КЕРУВАННЯ ПЕРЕТВОРЮВАЧАМИ ВІДНОВЛЮВАНИХ ДЖЕРЕЛ ЕНЕРГІЇ В РЕЖИМІ «МЕРЕЖА-ВЕДУЧИЙ/ВЕДЕНИЙ»
Have been proposed the new control framework for converters of renewable energy sources (RES-C), based on choosing their operation mode – grid-forming or grid-following in depends on the dynamic stiffness (DS) of the power system for some bus i (control point), where we can observe arbitrary disturb...
Збережено в:
| Дата: | 2021 |
|---|---|
| Автор: | |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут електродинаміки НАН України, Київ
2021
|
| Теми: | |
| Онлайн доступ: | https://techned.org.ua/index.php/techned/article/view/263 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Technical Electrodynamics |
Репозитарії
Technical Electrodynamics| Резюме: | Have been proposed the new control framework for converters of renewable energy sources (RES-C), based on choosing their operation mode – grid-forming or grid-following in depends on the dynamic stiffness (DS) of the power system for some bus i (control point), where we can observe arbitrary disturbance. In the proposed RES-C control framework, in cases of small values of DS around bus i, used the grid-forming control mode of RES-C, and in cases of large values of DS around bus i, used the grid-following control mode of RES-C. Operation mode of RES-C can be changing in depends on measured DS values for bus i of a power system. References 4, figures 2. |
|---|