ІМПУЛЬСНЕ ДЖЕРЕЛО ЖИВЛЕННЯ ДЛЯ КОНТАКТНОГО МІКРОЗВАРЮВАННЯ З ЛАНКОЮ РЕГУЛЮВАННЯ ПОТУЖНОСТІ В БЕЗПЕРЕРВНОМУ РЕЖИМІ
In this paper, a topology of pulse power supply for micro resistance welding machine with the link of power regulation in continuous mode is suggested: the pulse converter generates the main part of the output power, when the small-power linear converter compensates the pulsations. The mathematical...
Збережено в:
| Дата: | 2018 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
Інститут електродинаміки НАН України, Київ
2018
|
| Теми: | |
| Онлайн доступ: | https://techned.org.ua/index.php/techned/article/view/643 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Technical Electrodynamics |
Репозитарії
Technical Electrodynamics| Резюме: | In this paper, a topology of pulse power supply for micro resistance welding machine with the link of power regulation in continuous mode is suggested: the pulse converter generates the main part of the output power, when the small-power linear converter compensates the pulsations. The mathematical models of the circuit principal units are created. The high accuracy of welding pulses generation of power supply is confirmed through simulation. It is shown that the power pulsation in load is more than five times reduced, while the high efficiency of the power supply is kept. References 5, figures 5. |
|---|