ВПЛИВ ЧАСТОТИ МОДУЛЯЦІЇ НА ТОЧНІСТЬ ВИЗНАЧЕННЯ МІСЦЯ КОРОТКОГО ЗАМИКАННЯ ЗА МЕТОДОМ БІЖУЧИХ ХВИЛЬ
This paper investigates the impact of sampling frequency on the effectiveness of travelling wave-based fault detection and location in cases when the fault is very close to the relay location. The arrival times of consecutive reflected travelling waves in such situations may result in errors if the...
Збережено в:
| Дата: | 2020 |
|---|---|
| Автори: | , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Інститут електродинаміки НАН України, Київ
2020
|
| Теми: | |
| Онлайн доступ: | https://techned.org.ua/index.php/techned/article/view/351 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Technical Electrodynamics |
Репозитарії
Technical Electrodynamics| Резюме: | This paper investigates the impact of sampling frequency on the effectiveness of travelling wave-based fault detection and location in cases when the fault is very close to the relay location. The arrival times of consecutive reflected travelling waves in such situations may result in errors if the sampling frequency of the relay is too low. Effectively, this will limit the accuracy of estimated fault location. This issue is investigated by simulating a fault close to the relay and observing the extracted voltage travelling waves for different sampling frequencies. The results confirm a strong correlation and prove that high accuracy will require higher sampling frequencies. References 7, figures 4. |
|---|