АВТОМАТИЗОВАНИЙ ПРИСТРІЙ ДЛЯ КОНТРОЛЮ ОСЕРДЯ СТАТОРА ПОТУЖНОГО ТУРБОГЕНЕРАТОРА
A device for automated control by the stator core of a powerful turbine generator (TG) during assembly and pressing at the manufacturing plant is proposed. Using the device, places in the core with a weakened solidity are determined. For this, at N points evenly spaced along the cross section of the...
Gespeichert in:
| Datum: | 2021 |
|---|---|
| Hauptverfasser: | , , |
| Format: | Artikel |
| Sprache: | Ukrainian |
| Veröffentlicht: |
Інститут електродинаміки НАН України, Київ
2021
|
| Schlagworte: | |
| Online Zugang: | https://techned.org.ua/index.php/techned/article/view/186 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Technical Electrodynamics |
Institution
Technical Electrodynamics| id |
oai:ojs2.ted.new-point.com.ua:article-186 |
|---|---|
| record_format |
ojs |
| spelling |
oai:ojs2.ted.new-point.com.ua:article-1862021-08-26T09:44:17Z AUTOMATED DEVICE FOR MONITORING THE STATOR CORE OF POWERFUL TURBOGENERATOR АВТОМАТИЗОВАНИЙ ПРИСТРІЙ ДЛЯ КОНТРОЛЮ ОСЕРДЯ СТАТОРА ПОТУЖНОГО ТУРБОГЕНЕРАТОРА Левицький, А.С. Зайцев, Є.О. Панчик, М.В. turbogenerator stator core assembly, pressing specific pressure control cell plastic element diaphragm with rigid center strain gages турбогенератор осердя статора збирання пресування питомий тиск контрольна комірка пластичний елемент мембрана з жорстким центром тензорезистори A device for automated control by the stator core of a powerful turbine generator (TG) during assembly and pressing at the manufacturing plant is proposed. Using the device, places in the core with a weakened solidity are determined. For this, at N points evenly spaced along the cross section of the stator core, the specific pressing pressure of special plastic elements, which are installed in the control cells of the additional pressure ring of the press, on which the core is assembled, is measured. During pressing, the elements are deformed, and their deformation depends on the degree of core defect (decrease in solidity) in the zone of which they are located. The sample will be deformed less, located in the zone of the largest defect, and most of all - in the zone where the defect is minimal. The pressure is measured using a flat metal membrane with a rigid center on which strain gauges are located at selected points. It is shown that the relative deformations in a flat membrane, which are measured by strain gages, depend on the value of the specific pressing pressure. Analytical relationships between the relative radial and tangential deformations and the specific pressing pressure have been determined. References 20, figures 5. Запропоновано пристрій для автоматизованого контролю осердя статора потужного турбогенератора підчас складання та пресування на заводі-виробнику. Використовуючи пристрій визначають місця осердя з ослабленою монолітністю. Для чого в N точках, рівномірно розташованих по перерізу осердя статора, вимірюють питомий тиск пресування спеціальних пластичних елементів, які встановлено в контрольних комірках додаткового натискного кільця пресу, на якому складають осердя. Під час пресування елементи деформуються, і їхня деформація залежить від величини дефекту осердя (зменшення монолітності), в зоні якого вони розташовані. Найменше буде деформована проба, розташована в зоні найбільшої величини дефекту, а найбільше – в зоні, де дефект мінімальний. Тиск вимірюють, використовуючи плоску металеву мембрану з жорстким центром, на якій в вибраних точках розташовано тензорезистори. Показано, що відносні деформації в плоскій мембрані, які вимірюються тензорезисторами, залежать від величини питомого тиску пресування. Визначено аналітичні залежності між відносними радіальними та тангенціальними деформаціями і питомим тиском пресування. Бібл. 20, рис. 5. Інститут електродинаміки НАН України, Київ 2021-08-26 Article Article application/pdf https://techned.org.ua/index.php/techned/article/view/186 10.15407/techned2021.05.083 Tekhnichna Elektrodynamika; No. 5 (2021): TEKHNICNA ELEKTRODYNAMIKA; 083 ТЕХНІЧНА ЕЛЕКТРОДИНАМІКА; № 5 (2021): ТЕХНІЧНА ЕЛЕКТРОДИНАМІКА; 083 2218-1903 1607-7970 10.15407/techned2021.05 uk https://techned.org.ua/index.php/techned/article/view/186/159 Авторське право (c) 2021 ТЕХНІЧНА ЕЛЕКТРОДИНАМІКА https://creativecommons.org/licenses/by-nc-nd/4.0 |
