ОПТИМІЗАЦІЯ МАС ОБЕРТАЛЬНИХ ВУЗЛІВ МЕХАНІЧНИХ ПЕРЕДАЧ МАШИННОГО АГРЕГАТУ
Introduction. The stabilization of kinematic and dynamic characteristics in machine assemblies, which exhibitperiodic changes during steady-state operation, has necessitated the development of methods for optimizing flywheel masses to enhance the productivity of machine executive bodies.Problem Stat...
Збережено в:
| Дата: | 2025 |
|---|---|
| Автори: | , , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
PH “Akademperiodyka”
2025
|
| Теми: | |
| Онлайн доступ: | https://scinn-eng.org.ua/ojs/index.php/ni/article/view/741 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Science and Innovation |
Репозитарії
Science and Innovation| id |
oai:ojs2.scinn-eng.org.ua:article-741 |
|---|---|
| record_format |
ojs |
| institution |
Science and Innovation |
| baseUrl_str |
|
| datestamp_date |
2025-04-13T14:38:04Z |
| collection |
OJS |
| language |
English |
| topic |
механічна передача машинний агрегат маховик вузол маса зубчасте колесо вал крутний момент |
| spellingShingle |
механічна передача машинний агрегат маховик вузол маса зубчасте колесо вал крутний момент ROMANIUK, O. CHASOV, D. ROMANIUK, Ya. SASOV, O. BEIHUL, V. ОПТИМІЗАЦІЯ МАС ОБЕРТАЛЬНИХ ВУЗЛІВ МЕХАНІЧНИХ ПЕРЕДАЧ МАШИННОГО АГРЕГАТУ |
| topic_facet |
механічна передача машинний агрегат маховик вузол маса зубчасте колесо вал крутний момент mechanical transmission machine unit flywheel assembly mass gear wheel shaft torque. |
| format |
Article |
| author |
ROMANIUK, O. CHASOV, D. ROMANIUK, Ya. SASOV, O. BEIHUL, V. |
| author_facet |
ROMANIUK, O. CHASOV, D. ROMANIUK, Ya. SASOV, O. BEIHUL, V. |
| author_sort |
ROMANIUK, O. |
| title |
ОПТИМІЗАЦІЯ МАС ОБЕРТАЛЬНИХ ВУЗЛІВ МЕХАНІЧНИХ ПЕРЕДАЧ МАШИННОГО АГРЕГАТУ |
| title_short |
ОПТИМІЗАЦІЯ МАС ОБЕРТАЛЬНИХ ВУЗЛІВ МЕХАНІЧНИХ ПЕРЕДАЧ МАШИННОГО АГРЕГАТУ |
| title_full |
ОПТИМІЗАЦІЯ МАС ОБЕРТАЛЬНИХ ВУЗЛІВ МЕХАНІЧНИХ ПЕРЕДАЧ МАШИННОГО АГРЕГАТУ |
| title_fullStr |
ОПТИМІЗАЦІЯ МАС ОБЕРТАЛЬНИХ ВУЗЛІВ МЕХАНІЧНИХ ПЕРЕДАЧ МАШИННОГО АГРЕГАТУ |
| title_full_unstemmed |
ОПТИМІЗАЦІЯ МАС ОБЕРТАЛЬНИХ ВУЗЛІВ МЕХАНІЧНИХ ПЕРЕДАЧ МАШИННОГО АГРЕГАТУ |
| title_sort |
оптимізація мас обертальних вузлів механічних передач машинного агрегату |
| title_alt |
Optimization of Rotating Assembly Masses in Mechanical Transmissions of Machine Units |
| description |
Introduction. The stabilization of kinematic and dynamic characteristics in machine assemblies, which exhibitperiodic changes during steady-state operation, has necessitated the development of methods for optimizing flywheel masses to enhance the productivity of machine executive bodies.Problem Statement. Stabilizing the parameters of machine assemblies with additional flywheel masses increases the overall weight and inertia of the mechanism. Therefore, it has become essential to design mechanicaltransmissions with optimized rotating assembly masses that can perform the function of flywheel masses.Purpose. This study has aimed to develop a method for estimating the mass of a rotary assembly in a mechanical transmission during the preliminary design stage, utilizing the power parameters of the machine unit.Materials and Methods. Analytical approaches have been employed to study the dependencies in a machineunit model and its rotary assembly, featuring cylindrical gears.Results. A functional dependence of the rotary assembly mass on torque, gear ratio, and the mechanical characteristics of gear wheel and shaft materials has been established. Mass coefficients for gears and shafts havebeen derived, allowing variation through material selection and heat treatment. This expands the range of optimization options and simplifies solving multivariate design problems.Conclusions. The proposed method for estimating the rotary assembly mass at the preliminary design stage,based on the machine unit’s power parameters, has shown promise. It provides a clear framework for aligning themasses of assembly components with the required flywheel moment, ensuring stabilization of the machine unit’skinematic and dynamic characteristics. |
| publisher |
PH “Akademperiodyka” |
| publishDate |
2025 |
| url |
https://scinn-eng.org.ua/ojs/index.php/ni/article/view/741 |
| work_keys_str_mv |
AT romaniuko optimízacíâmasobertalʹnihvuzlívmehaníčnihperedačmašinnogoagregatu AT chasovd optimízacíâmasobertalʹnihvuzlívmehaníčnihperedačmašinnogoagregatu AT romaniukya optimízacíâmasobertalʹnihvuzlívmehaníčnihperedačmašinnogoagregatu AT sasovo optimízacíâmasobertalʹnihvuzlívmehaníčnihperedačmašinnogoagregatu AT beihulv optimízacíâmasobertalʹnihvuzlívmehaníčnihperedačmašinnogoagregatu AT romaniuko optimizationofrotatingassemblymassesinmechanicaltransmissionsofmachineunits AT chasovd optimizationofrotatingassemblymassesinmechanicaltransmissionsofmachineunits AT romaniukya optimizationofrotatingassemblymassesinmechanicaltransmissionsofmachineunits AT sasovo optimizationofrotatingassemblymassesinmechanicaltransmissionsofmachineunits AT beihulv optimizationofrotatingassemblymassesinmechanicaltransmissionsofmachineunits |
| first_indexed |
2025-09-24T17:19:11Z |
| last_indexed |
2025-09-24T17:19:11Z |
| _version_ |
1850411220981514241 |
| spelling |
