АДЕКВАТНІСТЬ ЕЛЕКТРИЧНОГО МОДЕЛЮВАННЯ РОБОЧИХ ПРОЦЕСІВ У ВІДЦЕНТРОВОМУ НАСОСІ
The article presents the results of study of electromagnetic processes in the electrical model of centrifugal pump with six blades with single-turn volute outlet. External characteristic of this model was constructed on the basis of these results. Comparative analysis of this constructed external ch...
Збережено в:
| Дата: | 2013 |
|---|---|
| Автори: | , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
Інститут електродинаміки НАН України, Київ
2013
|
| Теми: | |
| Онлайн доступ: | https://techned.org.ua/index.php/techned/article/view/1223 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Technical Electrodynamics |
Репозитарії
Technical Electrodynamics| Резюме: | The article presents the results of study of electromagnetic processes in the electrical model of centrifugal pump with six blades with single-turn volute outlet. External characteristic of this model was constructed on the basis of these results. Comparative analysis of this constructed external characteristic with Q-H characteristic of the pump, which is modeled, allows the authors to conclude about the feasibility of simulation and its adequacy to real workflows and possibility of practical application to improve the water supply system's efficiency. References 3, tables 2, figures 5. |
|---|