УМЕНЬШЕНИЕ ДЛИТЕЛЬНОСТИ РАЗРЯДНЫХ ТОКОВ И ПОВЫШЕНИЕ ИМПУЛЬСНОЙ МОЩНОСТИ В ЭЛЕКТРОИСКРОВОЙ НАГРУЗКЕ С НЕЛИНЕЙНЫМ СОПРОТИВЛЕНИЕМ

Simulation and analysis of transient processes at discharge of capacitor on electro-spark load, resistance of which is a function of current and changes under law U-like function are performed. Fulfilled studies revealed the advisability of decreasing of transient duration in electro-discharge syste...

Повний опис

Збережено в:
Бібліографічні деталі
Дата:2013
Автор: Супруновская , Н.И.
Формат: Стаття
Мова:Ukrainian
Опубліковано: Інститут електродинаміки НАН України, Київ 2013
Теми:
Онлайн доступ:https://techned.org.ua/index.php/techned/article/view/1190
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:Technical Electrodynamics

Репозитарії

Technical Electrodynamics
Опис
Резюме:Simulation and analysis of transient processes at discharge of capacitor on electro-spark load, resistance of which is a function of current and changes under law U-like function are performed. Fulfilled studies revealed the advisability of decreasing of transient duration in electro-discharge systems, which use discharge of capacitive energy storage on load with nonlinear resistance. The method for forced limitation of duration of discharge currents and increasing pulse power in electro-spark load is substantiated. This method consists in a changing of discharge circuit configuration of capacitive energy storage. The analysis of transient processes at bridging of electro-spark load by additional thyristor commutator, which is switched on at inadmissible discharge currents of overlong-duration in this load is carried out. The investigation of changing of pulse power dissipated in electro-spark load is fulfilled taking into account increasing of this load resistance and duration currents flowing in it. It was also studied the duration changing of pulse currents and pulse power in a load due to using a fully-controllable semi-conductor switch (for example GTO-module). The energy-effectiveness evaluation such method is made. References 10, tables 2, figures 6.