| institution |
Technical Electrodynamics |
| baseUrl_str |
|
| datestamp_date |
2021-08-26T09:44:17Z |
| collection |
OJS |
| language |
Ukrainian |
| topic |
турбогенератор осердя статора збирання пресування питомий тиск контрольна комірка пластичний елемент мембрана з жорстким центром тензорезистори |
| spellingShingle |
турбогенератор осердя статора збирання пресування питомий тиск контрольна комірка пластичний елемент мембрана з жорстким центром тензорезистори Левицький, А.С. Зайцев, Є.О. Панчик, М.В. АВТОМАТИЗОВАНИЙ ПРИСТРІЙ ДЛЯ КОНТРОЛЮ ОСЕРДЯ СТАТОРА ПОТУЖНОГО ТУРБОГЕНЕРАТОРА |
| topic_facet |
turbogenerator stator core assembly pressing specific pressure control cell plastic element diaphragm with rigid center strain gages турбогенератор осердя статора збирання пресування питомий тиск контрольна комірка пластичний елемент мембрана з жорстким центром тензорезистори |
| format |
Article |
| author |
Левицький, А.С. Зайцев, Є.О. Панчик, М.В. |
| author_facet |
Левицький, А.С. Зайцев, Є.О. Панчик, М.В. |
| author_sort |
Левицький, А.С. |
| title |
АВТОМАТИЗОВАНИЙ ПРИСТРІЙ ДЛЯ КОНТРОЛЮ ОСЕРДЯ СТАТОРА ПОТУЖНОГО ТУРБОГЕНЕРАТОРА |
| title_short |
АВТОМАТИЗОВАНИЙ ПРИСТРІЙ ДЛЯ КОНТРОЛЮ ОСЕРДЯ СТАТОРА ПОТУЖНОГО ТУРБОГЕНЕРАТОРА |
| title_full |
АВТОМАТИЗОВАНИЙ ПРИСТРІЙ ДЛЯ КОНТРОЛЮ ОСЕРДЯ СТАТОРА ПОТУЖНОГО ТУРБОГЕНЕРАТОРА |
| title_fullStr |
АВТОМАТИЗОВАНИЙ ПРИСТРІЙ ДЛЯ КОНТРОЛЮ ОСЕРДЯ СТАТОРА ПОТУЖНОГО ТУРБОГЕНЕРАТОРА |
| title_full_unstemmed |
АВТОМАТИЗОВАНИЙ ПРИСТРІЙ ДЛЯ КОНТРОЛЮ ОСЕРДЯ СТАТОРА ПОТУЖНОГО ТУРБОГЕНЕРАТОРА |
| title_sort |
автоматизований пристрій для контролю осердя статора потужного турбогенератора |
| title_alt |
AUTOMATED DEVICE FOR MONITORING THE STATOR CORE OF POWERFUL TURBOGENERATOR |
| description |
A device for automated control by the stator core of a powerful turbine generator (TG) during assembly and pressing at the manufacturing plant is proposed. Using the device, places in the core with a weakened solidity are determined. For this, at N points evenly spaced along the cross section of the stator core, the specific pressing pressure of special plastic elements, which are installed in the control cells of the additional pressure ring of the press, on which the core is assembled, is measured. During pressing, the elements are deformed, and their deformation depends on the degree of core defect (decrease in solidity) in the zone of which they are located. The sample will be deformed less, located in the zone of the largest defect, and most of all - in the zone where the defect is minimal. The pressure is measured using a flat metal membrane with a rigid center on which strain gauges are located at selected points. It is shown that the relative deformations in a flat membrane, which are measured by strain gages, depend on the value of the specific pressing pressure. Analytical relationships between the relative radial and tangential deformations and the specific pressing pressure have been determined. References 20, figures 5. |
| publisher |
Інститут електродинаміки НАН України, Київ |
| publishDate |
2021 |
| url |
https://techned.org.ua/index.php/techned/article/view/186 |
| work_keys_str_mv |
AT levicʹkijas automateddeviceformonitoringthestatorcoreofpowerfulturbogenerator AT zajcevêo automateddeviceformonitoringthestatorcoreofpowerfulturbogenerator AT pančikmv automateddeviceformonitoringthestatorcoreofpowerfulturbogenerator AT levicʹkijas avtomatizovanijpristríjdlâkontrolûoserdâstatorapotužnogoturbogeneratora AT zajcevêo avtomatizovanijpristríjdlâkontrolûoserdâstatorapotužnogoturbogeneratora AT pančikmv avtomatizovanijpristríjdlâkontrolûoserdâstatorapotužnogoturbogeneratora |
| first_indexed |
2025-09-24T17:37:42Z |
| last_indexed |
2025-09-24T17:37:42Z |
| _version_ |
1844167796458520576 |