РОБОЧІ ХАРАКТЕРИСТИКИ ЕЛЕКТРОМАГНІТНОГО ДОЗАТОРА УСТАНОВКИ ДЛЯ ЛИТТЯ СВИНЦЕВИХ ГРАНУЛ
For the installation for casting lead granules with induction current supply to the channel of the electromagnetic doser in order to reduce metal overheating at the outlet of the nozzle, it is proposed to make the channel part of the doser in the form of two consecutive sections: directly the channe...
Saved in:
| Published in: | Праці Інституту електродинаміки Національної академії наук України |
|---|---|
| Date: | 2026 |
| Issue: | 74 |
| Pages: | 005 |
| ISSN: | 2786-7064 |
| Author Affiliations: |
|
| Main Authors: | , , |
| Format: | Article |
| Published: |
Інститут електродинаміки Національної академії наук України
2026
|
| Subjects: | |
| Online Access: | https://prc.ied.org.ua/index.php/proceedings/article/view/424 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine |
Institution
Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine| _version_ | 1874636297053667328 |
|---|---|
| author | Жаркін, А.Ф. Гориславець, Ю.М. Глухенький, О.І. |
| author_facet | Жаркін, А.Ф. Гориславець, Ю.М. Глухенький, О.І. |
| author_institution_txt_mv | [
{
"author": "А.Ф. Жаркін",
"institution": "Інститут електродинаміки НАН України, пр. Берестейський, 56, Київ, 03057, Україна",
"orcid": "0000-0001-5996-0901"
},
{
"author": "Ю.М. Гориславець",
"institution": "Інститут електродинаміки НАН України, пр. Берестейський, 56, Київ, 03057, Україна",
"orcid": ""
},
{
"author": "О.І. Глухенький",
"institution": "Інститут електродинаміки НАН України, пр. Берестейський, 56, Київ, 03057, Україна",
"orcid": ""
}
] |
| author_orcid_str_mv | 0000-0001-5996-0901 |
| author_sort | Жаркін, А.Ф. |
| baseUrl_str | https://prc.ied.org.ua/index.php/proceedings/oai |
| collection | OJS |
| container_end_page | 005 |
| container_issue | 74 |
| container_start_page | 005 |
| container_title | Праці Інституту електродинаміки Національної академії наук України |
| container_volume | |
| datestamp_date | 2026-08-26T12:22:45Z |
| description | For the installation for casting lead granules with induction current supply to the channel of the electromagnetic doser in order to reduce metal overheating at the outlet of the nozzle, it is proposed to make the channel part of the doser in the form of two consecutive sections: directly the channel with liquid metal located in the gap of the electromagnet, and the copper bus. The latter conductively connects the flanged end of the channel with the working compartment of the doser, thereby forming a closed electric circuit for inductive supply of electric current. Based on previously performed experimental studies, the operating characteristics of the electromagnetic doser were obtained in the form of generalized dependences of the electric current in the liquid metal of the doser channel, its optimal frequency and the melt flow rate through the doser on the diameter of the granules. By means of multiphysical modeling, the thermal state of the electromagnetic doser with a combined channel part was investigated and its thermal characteristics were obtained. It is shown that for the proposed doser design, the overheating of the melt at the outlet of the nozzle relative to the temperature of the metal at the inlet to the channel does not exceed the maximum permissible value for stable shaping and effective cooling of the granules. Ref. 7, fig. 6. |
| first_indexed | 2026-08-27T01:01:29Z |
| format | Article |
| fulltext | |
| id | oai:ojs2.prc.new-point.com.ua:article-424 |
| institution | Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine |
| issn | 2786-7064 |
| keywords_txt_mv | |
| last_indexed | 2026-08-27T01:01:29Z |
| publishDate | 2026 |
| publisher | Інститут електродинаміки Національної академії наук України |
| record_format | ojs |
| resource_txt_mv | |
| spelling | oai:ojs2.prc.new-point.com.ua:article-4242026-08-26T12:22:45Z OPERATING CHARACTERISTICS OF THE ELECTROMAGNETIC DOSER OF THE INSTALLATION FOR CASTING LEAD GRANULES РОБОЧІ ХАРАКТЕРИСТИКИ ЕЛЕКТРОМАГНІТНОГО ДОЗАТОРА УСТАНОВКИ ДЛЯ ЛИТТЯ СВИНЦЕВИХ ГРАНУЛ Жаркін, А.Ф. Гориславець, Ю.М. Глухенький, О.І. установка для лиття свинцевих гранул електромагнітний дозатор робочі характеристики комбінована канальна частина мультифізичне моделювання перегрів металу installation for casting lead granules electromagnetic doser operating characteristics combined channel part multiphysics modeling metal overheating For the installation for casting lead granules with induction current supply to the channel of the electromagnetic doser in order to reduce metal overheating at the outlet of the nozzle, it is proposed to make the channel part of the doser in the form of two consecutive sections: directly the channel with liquid metal located in the gap of the electromagnet, and the copper bus. The latter conductively connects the flanged end of the channel with the working compartment of the doser, thereby