МАГНІТНІ СИЛИ І СТРУМИ ІНДУКТОРА ДЛЯ МАГНІТНО-ІМПУЛЬСНОЇ ОБРОБКИ ЗВАРНИХ З’ЄДНАНЬ НЕМАГНІТНИХ ТОНКОЛИСТОВИХ МЕТАЛІВ

• Дата: 2020
• Автори: Ращепкин , А.П., Кондратенко, І.П., Карлов, О.М., Крищук, Р.С.
• Формат: Стаття
• Мова: Ukrainian
• Опубліковано: Інститут електродинаміки НАН України, Київ 2020
• Теми: магнітно-імпульсна обробка; імпульсний індуктор; перехідні процеси; П-подібний магнітопровід
• Онлайн доступ: https://techned.org.ua/index.php/techned/article/view/354
• Назва журналу: Technical Electrodynamics

In order to eliminate residual stresses in the welds of thin-sheet non-magnetic metals, the possibility of using magnetic pulse processing is considered. An electromagnetic inductor with a U-shaped magnetic circuit and two coils of solid conductor is considered. To create a unipolar current pulse in the inductor winding, a trinistor is used, which switches the electrical circuit from the capacitor, inductance and active resistance, and when the current in the inductor winding reaches zero, the circuit opens. The calculation of the transient process in an electric circuit with a dynamically changing inductance is performed by solving a circuit-field problem with given initial conditions. The calculation of the electromagnetic field is performed by the finite element method for a two-dimensional model of the inductor. The study of electromagnetic processes in the inductor and thin-sheet non-magnetic workpieces with the amplitude of the maximum current density of 1 kA/mm2. The distribution of current density and magnetic force density on the workpiece surface and in time is given. It is proved that only for a small thickness of welded products (2 mm) can be achieved simultaneous power and current. References 9, figures 4.