ОСОБЛИВОСТІ РЕГУЛЮВАННЯ РІВНЯ НАПРУГИ, ЩО СТАБІЛІЗУЄТЬСЯ, ЗА ДОПОМОГОЮ ПЕРЕТВОРЮВАЧА З ТРАНС ФОРМАТОРНО-КЛЮЧОВОЮ ВИКОНАВЧОЮ СТРУКТУРОЮ
The problem of voltage changer design that will maintain two types of transformation simultaneously (purposeful change of the voltage level and its stabilization at this level) is reasonable to solve by means of transformer-andswitches executive structures. The overall (idealized) and practically re...
Gespeichert in:
| Datum: | 2012 |
|---|---|
| 1. Verfasser: | |
| Format: | Artikel |
| Sprache: | Ukrainian |
| Veröffentlicht: |
Інститут електродинаміки НАН України, Київ
2012
|
| Schlagworte: | |
| Online Zugang: | https://techned.org.ua/index.php/techned/article/view/1353 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Technical Electrodynamics |
Institution
Technical Electrodynamics| Zusammenfassung: | The problem of voltage changer design that will maintain two types of transformation simultaneously (purposeful change of the voltage level and its stabilization at this level) is reasonable to solve by means of transformer-andswitches executive structures. The overall (idealized) and practically reachable Input-Output characteristics of such changers are examined in the research paper. It was proved that in spite of discretely-one manner, a smooth setpoint of stabilized voltage level is possible. It was shown that in case of need the stabilization at each level may happen over its range that is much wider than normalized range for all the levels in whole. References 4, figure 1. |
|---|