НЕЧІТКЕ КЕРУВАННЯ ЕЛЕКТРОПРИВОДОМ КОНТУРА СТАБІЛІЗАЦІЇ ЗУСИЛЛЯ РІЗАННЯ ЗА НАЯВНОСТІ ЗБУРЕНЬ КОЛИВАЛЬНОГО ХАРАКТЕРУ

• Дата: 2019
• Автори: Торопов, А.В., Босак, А.В.
• Формат: Стаття
• Мова: Ukrainian
• Опубліковано: Інститут електродинаміки НАН України, Київ 2019
• Теми: система стабілізації зусилля різання; нечіткий регулятор; гармонічний характер збурень; інерційність процесу різання; моделювання
• Онлайн доступ: https://techned.org.ua/index.php/techned/article/view/507
• Назва журналу: Technical Electrodynamics

The article deals with a problem of designing a fuzzy regulator for the stabilizing system of cutting force tangential component, which makes possible to increase the productivity of equipment and the reliability of machine tools.  The structure of the fuzzy controller with the input signal of the set value of the cutting force stabilizing component on the basis of the analysis of the structure of fuzzy regulators using different methods of derivation of the output signal is developed. In order to take into account, the effect of allowance changing during the work piece processing of the, it is proposed to use oscillation link at whose input the sequence of impulse functions arrives. Investigation of the dynamic characteristics of the force stabilization system using the MATLAB application package, taking into account the harmonic oscillations of the allowance and the nonlinear dependence of the cutting force on the feed, is performed. The analysis of the obtained transients of cutting force tangential component is carried out. The possibility of practical implementation of the system of cutting force stabilization in the modern machines with semiconductor converters and microprocessor control unit is shown.  References 10, figures 6, table 1.