oai:ojs2.scinn-eng.org.ua:article-7412025-04-13T14:38:04Z ОПТИМІЗАЦІЯ МАС ОБЕРТАЛЬНИХ ВУЗЛІВ МЕХАНІЧНИХ ПЕРЕДАЧ МАШИННОГО АГРЕГАТУ Optimization of Rotating Assembly Masses in Mechanical Transmissions of Machine Units ROMANIUK, O. CHASOV, D. ROMANIUK, Ya. SASOV, O. BEIHUL, V. механічна передача, машинний агрегат, маховик, вузол, маса, зубчасте колесо, вал, крутний момент mechanical transmission, machine unit, flywheel, assembly, mass, gear wheel, shaft, torque. Introduction. The stabilization of kinematic and dynamic characteristics in machine assemblies, which exhibitperiodic changes during steady-state operation, has necessitated the development of methods for optimizing flywheel masses to enhance the productivity of machine executive bodies.Problem Statement. Stabilizing the parameters of machine assemblies with additional flywheel masses increases the overall weight and inertia of the mechanism. Therefore, it has become essential to design mechanicaltransmissions with optimized rotating assembly masses that can perform the function of flywheel masses.Purpose. This study has aimed to develop a method for estimating the mass of a rotary assembly in a mechanical transmission during the preliminary design stage, utilizing the power parameters of the machine unit.Materials and Methods. Analytical approaches have been employed to study the dependencies in a machineunit model and its rotary assembly, featuring cylindrical gears.Results. A functional dependence of the rotary assembly mass on torque, gear ratio, and the mechanical characteristics of gear wheel and shaft materials has been established. Mass coefficients for gears and shafts havebeen derived, allowing variation through material selection and heat treatment. This expands the range of optimization options and simplifies solving multivariate design problems.Conclusions. The proposed method for estimating the rotary assembly mass at the preliminary design stage,based on the machine unit’s power parameters, has shown promise. It provides a clear framework for aligning themasses of assembly components with the required flywheel moment, ensuring stabilization of the machine unit’skinematic and dynamic characteristics. Вступ. Необхідність стабілізації кінематичних та динамічних характеристик машинного агрегату, які мають періодичний характер зміни при усталеному режимі роботи, обумовлює пошук методів підбору махових мас для підвищення продуктивності виконавчого органу машини.Проблематика. Стабілізацію параметрів машинного агрегату забезпечують додаткові махові маси, що призводить до збільшення ваги механізму та його інерційності. Тому доцільно проєктувати нові механічні передачі з відповідними масами обертальних вузлів, які могли б виконувати функцію махової маси.Мета. Розроблення методу оцінки маси обертального вузла механічної передачі на етапі попереднього проєктування з використанням силових параметрів машинного агрегату.Матеріали й методи. Використано аналітичні методи дослідження залежностей, отриманих на основі моделі машинного агрегату та обертального вузла механічної передачі з циліндричними зубчастими колесами.Результати. Встановлено функціональну залежність маси обертального вузла механічної передачі від крутного моменту, передаточного числа та механічних характеристик матеріалів зубчастих коліс і валу. Введені коефіцієнти маси зубчастих коліс та валу дають можливість варіювати вибором матеріалу або термообробкою, що суттєво розширює діапазон пошуку оптимального варіанту та спрощує вирішення поставленої багатоваріантної задачі конструювання.Висновки. Запропонований метод оцінки маси обертального вузла механічної передачі на етапі попереднього проєктування на основі силових параметрів машинного агрегату є перспективним, оскільки відповідні силові характеристики та механічні властивості матеріалів зубчастих коліс та валів визначені однозначно. Такий підхід дозволить підібрати відповідну масу ланок складальних одиниць, моменти інерції яких відповідатимуть маховому моменту маховика, що, у свою чергу, забезпечить необхідну стабілізацію кінематичних та динамічних характеристик машинного агрегату. PH “Akademperiodyka” 2025-04-12 Article Article Рецензована стаття Peer-reviewed article application/pdf https://scinn-eng.org.ua/ojs/index.php/ni/article/view/741 10.15407/scine21.02.093 Science and Innovation; Том 21 № 2 (2025): Science and Innovation; 93-100 Science and Innovation; Vol. 21 No. 2 (2025): Science and Innovation; 93-100 2413-4996 2409-9066 10.15407/scine21.02 en https://scinn-eng.org.ua/ojs/index.php/ni/article/view/741/260 Copyright (c) 2025 Copyright Notice Authors published in the journal “Science and Innovation” agree to the following conditions: Authors retain copyright and grant the journal the right of first publication. Authors may enter into separate, additional contractual agreements for non-exclusive distribution of the version of their work (article) published in the journal “Science and Innovation” (for example, place it in an institutional repository or publish in their book), while confirming its initial publication in the journal “Science and innovation.” Authors are allowed to place their work on the Internet (for example, in institutional repositories or on their website). https://creativecommons.org/licenses/by-nc/4.0/ |