання
ємнісний сенсор
перекіс площини сенсора
похибка
hydrogen generator
air gap between stator and rotor
measurement
capacitive sensor
skew of the sensor plane
error
url https://prc.ied.org.ua/index.php/proceedings/article/view/367
work_keys_str_mv AT levicʹkijas calculationofplateskewerroroftheairgapcapacitivesensorinhydrogengeneratorswithasystemofcoplanarelectrodes
AT zajcevêo calculationofplateskewerroroftheairgapcapacitivesensorinhydrogengeneratorswithasystemofcoplanarelectrodes
AT rassovskijvl calculationofplateskewerroroftheairgapcapacitivesensorinhydrogengeneratorswithasystemofcoplanarelectrodes
AT zakusilosa calculationofplateskewerroroftheairgapcapacitivesensorinhydrogengeneratorswithasystemofcoplanarelectrodes
AT levicʹkijas rozrahunokpohibkiêmnísnogosensorapovítrânogopromížkuvgídrogeneratorahzsistemoûkomplanarnihelektrodívzumovlenoíperekosom
AT zajcevêo rozrahunokpohibkiêmnísnogosensorapovítrânogopromížkuvgídrogeneratorahzsistemoûkomplanarnihelektrodívzumovlenoíperekosom
AT rassovskijvl rozrahunokpohibkiêmnísnogosensorapovítrânogopromížkuvgídrogeneratorahzsistemoûkomplanarnihelektrodívzumovlenoíperekosom
AT zakusilosa rozrahunokpohibkiêmnísnogosensorapovítrânogopromížkuvgídrogeneratorahzsistemoûkomplanarnihelektrodívzumovlenoíperekosom