forming a closed electric circuit for inductive supply of electric current. Based on previously performed experimental studies, the operating characteristics of the electromagnetic doser were obtained in the form of generalized dependences of the electric current in the liquid metal of the doser channel, its optimal frequency and the melt flow rate through the doser on the diameter of the granules. By means of multiphysical modeling, the thermal state of the electromagnetic doser with a combined channel part was investigated and its thermal characteristics were obtained. It is shown that for the proposed doser design, the overheating of the melt at the outlet of the nozzle relative to the temperature of the metal at the inlet to the channel does not exceed the maximum permissible value for stable shaping and effective cooling of the granules. Ref. 7, fig. 6. Для установки лиття свинцевих гранул з індукційним підведенням струму в канал електромагнітного дозатора з метою зменшення перегріву металу на виході з насадка запропоновано канальну частину дозатора виконати у вигляді двох послідовних секцій: безпосередньо каналу з рідким металом, що знаходиться у проміжку електромагніту, і мідної шини. Остання кондуктивно з’єднує закритий фланцем торець каналу з робочим відсіком дозатора, формуючи тим самим замкнене електричне коло для індуктивного підведення електричного струму. На основі виконаних раніше експериментальних досліджень отримано робочі характеристики електромагнітного дозатора у вигляді узагальнюючих залежностей електричного струму в рідкому металі каналу дозатора, його оптимальної частоти та витрати розплаву через дозатор від діаметра гранул. Шляхом мультифізичного моделювання досліджено тепловий стан електромагнітного дозатора з комбінованою канальною частиною та отримано його теплові характеристики. Показано, що для запропонованої конструкції дозатора перегрів розплаву на виході з насадка відносно температури металу на вході в канал не перевищує гранично припустимого значення для стабільного формоутворення та ефективного охолодження гранул. Бібл. 7, рис. 6. Інститут електродинаміки Національної академії наук України 2026-08-26 Article Article https://prc.ied.org.ua/index.php/proceedings/article/view/424 Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine; No. 74 (2026): Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine ; 005 Праці Інституту електродинаміки Національної академії наук України; № 74 (2026): Праці Інституту електродинаміки Національної академії наук України; 005 2786-7064 1727-9895 10.15407/publishing2026.74 Авторське право (c) 2026 А.Ф. Жаркін, Ю.М. Гориславець, О.І. Глухенький https://creativecommons.org/licenses/by-nc-nd/4.0 |
| spellingShingle | установка для лиття свинцевих гранул електромагнітний дозатор робочі характеристики комбінована канальна частина мультифізичне моделювання перегрів металу Жаркін, А.Ф. Гориславець, Ю.М. Глухенький, О.І. РОБОЧІ ХАРАКТЕРИСТИКИ ЕЛЕКТРОМАГНІТНОГО ДОЗАТОРА УСТАНОВКИ ДЛЯ ЛИТТЯ СВИНЦЕВИХ ГРАНУЛ |
| title | РОБОЧІ ХАРАКТЕРИСТИКИ ЕЛЕКТРОМАГНІТНОГО ДОЗАТОРА УСТАНОВКИ ДЛЯ ЛИТТЯ СВИНЦЕВИХ ГРАНУЛ |
| title_alt | OPERATING CHARACTERISTICS OF THE ELECTROMAGNETIC DOSER OF THE INSTALLATION FOR CASTING LEAD GRANULES |
| title_full | РОБОЧІ ХАРАКТЕРИСТИКИ ЕЛЕКТРОМАГНІТНОГО ДОЗАТОРА УСТАНОВКИ ДЛЯ ЛИТТЯ СВИНЦЕВИХ ГРАНУЛ |
| title_fullStr | РОБОЧІ ХАРАКТЕРИСТИКИ ЕЛЕКТРОМАГНІТНОГО ДОЗАТОРА УСТАНОВКИ ДЛЯ ЛИТТЯ СВИНЦЕВИХ ГРАНУЛ |
| title_full_unstemmed | РОБОЧІ ХАРАКТЕРИСТИКИ ЕЛЕКТРОМАГНІТНОГО ДОЗАТОРА УСТАНОВКИ ДЛЯ ЛИТТЯ СВИНЦЕВИХ ГРАНУЛ |
| title_short | РОБОЧІ ХАРАКТЕРИСТИКИ ЕЛЕКТРОМАГНІТНОГО ДОЗАТОРА УСТАНОВКИ ДЛЯ ЛИТТЯ СВИНЦЕВИХ ГРАНУЛ |
| title_sort | робочі характеристики електромагнітного дозатора установки для лиття свинцевих гранул |
| topic | установка для лиття свинцевих гранул електромагнітний дозатор робочі характеристики комбінована канальна частина мультифізичне моделювання перегрів металу |
| topic_facet | установка для лиття свинцевих гранул електромагнітний дозатор робочі характеристики комбінована канальна частина мультифізичне моделювання перегрів металу installation for casting lead granules electromagnetic doser operating characteristics combined channel part multiphysics modeling metal overheating |
| url | https://prc.ied.org.ua/index.php/proceedings/article/view/424 |
| work_keys_str_mv | AT žarkínaf operatingcharacteristicsoftheelectromagneticdoseroftheinstallationforcastingleadgranules AT gorislavecʹûm operatingcharacteristicsoftheelectromagneticdoseroftheinstallationforcastingleadgranules AT gluhenʹkijoí operatingcharacteristicsoftheelectromagneticdoseroftheinstallationforcastingleadgranules AT žarkínaf robočíharakteristikielektromagnítnogodozatoraustanovkidlâlittâsvincevihgranul AT gorislavecʹûm robočíharakteristikielektromagnítnogodozatoraustanovkidlâlittâsvincevihgranul AT gluhenʹkijoí robočíharakteristikielektromagnítnogodozatoraustanovkidlâlittâsvincevihgranul |